HomeMy WebLinkAboutBLD06-127r
City of Port Townsend
Development Services Department
250 Madison Street, Suite 3
Port Townsend, WA 98368
Phone (360) 379 -5095 Fax (360) 344 -4619
CITY OF PORT TOWNSEND
SIGN BUILDING PERMIT & INSPECTION RECORD
THIS CARD MUST BE POSTED AT CONSTRUCTION SITE
Call 385-2294 by 3:00 PM for Next Day Inspection
Permit Number: BLD06 -127 Issued: 06/29/06
Job Address: 230 Ta lor.Street Zoning: CC -III(
Nature of Work: Install progectine sign into side of First American National Bank building.
Use of Building: Retails ace for Quimper Sound & Analog Lounge
Building Owner: Dan Veenstra
Contractor: Discovery Bay Construction
Business Owners: Steve & Beth Wilmart
Sign has been approved by sign permit SNP06 -013 and colors /design administratively approved
through HPC06 -008 on June 20, 2006.
GENERAL CONDITIONS APPLY— SEE BELOW
I r 193.11
FRAMING/FINAL
Sign attached to side of building by sleeve -type
anchors specified for anchorage into concrete,
masonry, and grout -filled block. See attached
drawing for details.
APPKO V ED /DA'I'S
GENERAL CONDITIONS
1. Owner or owner's agent shall review and oversee correction of any and all deficiencies noted by required
inspections.
2. Re- inspection is required after any corrections are completed.
3. All building permits expire if no progress has been made within six months, or if no inspections are done
by the Building Department within one year. Call for at least one inspection per year to keep your
building permit active.
4. Revisions to the approved plans require submittal and approval prior to making changes in the field.
Contact the Building Department at 379 -5095 prior to making changes to the approved plans.
5. POST THIS PERMIT ON -SITE WITH THE APPROVED PLANS.
Call 48 Hours Before You Dig For Utility Line Locates
1- 800 - 424 -5555
Page 1 of 1.
City of Port Townsen
BUILDING PERMIT APPLICATION
SIGN INSTALLATION
Name (Legal Owner(s))
Projecting Sign - if the sign projects over a
Mailing Address
Other- please describe:
Phone ,
public right -of way area or sidewalk, i.e. where
Permit # 6 L DD(p 12 `7
Property Street Address
2. Do you have the property owner's approval to install the sign(s)?
Zoning District
Parcel #
Legal Description: Addition
Block Lot(s)
Contractor's Name
Mailing Address ,b �x
l
Phone So ' l
State License Number �. �c
City Business License Number:
Valuation: $
Please check all that apply for the type of sign you are installing:
Please check the Information that you are submitting with this application:
Projecting Sign - if the sign projects over a
Please check YES or NO as applicable
Other- please describe:
public right -of way area or sidewalk, i.e. where
Bolting Specifications, if applicable
2. Do you have the property owner's approval to install the sign(s)?
the public walks under it.
3. Do you have an authorized sign permit? If yes, please indicate SNP #
Monument Sign _.. if over 5 feet in height.
Please check the Information that you are submitting with this application:
Special Conditions
YES
Site Plan -ST S�u ✓� c
Please check YES or NO as applicable
Sign Attachment Detail /Section
Sign Locate Plan (Elevation View)
Bolting Specifications, if applicable
Special Conditions
YES
NO
Please check YES or NO as applicable
1. Is the property within the Port Townsend Historical District? If yes, HPC #
2. Do you have the property owner's approval to install the sign(s)?
3. Do you have an authorized sign permit? If yes, please indicate SNP #
dt
rvi
I
�ILL
0
ip
I
K7.m
0
i
is 1
4T� 'AKA�l
T\.b �
Dynabolt Sleeve Anchor 06/29/2006 04:18 PM
rr' Reneref. IUd 14114
ANCNOR/NC SYSTEMS
e
......................
Search
or go to the Advance Search
fror
Product Information and Suggested Specifications
Selection and Order Information : Installation Instructions
Performance Data : Approvals and Listing
Versatile, :sleeve Type Anclior- ...
Medium - Dirty SPECIFIED FOR ANCHORAGE INTO CONCRETE, MASONRY, GROUT - FILLED
Sleeve Anchor BLOCK AND HOLLOW BLOCK
Sleeve type anchors feature a split expansion sleeve over a
threaded stud bolt body and integral expander, nut and washer.
W Anchors are made of Plated Carbon Steel, or Type 18 -8 Stainless
Steel.
Anchors should be installed with carbide tipped hammer drill bits made in
accordance to ANSI B212.15 -1994.
Anchors are tested to ASTM E488 criteria.
Anchor diameter equals hole diameter
Available in hex head and six other head styles
Available 1/4 - 3/4" diameter up to 6 -1/4" length
Zinc plated carbon steel and 304 stainless steel
Provides full 3600 hole contact over large area and reduces concrete stress
Heavy - loading capacity
Preassembled for faster, easier installations
Dynabolt can be installed through object to be fastened
Sleeve design improves holding power
No pre- spotting of holes necessary
http:// www. ramset-- redhead,comIdynaboIt- prod01.asp Page 1 of 2
•
pgHT Tp
�o "� CITY OF PORT TOWNSEND
y ` DEVELOPMENT SERVICES DEPARTMENT
INSPECTION REPORT
WA
PERMIT NUMBER: ` 1 02 `7
SITE ADDRESS:
CONTRACTOR:
DATE OF INSPECTION:
WORKSITE OR CELL PHONE #:
TYPE OF INSPECTION REQUESTED:
�1
For inspections, call the Inspection Line at 360 -385 -2294 by 3:00 PM the day before you want
the inspection. For Monday inspections, call by 3:00 PM Friday.
APPROVED ❑ APPROVED WITtI CORRECTIONS ❑ NOT APPROVED
NOTED BELOW CALL, FOR RE- INSPECTION
BEFORE PROCEEDING
Approved plans and permit card must be on -site and available at time of inspection. A re- inspection
fee may be assessed if work is not ready for inspection. /
Inspector Date
Acknowledged Date