Loading...
HomeMy WebLinkAbout2653 Establishing Horizontal and Vertical Datums for Surveying and MappingOrdinance No. ~,~ ~ ~-~ AN ORDINANCE OF THE CITY OF PORT TOWNSEND ESTABLISHING CITY HORIZONTAL AND VERTICAL DATUM~ FOR SURVEYING AND MAPPING PURPOSES, AND REPEALING AND REPLACING CHAPTER 1.08, DATUM LINE AND BENCH MARKS, OF THE PORT TOWNSEND MUNICIPAL CODE WHEREAS, horizontal and vertical datums are referenced by coordinate values of geodetic and survey reference control points established by the federal government and adjusted periodically for accuracy, upon which surveys are based; and WHEREAS, a vertical datum of the City of Port Townsend was adopted in 1887, which is now obsolete, outdated, and/or superseded by this new ordinance; and WHEREAS, it is desirable for surveying and mapping purposes that current and accurate datums are adopted in order to provide for the perpetuation of accurate and uniform horizontal and vertical locations; and WHEREAS, the City Council concluded on December 18, 1995 (Resolution 95-122), that a standardized monumentation system would be beneficial for the City of Port Townsend; and WItEREAS, Polaris Engineering and Surveying, Inc. was selected and hired to perform the monumentation survey; and WHEREAS, the monumentation survey has been completed by Polaris and has been recorded with the Jefferson County Assessor, Volume 19 of Surveys, pages 61-70. NOW, THEREFORE, the City Council of the City of Port Townsend does ordain as follows: SECTION 1. Chapter 1.08 is hereby repealed in its entirety and replaced as follows: Chapter 1.08 HORIZONTAL AND VERTICAL DATUM, COORDINATE SYSTEM Sections: 1.08.010 1.08.020 system. Horizontal and vertical datum, coordinate system adopted. Plans to conform to adopted horimntal and vertical datums and coordinate 1.08.010 Horizontal and vertical datum, coordinate system adopted. The City of Port Townsend horizontal datum is hereby identified as the North American Datum of 1983, Adjustment 1991, NAD !983(91), with coordinate values expressed as "Washington Coordinate System of 1983, North Zone," and the City of Port Townsend vertical datum is hereby identified as North American Vertical Datum 1988 (NAVD 88). The datums are shown on the Record of Survey filed in Volume 19 of Surveys Pages 61-70, Records of Jefferson County, Washington, which is hereby incorporated by reference. (Ord. __ § 1, 1998.) 1.08.020 Plans to conform to adopted horizontal and vertical datums and coordinate system. Improvements, subdivisions, mapping and other plans and documents requiring horizontal and vertical location within the city limits of Port Townsend shall reference and be based on and in accordance with the datums identified in the Record of Survey. In addition, whenever l:rrMC Titles 12, 13, 17, 18 and/or the engineering design standards require surveyed plans, such plans must conform to the adopted horizontal and vertical datums and coordinate system. Any plans submitted which do not so conform will not be accepted by the city. (Ord. § 1, 1998.) SECTION 2. If any clause, sentence, paragraph, section or part of this Ordinance or its application to any person or circumstance is held to be invalid or unconstitutional by a court of competent jurisdiction, such order or judgment shall not affect the validity or constitutionality of the remainder of any part of this ordinance. To this end, the provisions of each clause, sentence, paragraph, section or part of this law are declared severable. This ordinance shall take effect and be in force five days after the date of its publication in the manner provided by law. Read for the first, second, and third times and adopted by the City Council of the City of Port Townsend, Washington, at a regular meeting thereof, held this 6th day of July, 1998. Attest: 06/24/98 Ord\{Datuml08.doo} Julie ~Culloch, Mayor Approved as to Form: 2 Ord.