HomeMy WebLinkAboutBLD07-207 oversize drawings not scannedIi
BIJILDING PERMIT
City of Port Townsend
Development Services Department
250 Madison Street, Suite 3, Port Townsend, WA 98368
(360)379-s09s
Proiect Information
Permit Type Commercial Tenant Improvement
Site Address 111 QUINCY STREET
Project Description
Installation of fire sprinkler system in Cannery Ruilding
Permit #
Project Name
Parcel #
BLD07-207
CANNERY
931600204
Names Associsted with this Project
Type Name
Applicant Fox Fire Prevention
Owner Harris Kevin
Contractor Fox Fire Prevention Inc
Contractor Fox Fire Prevention Inc
Contact Phone #
License
Type License # Exp Date
(360) 344-3220
(360) 871-198s
(360) 871-1e85
CITY
STATE
1718 t2l3t/2007
FOXFIPI l27Mt 07101 /2008
Fee Information Project Details
Fire Sprinkler System - Commercial
Fire Sprinkler System - ResidentialProject Valuation
Building Permit Fee
Plan Review Fee
State Building Code Council Fee
Technology Fee for Building Permit
Record Retention Fee for Building
Permit
$ r s.750.00
265.25
172.41
4.54
5.3 I
10.00
3,000 SQFT
3,000 SQFT
Total Fees s1s7.47
Call 385-2294 by 3:00pm for next day inspection.
Permits expire 180 days from issuance if work is not commenced, or if work is suspended for a period of 180
days. Work is verified by obtaining a valid inspection.
The granting of this permit shall not be construed as approval to violate any provisions of the PTMC or other laws or regulations. I certify
that the infonnation provided as a part of the application for this permit is true and accurate to the best of my knowledge. I further cerlify
that I am the owner of the property or authorized agent of the owner
Datelssued: 1212612007
Issued By: SFOSTER
Print Name trt09^j'tu H{)lst lznl
)
City of Port Townsend
Development Services Department
250 Madison Street, Suite 3, Port Townsend, WA 98368
(360)379-s095 FAX (360) 344-4619
December 26.2007
Fox Fire Prevention, Inc.
P.O. Box 594
Port Orchard, WA 98368
ATT: Sue
Enclosed is the permit for your work at the Cannery building in Port Townsend.
The green Building Permit card needs to be signed on the bottom (where it says Please print!).
The Permit, progress card and that entire package of plans and specs in the rubber band need to
be kept on the job site, available to the inspector when he comes for air inspection.
Please note that seven required inspections are noted on the inspection card and that the
Please sign the white copy of the Building Permit and return it to me in the enclosed envelope.
I received you check today and receipt for that payment is also enclosed-
If you have any questions about the permit, please call me at any time-
Regards,
Scottie Foster
Administrative Assistant
Cify of Port Townsend
Development Services Department
250 Madison Street, Suite 3, Port Townsend, WA 98368
(360)379-s09s
BIJILDING PtrRMIT
Project Information
Permit Type Commercial Tenant Improvement
SiteAddress lll QUINCYSTREET
Project Description
Installation of fire sprinkler system in Cannery Building
Permit #
Project Name
Parcel #
BLD07-207
CANNERY
937600200
Names Associated with this Project
Type Name
Applicant Fox Fire Prevention
Owner 'Harris Kevin
Contractor Fox Fire Prevention Inc
Contractor Fox Fire Prevention Inc
Contact Phone #
(360) 344-3220
(360) 871-1985
(360) 871-re8s
License
Type License # Exp Date
CITY
STATE
l7l8 t2/3U2007
FOXFIPI l 27Mt 0710 I /2008
Fee Information
Project Valuation {r 5 7so oo
Project Details
Fire Sprinkler System - Commercial
rrrs JPrrlrl(r€r Jysrcrn -
3,000 SQFT
Building Permit Fee
Plan Review Fee
State Building Code Council Fee
Technology Fee for Building Permit
Record Retention Fee for Building
Permit
Total Fees
26s.25
t72.41
4_50
5.31
10.00
$457 -47
Call 385-2294 by 3:00pm for next day inspection.
Permits expire 180 days from issuance if work is not commenced, or if work is suspended for a period of 180
days. Work is verified by obtaining a valid inspection.
The granting of this permit shall not be construed as approval to violate any provisions of the PTMC or other laws or regulations. I certifli
that the inlormation provided as a part of the application for this permit is true and accurate to the best of my knowledge. I further certify
that I am the owner ofthe property or authorized agenf ofthe owner,
Print Name Datelssued: 12126/200'l
Issued By: SFOSTER
CO
N
S
T
R
U
C
T
I
O
N
PR
O
G
R
E
S
S
RE
C
O
R
D
CI
T
Y
OF
P
De
v
e
l
o
p
m
e
n
t
RT
TO
W
N
S
E
N
D
er
v
i
c
e
s
De
p
a
r
t
m
e
n
t
25
0
Ma
d
i
s
o
n
St
r
e
e
t
.
3.
Po
r
t
To
w
n
s
e
n
d
.
WA
98
3
6
8
PO
S
T
TH
I
S
CA
R
D
IN
A
SA
F
E
,
CO
N
S
P
I
C
U
O
U
S
LO
C
A
T
I
O
N
.
PL
E
A
S
E
DO
NO
T
RE
M
O
V
E
S
NO
T
I
C
E
UN
T
I
L
AL
L
RE
Q
U
I
R
E
D
IN
S
P
E
C
T
I
O
N
S
AR
E
MA
D
E
AN
D
SI
G
N
E
D
OFF
BY
TH
E
AP
P
R
O
P
R
I
A
T
E
AU
T
H
O
R
I
W
AN
D
TH
E
BU
I
L
D
I
N
G
IS
AP
P
R
O
V
E
D
FO
R
OC
C
U
P
ST
A
M
P
E
D
AP
P
R
O
V
E
D
PL
A
N
S
MU
S
T
BE
AV
A
I
L
A
B
L
E
ON
TH
E
JO
B
S
I
T
E
.
PA
R
C
E
L
NO
,
93
7
6
0
0
2
0
0
PE
R
M
I
T
NO
,
BL
D
0
7
-
2
0
7
IS
S
U
E
D
DA
T
E
12
1
2
6
1
2
0
0
7
E)
(
P
I
R
A
T
I
O
N
DATE 06t2312008
AD
D
R
E
S
S
1,
1
1
QU
I
N
C
Y
ST
R
E
E
T
CO
N
S
T
R
U
C
T
I
O
N
TY
P
E
OC
C
U
P
A
N
T
LOAD
OW
N
E
R
HA
R
R
I
S
KE
V
I
N
P
EC
T
DE
S
C
R
I
P
T
I
O
N
ln
s
t
a
l
l
a
t
i
o
n
of
fl
r
e
sp
r
i
n
k
l
e
r
sv
s
t
e
m
in
Ca
n
n
e
r
v
Buildinq
CO
N
T
R
A
C
T
O
R
FO
X
FI
R
E
P
LE
N
D
E
R
IN
S
P
E
C
T
I
O
N
IN
S
P
DA
T
E
CO
M
M
E
N
T
S
IN
S
P
E
C
T
I
O
N
IN
S
P
DA
T
E
COMMENTS
FP
P
-
U
N
D
G
R
N
.
S
U
P
P
FP
P
.
R
O
U
G
H
-
P
I
P
E
FP
P
.
P
R
E
S
S
.
T
E
S
T
FP
P
.
T
E
S
T
.
A
C
C
FI
N
A
L
PU
B
L
I
C
WO
R
K
S
FI
R
E
.
F
I
N
A
L
FI
N
A
L
BU
I
L
D
I
N
G
TO
RE
Q
U
E
S
T
AN
IN
S
IN
S
P
E
C
T
I
O
N
RE
Q
U
E
S
T
S
MU
S
T
BE
RE
C
E
I
V
CA
L
L
(3
6
0
)
38
s
-
2
2
e
4
.
TO
3:
0
0
PM
FO
R
NE
X
T
DA
Y
IN
S
P
E
C
T
I
O
N
.
PR
I
O
R
ITY OF PORT TOWNSEND
PERMTT ACTIVITY LOG
I
(
PERMIT# I3LbOT DATE RECETVED q-2 -h7
SCOPE OF WORK:
DATE ACTION INITIALSrn-4-n1 ENTERED INTO CHET Wt[
CA - to Plannine - No evidence I
CHECKED FOR COMPLETENESS
lD-4-07
a
tl- 7b'o1 fu,L /4-/Y-
/z -/7-f,ry Cr;/4rg ,&tr:-r ,/@r>SF-ro Fp//ri/t s
1z -26*0 /I +str
)
CITY OF PORT TOWNSEND
DEVELOPMENT SERVICES DEPARTMENT
INSPECTION REPORT
For inspections, call the Inspection Line at 360-385-2294 by 3:00 PM the day before you want
the inspection. For Monday inspections, call by 3:00 PM Friday.
DATE OF,INSPECTION: ?"^ / . g PERMIT NUMBER:A,- e? - 2o7
SITE ADDRESS: ./.t,/JT
PROJECT NAME:CONTRACTOR:
CONTACT PERSON:PHONE:
TYPE OF'INSPECTION:,L**-/-- .4-"8- %'/ '/"-t a
,z_
h/.1*o.
\e
_.2'APPROVED ! APPROVED WITH
CORRECTIONS
Ok to proceed. Corrections will be
checked at next inspection
! NOTAPPROVED
Call for re-inspection before
proceeding.
Date 7- /- /
Approved and permit card must be on-site and available at time of inspection. A re-inspection fee may
be assessed ifwork is not ready for inspection.
lnspection Report
Project Permit #RLD,zo7
Inspection & Notes
I
\
Date Inspector
t/t/as Tflurtuk b
?-2, /ffitnturl,t,2 I N/<L€72.e"r.t E,n
2
\
CITY OF PORT TOWNSEND
DEVELOPMENT SERVICES DEPARTMENT
INSPECTION REPORT
For inspections, call the Inspection Line at 360-385-2294 by 3:00 PM the day before you want
the inspection. For Monday inspectionso call by 3:00 PM Friday.
DATEOFINSPECTION: A9 JA/ A6 PERMITNUMBER: AL2d7 -2O7
SITE ADDRESS: / // /lu/tl/./Y .f r
PROJECT NAME: &*YU EAr
CONTACT PERSON: ,fue
TYPE OF'INSPECTION:
coNrRACroR: ftX ftlZE ?%-7/,
PHONE:
t*unm *rtc Plrc, <P 2-ti/ zt-E:L9* zz:t t
@
(a /rrtauzr,?tPztA./,DZZe..rlua 3&
6 A.Lf2s-z* .fu<.*t 4<Zty-.lt€ :&
A peassuz ,;Er- Z4dezlrt-ft6s4Z>
Azn4ozzu 6,tatK ar'*/, ay[?EeVlru ---
&A4/, ^6cD /rtLfp 6Z 4u/z/2,4*t7d7/
! APPROVED ! APPROVED WITH
CORRECTIONS
Ok to proceed. Corrections will be
checked at next inspection
N NOTAPPROVED
Call for re-inspection before
proceeding.
Inspector fiMu*Date t* vrt*V o B
Approved plans and permit card must be on-site and availa'ble at time of inspection. A re-inspection fee may
be assessed if work is not ready for inspection.
SEP-il3-tilil$ !{E$ *l:33 A}+1 P.0il1/ilil3
F X FAX
F( FIHEPHEI/ENTION,INC.
P.o. BCX5g4
FORT OHGHAHq WA,SHINGTOI{ cE:rs6
{3$O} $71-1985
{2$6} SgBrPgg3Seettle
FAX: {3so} S7l-ta€z
TO:
Contrts(rtotrs Flegistretiolt
FOXFIFIIITMS
3
OATE:zaa8-/
FAX,.b 7vv- L#{NUB'BEROFPAGES:q -5
{lnclude*this soyer Frgs)
ArrN: Augx frr/&u .I)suF.l:d{
fr
sEP 3 2008
CIIY OF
E
TO!\JNSEND
$EP-il3-1ilil8 tl{t$ ili:3$ Ah4 D nfl1I ' UU I
F X FAX
r&rcx frM6u l]
F[ .,F|RE PHEVENTTON, tNC,
R.o. BSX5g4
POHT ORCHARB, WASHINGTGN 98366
{360} S71-1sS5
{2S6} Sg3"Pgg3Seenle
FA){: {36*} S71-e26?
DATE:7 /:/Z+aF
NUMBEROF PAGEE:.3
tttis coyer pagel
,*4
TO:
FAI(:
ATTN:
contractfi f s Ftregistrathn
troxFtFI127M8
3 {
fl
5tP-03-tililfi !vE0 ili:$$ All
PROCEDURE
Upon complelion of worlg
awnefs representattve. All
the job.
p flll'
))
." CONTRACTOR$' MATERIALS & TEST BEFSRT FOR ABOVEGRCII'hItr PIPIITIG
EEIE-h
ruffitr
inspection and test shall_ be rnade nI tlg contractar's represertative anrl witne€sed by sndefects shall be corrected and *y*tem lett in service befare eontractor'* personnel finalty leave
A cedificate shall be filled out and signed by both representative$. Copies shall be prepared for approving authoriue ,owneFs, ancl contractor.
F.T.F.M.O.
THE CANNERY
NAIIIH
SEPTEMFER 2, 2OOS
111 QUIf.IGY $T FORT TAWN$END, IAIA
PQRT TSWN$ENB, WAFI.AR8
IHSTALI.ATIOII SO}IFOEIIIS TO ACCEFTED FLANS
E{IUIFI,IETIIT USED IS AFFROVEE
IF NO, E)TFI.AIH DEVA?ION
EII'ES F NEFlt$ !l Hc
IN$IRUCTEDIS TF LocvAfioH sF. coHTDL vALvE AND
CARE AHD I\IBIHTEI{AHCE OF TH*S HEW EqUttrfiIEFIT?
IFHA, EXPIAIN
YETi ETH(}
EEEltt
IHSTRUCTISHC
t. SYSTEfi,rcffillpftHEl.,lT$ F{sTRrCTloNs2. CAREAI{nMAl[[EHAt{cEIN$TEUCTTONS
ONTHE
YEsE
El YE$
NO
Fto
FREMFES;
SUFPLIF5 BUITDINGSLOC4TIOI{
OFSYSTEM
iNA,(E MOOEL YEAROF
litANUFASTURE ORIFICE SIZE QUA"IITITY TEI,FEFATURERATING
TYGO TYFRB PENDENT 20[7 Y"3fi 155
TYCO LFII CONGEALEB 2007 a//L 47 160
TYCO TYFRB UR ?007 %5 155
TYCO TYFRB HSW u007 Y"I 155
TYCO DS.1 DRY HS\[r 2007 1 2 'l Jtl
6FRll'lt(I-ERli
TYCO LFII HSI/\I 2fr07 YA 2 155
SCH.IO, ANEI CPVCFIPE AiID
FITIINGS
,A,ND CFVC
gF
BCt,GRfiOVEtr
AI.ARM DEVICE FIA)ffi{uM 11}'4E To OFERA.TE
THROUGI{ TEST EGHHECTIOiI
TYFE i,{Ar(E MODEL MIHUTES sEcstrtDs
FLOW FOTTER wsFR*2 $
ALAFITIVAL\fEOR
FLO}IIIHDICATOR
so0045tH)0{ Blna
AiJll ,r ,'l ,il{E$$EP-ill]-1flil8 003F
\
ERYV.qLVE OUICK OPENING DR'ICE
MAKE MSSEL EERI&LH.O.MAKE frTQEET SERIALlItr.
TSVIETOTRIF
THRIJ TEST
CONI{ECTION
WATER
FRESSURE AlRFRE+$UHE
TRIP POIhIT
AIR
FRESSURE
TIMEWATER
REACHEDTEST
OUTLET
AI.AF.IU OPSFATED
PROPERLY
MIN sEc F$t FSI PSt Mtht sEe YES t{o
WITHCUT
o_o_n_
WTTHooD
gRYPIPE
OFERANNGTEST
IF NO, EXFLAII{
*FEFATI{]N N FNEUTUANG EI ELECTRItr E FfYFFAULIC
PIFII.IG SUFERI/ISED E ves fl lilo DETECTIIIGMEDIASUPERVIEEO E YE,S I NO
FOE$ VALVE OPERATE FROM THE MAHTTAL TRIP AITIDIER RE{iIIOTE COI{TROL STA]IAHE? [ YES E $ts
rs rHERE Anr AccEsstELE fActt,* r"ffH*"rRcurr FoR rEsrrrrG?IF !I(}. EXFIAIITT
DOE$ EACH CIRCUTT ilPEEATE
SUPER\IIsIO}I LCSB ATAEM?
ggES EACH CIRCUTT OFERATE
VALVE RELEASE}
firlAxlll]lulil TIME TO APERATE
RELEASEMAI(E MODEL
YES Ng YEs HD YE NO
trELUGE&
FREACNOiI
VALI'E3
?EST
DES6RIFTIOI{
PNEUl|ltATlC: Erl*tlsh 4p Fsl (2.? barEl air FrE6Er:e snd messugq drpF ttvttlch shdll rlct *eed I }i
madsdtH dfuata5 CEIst€)aceES 150 pet (1o.2 t10{nt.Dr'furential sslvebar*)tFrlwo dry-prpe hG$hall IefidaFFelt oFBn
bE*rallledegiE *oFFeAptFins
prE!.ertdffmage.ahvsgmund
psl (tl-1 bars) ln 3zt ftours, Ts6t prBss{rrE
ATHER CORROSTVE CHEMICALS WERE NOT UEEB FgR TEsrHg SfSTEh{S $R
IFNO, STATEEEAEiOH30t!I HHS
EIYE$ ENq
BRINEORDERIVATIVES OF
ORY PPING FHEUMATIGALLY TESTEN
E{IUIPMEHT CFERATES FROFERLY
TESTS
uHDERGRouhrD rrtAtil$ AND'LEAI) tN c6nr,l fdGmim{-FIPIH€-
FLUSHED BY INSTALLER OF UIqDERGRCUFIEI SPRIHKL-ER flPING
rF N*, $(ppq16;
VERIF]ES AY CSPY SFTHE U FSR*II NO 8SB EYEE T]Hg
EtrYE$ tJile
ET.AFIKTESTil'IE
qASKETS
wEl.tllffG qq Y9U CEENFY THAT THE WEI.UIHG WAs PERFOR!,EB AYWELFERS AUALTFIEI} }I\ICOT'PLITNCE wtTH THE REQUIREMENT$ OFAT LEABTAWS D1,i,4 LF'EI Ai;'_
$UBigEF RE[ffiT1'EE
0
T}IATA
WELOEE PIFI$G EI YrS tr H* 1F YES, SSMFLETE SELSW
WITH THE EEQUIEEMET{T$ SFAT LERSTAWS s14s, LEIIELAR.3?
DO CERTIFYYOU WELUNGTHAT rS,RRlEAWAF tllO$t WTgHCSMFLIAI'ICE A gO*UMENTET}
GOI{TROLOUAUTY TdFROEEDUAE EN€URE T}I4T DISCSARE TFIATRETFIEVES,OFEI',Iltr6EPIFIFiGIHARESMOSTH,Af.,T}TTTAT$tAG trTHEH,WEtS'NG ARERE$}DUE ANDREMCI\JED.TF{AT
FLOWtrQESAt{J
YOU
YEE
TES
0 NA
EIYEs trNo
Elves [Ns
cuTcluTfi
Itrrscsl
FLT'WTEST
FUNCNO$AL
FTYERAUUCqATAI{ABE}T3?E
REHARKS
tF ilo. EtPtAtN
912€008
elzl2008
2,20fiS
Fox Fire Prevention, lnc-
DATE I..EFT
'II
SERVICE wrrt Att G0NTR0L vAj-l/E$ *PEN:
FOXFIPI'127M8
TESTSWT?{EESED EY
c-a,4-l*>+-ct*6
*€f#t t
l,lAnlE FLATE PROV|DEn ETYEE NHO
SI6NA?UEEA
a
800-999-5099
www.sllongtie.com
=g=E=1!E - <4=+E !
\
,\
Sil
\
)\
\
\
i
\r
T
+\
.t
r
i
')
\
\\
F
\.\
Thank y|u t,r y1ur partnership and supp|il as
we celebrute our golden anniversary.
City of Po- -- Public Works
Standard Detail
BLIND
FLANGE
45' BEND
22 t/2' BEND
.:.
TEE
PLUG
TEE
BLIND FLANGE
OR SMALLER SIZE PIPE
BLIND
FLANGE
90' BEND
GATE VALVE
o :!,
@
r 1 1/4' BEND
NOTES:
BEARING AREA OF CONCRETE THRUST_
BLOCK BASED ON 2OO PSI PRESSURE
AND SAFE SOIL-BEARING LOAD OF
2,OOO POUNDS PER SQUARE FOOT.
2. AREAS MUST BE ADJUSTED FOR OTHER
PIPE SIZES, PRESSURES, AND SOIL
CONDITIONS.
s. coNcRETE BLocKtNG (CLASS sooo)
SHALL BE CAST IN PLACE AND HAVEA MTNTMUM or t/+ seuARE Foor
BEARING AGAINST THE FITTING.
BLOCK SHALL BEAR AGAINST FITT]NGS
ONLY AND SHALL BE CLEAR OF JOINTS
TO PERMIT TAKING UP OR
DISMANTLING OF JOINT.
5. CONTRACTOR SHALL ]NSTALL BLOCKING
ADEQUATE TO WITHSTAND FULL TEST
PRESSURE UNDER ALL CONDITIONS OF
SERVICE.
6. MINIMUM ROD DIAMETER SHALL BEJ/4" ASTM A-Jo7 wtrH s6KSt YTELD
STRENGTH.
CROSS
4
TH RUST BLOCK TABLE
MIN. BEARING AREA AGAINST UNDISTURBED SOIL
SQUARE FEET
PIPE
SIZE
@
FT2
@
FT2 FT2
@
FT2
@
FT2
@
FT2
4 t,5 1 1 1 1 NONE
6t'4 4 2 1 1 NONE
8tt 7 6 4 2 1 4
lo"11 10 6 3 2 6
12"16 't4 9 5 3 9
14"22 19 12 6 3 12
16"29 25 16 8 4 16
18"36 51 20 10 5 20
20"45 39 24 13 6 24
22"54 47 29 15 8 29
24"64 56 35 18 9 35
28"87 76 48 24 12 48
30"101 a7 55 28 14 55
36"175 125 78 40 20 78
12"197 171 l07 55 27 107
48"257 223 140 71 36 140
Ool.No.Rrvhlon It ApvrDate AEi11997
I'1.,Horizontal Thrust'Blocks
apFqt/odBy:
Fitc E:\cog@staadadb&cr w-8Detail:
Page I of2
Scottie Foster
From: Scottie Foster
Sent: Friday, January 04, 2008 9:24 AM
To: 'Tom Aumock'
Gc: Alex Angud
Subject: RE: BLD07-207: Cannery fire sprinkler system
Super.
I will leave it to you and Alex if you want to set up a specific time with Sue at W
Fire.
Thanks
Scottie
From: Tom Aumock [mailto:taumock@cablespeed.com]
Sent: Friday, January 04, 2008 9:15 AM
To: Scottie Foster
Subject: BLDOT-207: Cannery fire sprinkler system
Good Morning!
Both Alex and myself.
I will pencil-in Tuesday afternoon for the inspection/test.
Alex will examine the installation for compliance with the City's Engineering
Design Stds., and I for the installation of the piping and pressure test. Alex or I
can provide the "approval for cover" thereafter.
Regards, Tom.
---- Original lr4essage -----
From: Scottie Foster
To: tau mocl<@cablespeed. qo]I]
Sent: Thursday, January 03, 2008 4:38 PM
U412008
a a
ReceiptNumber, ffi
BLD07-207
BLD07-207
BLD07-207
BLD07-207
BLD07-207
937600200
937600200
937600200
937600200
937600200
Plan Revlew Fee
Technology Fee for Bullding Permit
State Building Code CouncilFee
Building Permit Fee
Record Retention Fee for Building P
$172.41
$5,31
$4.50
$265.25
$10.00
Total
$22.41
$5.31
$4.50
$265.2s
$10.00
$0.00
$0.00
$0.00
$0.00
$0.00
$307.47
07-0881 1010412007 Plan Review Fee $150.00 BLD07-207
CHECK 33049 $ 307.47
Total $307.47
genprntrreceipts Fage 1 of 1
Dats $rbmin"a[@ od" cto""lf:::
teehnicalttCungtstsf****: tq*Actionffi
i lffil::r;$*H='-i. ,,,:J "i.:;',,,i;i,,Esrii:l:.J
$tatrrlAPlRo\rEDStsttrs nats 1wfift0s7
tr$stsr?
tsninglC-itr
Ilojectl{melc4$$ff,f
fi'+.is*usDaco Site AJ&sea
Parcal
Apll#
Tne
Paremt#
Date Approv"aW
Oveflidg Erfirs? f* Gorereent?f*
Dats Issuadl
nrpiratian Dato l04ff m008
BPT.RR
EF!',-15C9
Pns
STATE.CODS
150.00 $4f7.'
LL
3v
lq
c (*?**
'ro\ s"o?
c\ o#'vb0
f 7/a'-
/?s5
e
Development Seruices
Commercial Building Permit Application
) Applications accepted by mail must include a check for initial plan review fee of $150) See the "Commercial Building Permit Application Checklist" for details on
plan submittal requirements.
Property ner:
Name
Address lil
Phone:
Email:
250 Madison Street, Suite 3
Port Townsend WA 98368
Phone: 360-379-5095
Fax: 360-344-461 9
www.cityofpt.us
Lender lnformation:
Lender information must be provided for projects
over $5,000 in valuation per RCW 19.27.095.
Name:_
ProjectValuation: E C€ 5G{ "*
Construction Type:_
Occupancy Rati
Building Information (square feet):
1tt floor Restrooms
2nd floor _ Deck(s
3'd floor
-
Storage:-
Basement: ls it finished? Yes No
New fl Addition n Remodel/Repair tr
Change of Use !
I hereby certify that the information provided is correct, that I am either the owner or autho
and that all activities associated with this permit will be in accordance with State Laws and
Print Nam
Project Address & Zoning District:
il tt Q rtrntc^-y <{Legal Description (or Tax #)
Addition:
Block:_
Lot(s)
Office Use Onlv
Associated FermitsParcer# ,4 STt OAZOO
Project Description, Frrre iTrzsn,en* {_2. sra*,,._
City/SUZip: ?r aecUn PaO U-.lA .183 GG
Phone: 360 8? lq8 f
Co
Add
Email
Address:
State Licens e *:fu(c ?c-tZ*ttlSExp: (?-S f -o?
Business License #' QO /7
Contractor:
Email
Pho na'
City
City/SVZi
Total Lot Coverage (Building Footprint):
Square
lmpervious Su
Square
act
Townsend Municipal
C ITY (]F PORI T()WNSIND
DSD
Signature .HA|-*/oateol-76"07
)
Thomas L. Aumock
Consulting Fire Code Official
2303 Hendricks Street, Port Townsend, WA 98368
Office : (360) 385-3938 Email: taumock@cablespeed.com Cell : (360) 643-0272
TO:
FR:
DT:
RE:
CC:
AUTOMATIC SPRINI(LER PLAII REVIEW MEMORANDUM
Scottie Foster, DSD
Tom Aumock, Consulting Fire Code
16 December2007
BLD07-207: The Cannery Automatic Fire Sprinkler System, 111 Quincy Street
None
This consulting Fire Code Official is in receipt of the set of fire sprinkler plans for the above-referenoed
proposal from your office.
The following constitutes this department's findings and determinations based upon the sprinkler system
plans of record submitted by Fox Fire Prevention, wet-stamped 09126/07,by licensed Level III sprinkler
Adam Cole. [License expiration date of December3l,2007].
Findinss & Determinations:
1. The proposal was reviewed under NFPA 13, NFPA l3R, and the City of Port Townsend Engineering
Design Standards, and;
2. The automatic fire sprinkler system is found designed and certified by a licensed technician (W.A.C.
212-80); and,
3. The proposed new under-ground service lines is assumed to be "installed by others"and permitted as a
deferred submittal. Said underground fire service main shall be installed by at the least, a licensed "Level
IJ" contractor, currently licensed by the Washington State Fire Marshal, and;
4. The backflow prevention device shall be approved for installation by the City of Port Townsend
Department of Public Works, Water Division, prior to installation, and;
5. The proposed"4" x2-1"12" x2-I12" fire department connection shall be changed fo a four-inch [4-
inchl Storz F.D.C. and shall be fitted to a down-turn fitting of either Storz brand, or galvanized 45-degree
IP, and;
6. All underground thrust blocks shall meet or exceed City of Port Townsend Engineering Design
Standards INFPA 241 and shall be inspected by the City of Port Townsend Department of Public Works
or this department prior to cover, and;
7 . A complete set of as-built drawings [and digital disc if available] of the system plans shall be filed for
record with the City of Port Townsend and drawings on-site in a formal plans box in the riser room,
submiued on a24 x 36 inch maximum format, and;
8. The automatic sprinkler system shall be confidence tested in the presence of a Clty field inspector or
consulting Fire Code Official, and a formal "Contractor's Material & Test Certificate" shall be filed at the
completion of testing and approval prior to final building approval.
Any other applicable or relevant sections of said Code not covered herein shall nonetheless apply to this
proposal.
1.5 hours time was consumed in the review of this proposal.
It is the recommendation of this plans examiner that the proposal be approved subject to the aforesaid
stipulations.
Two [2] sets of approved plans, specifications, and flow data need to be returned to the permittee with a
City of Port Townsend stamped approval.
P
a
g
e
1
"
"
f
:
6
:
3
'
o
?
"
E
!
:
'
"
"
-
.
.
n
o
*
,
o
i
.
i
i
e
n
-
o
'
w
e
'
'
e
8
3
6
6
D
a
L
e
0
9
/
2
6
/
0
7
J
o
b
:
C
A
N
N
E
R
Y
P
R
O
J
E
C
T
I
N
F
O
R
M
A
T
I
O
N
J
O
b
;
B
"
*
,
.
I
B
*
R
T
T
,
,
O
*
O
/
,
-
y
'
o
"
"
u
p
u
n
c
y
-
-
A
u
t
h
o
r
i
t
y
h
a
v
i
n
g
J
u
r
i
s
d
i
c
t
t
o
t
,
-
y
/
u
o
s
e
-
-
2
5
0
'
o
g
P
r
n
o
u
t
s
i
d
e
O
R
D
I
N
A
R
Y
G
R
O
U
P
2
R
E
S
I
D
E
N
T
I
A
L
1
3
R
C
I
T
Y
O
F
P
O
R
T
T
O
T
^
I
N
S
E
N
D
H
o
s
e
^
^
n
^
^
<
i
R
e
s
i
d
r
r
a
l
g
4
3
6
2
'
0
g
P
m
/
t
_
t
.
u
v
O
N
S
U
M
M
A
R
Y
S
y
s
t
e
m
t
Y
P
e
-
-
r
'
y
*
-
?
'
_
_
'
_
:
P
-
P
-
I
Y
-
-
W
e
t
l
.
4
2
.
O
O
P
s
i
S
t
a
t
i
c
'
-
-
-
_
-
_
.
-
-
-
-
;
;
;
;
;
;
7
1
2
1
,
8
:
'
,
3
i
3
?
,
l
u
n
E
i
l
r
'
s
l
:
b
l
i
x
-
'
#
*
i
:
'
?
i
'
"
:
l
:
i
t
:
:
l
?
"
"
l
'
?
?
:
3
'
n
"
'
T
'
,
r
A
"
^
u
n
a
/
T
i
T
?
"
;
P
P
E
R
F
L
O
O
R
'
r
y
I
I
}
1
:
-
f
f
i
+
;
;
b
t
#
;
i
F
L
o
o
R
'
N
F
P
A
r
r
P
R
o
G
R
A
M
:
;
i
5
i
'
B
:
i
t
;
9
9
3
"
i
t
e
6
o
r
3
3
4
-
5
2
6
3
f
o
r
R
e
m
o
t
e
A
r
e
a
2
.
.
l
B
?
R
^
?
'
.
T
'
:
t
"
'
i
'
*
i
t
B
i
3
o
o
o
'
x
i
:
:
?
"
?
:
"
f
i
i
B
{
;
:
;
1
?
o
'
"
3
2
H
E
A
D
S
P
G
S
1
1
-
1
4
P
G
S
6
-
1
0
6
4
0
*
-
2
0
7
F
r
L
e
C
2
p
/
-
l
-
/
*
"
1
-
/
t
z
/
r
/
a
r
s
E
P
2
8
n
0
l
C
I
T
Y
O
F
P
t
)
I
i
T
T
(
J
V
{
N
S
E
N
D
D
S
t
)
V
N o E)
(E o-
15
0
14
0
13
0
12
0
11
0
10
0
Wa
t
e
r
Av
a
i
l
a
b
i
l
i
t
y
Cu
r
v
e
35
0
0
Fl
o
w
(G
P
M
)
90
-U)ue
o
o f a o o 87
0
60 50 40 30 20 10
50
0
10
0
0
15
0
0
I
St
a
t
i
c
=
14
2
ps
l
I
Re
s
i
d
u
a
l
=
20
ps
i
at
a
fl
o
w
of
4
3
6
2
gp
m
.
4500 5000
I
De
m
a
n
d
at BOR = 55.64 psi with 778.5 gpm flowing.
I
Sy
s
t
e
m
de
m
a
n
d
= 57 .21 psi with 1028.5 gpm flowing.
Pr
e
s
s
u
r
e
available = 133.58 psi when '1028.5 gpm is flowin
De
m
a
n
d
is
below curve by 76.37 psi (57.20Vo).
25
0
0
30
0
0
Page 3
Fox Fire Prevention
Description of Fitting abbreviations
Code Description
T
E
PT
PE
BKF
BV
GV
UE
UT1
Description of Other abbreviations
Code Description
Tee
Ninety degree elbowPlastic TeePlastic 90 degree Efbow
Backflow preventor
Butterfly val-ve
Gate valve
Underground ASCA ninety degree elbow
Underground ASCA tee: flow in run, ffow out bullhead only
AO
DR
BL
CM
PT
PE
PF
A
F
T
5
Arm-over
Drop
tsranch Line
Cross Main
Total- pressure
Pressure foss due Lo elevation changes
Pressure loss due to friction
Raised to the power of .5 (Square Root)
Actual- pipe J-engthFitting equivalent pipe length
Total- pipe length
CANNERY 09/26/07 1:01pm
Fox Fire Prevention
THE CANNERY
PORT TOWNSEND WA
Remote areas are selected by allowing specified nodes to flowfor the designated remote area. Nodes not specified will- haveno flow exiting those nodes within the designated remote area.
Page 4
tea
30-3
Remo
1
rea number 1 incl-udes nodes:8 46-50
rea number 2 includes nodes:9 39-45 47-50
Remote Area Summary
tea
1L-2
Remo
2
43
RA
Minimum SprinklerNode Fl-ow Press
30
18
Demand G SuppJ-yFlow Press
Avail-
Press
Below
Curve
1
2
13. 0 6. 95 303.2 43.87 147.1,2
14.8 7.15 1028. 5 57 .2I 133.58
Most demanding Remote Area is area number 2
97 .25
16.37
CANNERY 09/26/07 1:01pm Page 5
32LP8
321PT
32LE
32TT
322E, rT
32
32
32
JZ
32lT
32Lr
3228
32TT
JZ
32
32L'.r
32IE
32
32
32L'r
32IT
3Z
322PF,,1-PT
JZ
322P8, LPT
325PE
32
323PE
324PE | 1-PT
322PE
32
32
32
32
32
3278V
32LE,1T, 1BV
?)
32 lBKF
322uE,1cv,1uT1
Fox Fire Prevention
THE CANNERY
PORT TOWNSEND WA
Raw data previous to any calcufations
No. Code Diam Length Kfacl Kfac2 Press El-ev Hose HW Vel Fittings
1
2
3
4
11
1"2
13
L4
15
16
T7
18
I9
20
2L
aa
z5
24
25
26
t1
29
30
31
32
22
34
35
36
3'7
38
39
40
4I
42
43
44
45
46
47
48
49
50
DR1
DR2
DR3
DR4
AO1
BL1
BL1
BL1
BL1
BL1
BL2
BL2
BL2
BL2
BL3
BL3
BL3
BL4
BL4
BL4
BL4
BL5
BL1 1
BL 11
8L1"2
BLI2
CMAL
CMAL
CMAL
CMB
CMB
cMc
CMC
cMc
CMC
cMc
CME
RI1
Rr2
RI3
Rr3
UG
UG
-0.
-0.
-0.
-n
-1.
1.101
1.101
1.101
1.101
1.101
1.101
1.394
1.598
1.598
1.598
1.101
L.394
1.598
1.598
1.101
1.394
1.598
1.101
t.394
1.598
1.598
L.394
1.101
1.101
1.101
1.101
1.101
1.101
1.101
r.394
1.394
3. 352
3.352
3.352
3.352
? ?trt
3.352
4.352
1.639
4.352
6.351
6.155
6.155
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
.00
50
50
80
80
60
00
00
00
00
00
30
00
00
00
00
00
00
00
00
00
00
00
80
60
20
20
00
00
00
00
00
00
00
00
00
00
00
60
60
00
00
00
00
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
1s0
150
1s0
150
150
150
150
1"20
r20
L20
r20
]_20
]-20
120
120
]_20
]-20
140
140
0.
0.
0.
0.
L
o
8.
8.
8.
1.
5
1.
8.
G
8.
8.
6.
4.
8.
8.
6.
6.
8.
9.
10.
8.
r02.
11.
5
5
8
8
3
0
0
0
0
1
2
2
0
9
0
0
9
3
0
0
9
9
8
2
8
1
0
3
0
0
0
0
0
3
0
8
9
6
0
0
0
0
0
4.9
4.9
5.6
5.6
5.6
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
250.0
BL1
BL1
BL1
BL1
DT tr
CMC
CME
CMB
RI1
RI3
1
7
I6
16
7
0
0
0
0
0
7
0
0
0
0
0
0
7
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0.0
0.0
0.0
0.0
DR3
DR4
DR4
DR4
DR4
5.6
AO1
DR4
DR4
DR3
DR4
DR4
5.6
DR4
DR4
DR4
DR4
DR1
DR2
DR2
DR2
BL1 1
BL1.2
CMAL
0
0
0
0
0
2
-1
0
0
0
0
0
0
0
0
0
0
-1
_Z
-U
0
0
0
0
I2
0
0
0
0
0
0
3
3
1
4
0
0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
L4.
L2.
14.
13.
BL2
BL3
BL48.
5.
a
34.
?
A
1.
A
60.
0.
0.0
0.0
RI2
-6
CANNERY 09/26/07 1:01pm
0.8 PT9.6 PE
10.4 0.08391 PF
PT
16.00 3
-0.35
0.3976.04 L2
16.00
-0.35
0.87
16.52
Page 6
Notes
c:150
(EL: -0.80 fr)
Bl- Jct
c:150
(EL: -0.80 fr)
Bl Jct
Dia
( inch)
Fitting
and Dev
Fox Fire Preventlon
THE CANNERY
PORT TOWNSEND WA
Remote Area #2
Length Fr Loss(ft) (psi/ft)Pres s
(psi )
Hvd
Ref
Vel
(fps)
Pipe FlowNo (qpm)
Drop 3
A
F
1ET3
(1
10
22.4:5.60(16.00)^.5
22 - 4 1 . 10
PT
PE
08391 PF
PT
: 22.4/ (L6.04)^.5 : 5.59
2L
0.8
4.6 0
K-factor for drop 3at Hyd Ref Pts L2
7.55
? trtr
Drop 4
11
A
F
1TT
4
4
22.4:5.60(16.00)^.522.4 1 . 10
K-factor for dropat Hyd Ref Pts 13
4 :22.4/(16.52)^.5
14 15 16 19 20
13
.5123 25 26 27 29
c:150
(EL: -1.60 fr)
Bl Jct
-tr
22
Arm-over 1
14.8:5.6014.8 1.
A00)^.5 F2E1TT
4.3
17 t
2L.5 0.03906
PT
PE
PF
PT
7.00
-0.69
0.84
7.15
l-1
1B
4.99
K-factor for arm-over 1 : 14.B/ (1.15) ^.5 : 5.54
CANNERY 09/26/07 1:01pm
Hyd
Ref
I2
13
74
15
16
39
5 -- 23.96
18
Page 1
Notes
c:150
DR3
DR4
DR4
DR4
DR4
Cross main Jct
Pipe Ffow DiaNo (gprn) ( inch )
Fox Fi-re Prevention
THE CANNERY
PORT TOWNSEND WA
Remote Area #2
Length Fr Loss
( ft ) (psi/ft )
Fitting
and Dev
Branchline No. 1
T2
22.4:5.59(16.04)^.522.4 1 . 10
13
22.5:5.51(l_6.71)^.544.9 1.39
1"4
23.I:5.51- (17.48 ) ^.568.0 1. 60
15
23.6:5.51(18.34)^.59r.6 1. 60
24.5:5.51-(19.82)^.516 116.1 1. 60
OPTOPE0 0.08391 PFOPTOPE0 0.09638 PFOPTOPE
0 0.10660 PFOPTOPE0 0.18501 PF1PT7PE8 0.28701 PF
PT
A
F
T
A
F
T
A
F
T
A
F
T
A
F
1TT
8.
0.
8.
8.
0.
8.
o
0.
o
o
0.
o
1.
Pres s(psi )
Vel(fps)
? trtr
9 .44
10.87
14 .65
18.57
1"6 .0 4
0.00
0 .61
L6.7t
0.00
0.17
17.48
0.00
0.85
18.34
0.00
1.48
L9.82
0.00
3 .66
23.48
00
06
52
43
45
53
00
18
31
00
L7
48
K-factor for branchline no. 1 : 116.1,/ (23.48)^at Hyd Ref Pts 39 40 41 42
11.
12.
q
o
14.
11.
18.
Branchline No. 2 (Beginning pressure increased due to Hyd Ref Pt 1e)
(EL:
c:150
End head
2.30 fr)A
F
1TT
A
F
2ET
A
F
T
A
F
1TT
2
6
8
2
5
7
0
0
0
9
'7
6
1.
16.
0.
0.
L7.
0.
?
1.
q
L6.
8.
0.
8.
6.
PT 13.47 1-'7
20 .6:577 20 -6
60(13.47)^.5
1.10
PE 1.
0.07155 PF 1.PT 15.PE -0.0.08543 PF
PT
PE
0.09748 PF
PT
PE
0.17078 PF
5. 93
AO1(EL: -1.00 fr)
18
L9
20
a1 o-tr
42 .4
22.4:5
64.8
8.90
19
10.36
20
14.03
39
54(15.52)^.5
1.39
51(16.53)^.5
1.60
DR4
DR4
Cross main Jct
22"9:5.51(17.31)^.5
87 .1 1. 60
PT 20
K-factor for branchl-ine no. 2 : 87.7 / (20.48)^.5 : 19.38
CANNERY 09/26/0'7 1:01pm
7.55
9 .44
10.87
Hyd Ref Pt 25)otr aA
.00.68 7.51.53 25
.00.16 9 .40
29
4.7L
43
44
Page 8
Notes
c:150
DR3
DR4
DR4
Cross main Jct
c:150
End head
c:150
DR4
Cross mai-n Jct
Fox Fire Prevention
THE CANNERY
PORT TOWNSEND WA
Remote Area #2
Length Fr Loss
( ft ) (psi/ft )
Pipe Flow Dia
No (Spm) (inch)
22
Fitting
and Dev
Press
(psi )
Vel-(fps)Hvd
Ref
Branchl-ine No. 3
2t
22.4:5.59(16.04)^.522.4 1.10
A
F
T
A
F
T
A
F
1TT
8.
0.
a
8.
0.
o
6.
to
15
0
0
I6
0
0
4.3
3.88.1 0
8.0
0.08.0 0
8.0
0.08.0 0
6.9
]-7.7
18.6 0
OPTOPE0 0.08391 PFOPTOPE0 0.09638 PF9PT7PE6 0.10660 PF
PT
L6.04 2I
0.00
0 .6716.1L 22
0.00
0.11r1.48 23
0.00
'1 00
19.46 40
22.5:5.51(16.71)^.544-9 1.39
23
23.L:5.51(17.48)^.568.0 1. 60
22.3:5.60(15.85)^.524 22-3 1.10
22.4:5.51(16.53)^.525 44.1 1.39
22.9:5.51(17.29)^.526 61.6 1.60
23.5:5.51(18.14)^.521 91.1 1.60
K-factor for branchfine no.
Branchfine No. 5
A
F
1TT
DR4
PT 41.29 26 DR4PE 0.00
10558 PF 0.84 10.82PT 18.14 2"7 DR4PE 0.00
18322 PF 3.40 14.57PT 21".54 4I Cross main Jct
11.
18.
K-factor for branchfine no. 3 : 68.0/ (I9.46)^.5 : 15.41
Branchl-ine No. 4 (Beginning pressure increased due
A
F
1ET
A
F
T
A
F
T
A
F
1TT
PT
PE
08320 PF
PT
PE
09548 PF
PT 16.52PE 0.00
02659 PF 0.44PT 16.96
4 : 91,.L/ (27.54)^.5 : 19.63
29
22.4:5.51(16.52)^.522.4 1.39
6.9
OR
16.4 0
K-factor for branchl-ine no. 5:22.4/G6.96) ^.5 : 5
CANNERY 09/26/0'7 1:01pm
Cross main C
K:43.34:23.96+19.38
2I0.0:43.34 (23.48 ) ^.539 2r0.0 3.35
I(:39.31:23.96+15.41
I92.8:39 .37 (23. 97 ) ^ . 540 402.8 3.35
K:43.59:23.96+19.63
220 .I:43 .59 (25. 50 ) ^ . 54L 622.9 3.35
126.L:23.96 (21. 68 ) ^.542 1 49.0 3.35
29 .6:5 .44 (29. 53) ^ . 543 778.5 3.35
Cross main E
118.5:140. 63 (30. 65) ^. 544 178.5 3.35
23 .48
0.00
0 .49
23 .97
0.00
1.53
25 .50
0.00
2.L8
27.68
0.00
1.85
29.53
0.00
1.11
30.64
39
1 .63
40
1"4 .64
4I
22 .65
42
27 .23
43
28.30
44
Page 9
Notes
BL1 + BL3
BL1 + BL4
BL1
BL5
Cross main Jct
L:LZU
aM r-
Top of Riser
Pipe FlowNo (gpm)
Dia
(inch)
Fitting
and Dev
Fox Fire Prevention
THE CANNERY
PORT TOWNSEND WA
Remote Area #2
Length Fr Loss
( ft ) (psi/ft )
Press
(psi )
Hvd
Ref
Vel(fps)
A
F
T
A
F
T
A
F
T
A
F
T
A
F
T
720
2BL1+1A
9
090
0.
14.
13.
34
0
34
0
0
0
0
0
0
3
0
3
0
0
0
8
0
8
0
0
03520
IIl 43
0.26307
0.36996
39'1430
BLrL
PE
PF
PT
PE
PF
PT
PE
PF
PT
PE
PF
PT
PE
PF
PT
0.
13.
8.
0.
8.
q
0.
5.
a
0.
a
K-factor for Cross main C : 178.5/ (30.64)^.5 : 140.63
A
F
T
PT 30.65 44PE 0.00
397 43 PT 13.87 28.30PT 44 -52 45
K-factor for Cross main E : '7'78.5/ (44.52) ^.5 : 116.68
CANNERY 09/26/07 1:0]-pm
Press
(psi )
Ve1
(fps )
Page l-0
Notes
Pipe FlowNo (gpm)
Riser 1
Dia
( inch )
Fitting
and Dev
Fox Fire Prevention
THE CANNERY
PORT TOWNSEND WA
Remote Area #2
Length Fr Loss(ft ) (psi/ft )
PT
PE
11145 PF
PT
PE
01761 PF
PT
PT
PE
0.01549 PF
PT
PE
0.00000 PF
PT
PT 44.52 45PE 1.56
0 . 1114 5 PF 1, .22PT 41 .29 4'7
C:I2O
CME(EL: 3.60 fr)
16.19
B.O.R
C:12O
RI1(EL: 1.00 ft)
L6 -19
(EL: 4.00 fr)
7.87 1BKF : 6.00#
B. O. R.
C:I4O
B. O. R.
8.39
11.09
Supply Jct
Hyd
Ref
45 '718 .5 4 . 35
A
F
1BV T
3.6
7.3
10.9
K-factor for Riser I : '718
Riser 3
41
K:113 .2I:1I3.21+0.0
5:113 .2L(41 .29) ^ .55 4.35
5 / ( 41 .29) ^ .5 : L1,3 .2r
178
118
OA
T
T
A
F
TBKF
A
F
T
A
F
T
41 .29
0.43
0.11
41.83
L .13
6-O'7
1.0
0.01.0 0
4.0
0.04.0 0
60.0
41.3
101.3
0.0
0.0
0.0
4'7
48
55. 64 49
48 't'78.5 6.36 1
Under ground
49 "r18.5 6.1,6
55. 64 49
0.00
1.57
5'7 .21" 5 0
0.00
0.00
57 .21 5 t-
2UE 1GV
1UT1
250.0 gpm : Hose
50 1028.5 6.76
Availabfe flow at 5'7.2I psi- is 3583.2 qpm which is 2554.7 gpm from curve
Supply pressure available with 1028.5 gpm flowing is 133.58 psi,
thus systern requi-rement is 76.37 psi below supply curve. (51.22)
CANNERY 09/26/0"7 1:09pm Page 11
Notes
c:150
(EL: -0.50 ft)
Bl Jct
c:150
(EL: -0.50 fr)
Bl- Jct
Dia
( inch )
Fitting
and Dev
Fox Fire Prevention
THE CANNERY
PORT TOWNSEND V'iA
Remote Area #1
Length Fr Loss
( ft ) (psi/ft )
Press
(psi )
Hvd
Ref
Vel-(fps)Pipe Fl-owNo (Spm)
Drop 1
Drop 2
7.00
-0.22
0. 17
6. 95
7.00
-0.22
0.17
6. 95
4 .37
4.37
13 . 0:4 . 90 ( 7 . 00 ) ^. 513.0 1.10 t_
PT
PE
0.03051 PF
PT
PT
PE
0.03051 PF
PT
A
F
PET
0.5
trn
trtr
0.5
trn
5.5
1
l-
K-factor for drop 1 : 13 .0/ (6.95) ^.5 : 4.93
30
31
A
F
1PT T
2
2
13.0:4.90(7.00)^.513.0 1.10
K-factor for drop 2at Hyd Ref Pts 31
:13.0/(6.95)^.5:4.93
32 33
CANNERY 09/26/01 1:09pm
Pipe FlowNo (gpm)
Dia
( inch )
Fox Fire Prevention
THE CANNERY
PORT TOWNSEND WA
Remote Area #1
Fitting Length Fr Loss Press Hyd Vel
and Dev (ft) (psi/ft) (psi) Ref (fps)
(Beginning pressure increased due to Hyd Ref Pt
30
Page 12
Notes
31) C : 150
DR1(EL: -1.80 fr)
4.s3
J.l-DR2(EL: -0.60 fr)
B -92
35 Cross main Jct
33) C : 150
DR2
(EL-- -2.20 flL)
DR2(EL: -0.20 ft)
Cross main Jct
30
Branchl-ine No. 11
13.5:4.93 (7.45) ^.513.5 1.10
2T
13. 0:4 . 93 ( e. 96) ^. 526.5 1.10 2PE 1PT
13.6:4.93(7.55)^.513.6 1. 10
33
8.8
0.0
8.8o,)
15. 0
24.2
A
F
T
A
F
T
0.03269
0.11-420
PT
PE
PF
PT
PE
PF
PT
PT
PE
PF
PT
PE
PF
PT
03309
1 .45
-0.78
0.29
6.96
-0.26
2.7 6
9 .46
7.
0.
6.
2.
q
36
95
09
1.)
59
K-factor for branchllne no. II : 26.5/ (9.46)^.5 : 8.62
Branchf ine No. 1,2 (Beginning ressure increased due to Hyd Ref Pt55 32
951a 4 .56
33t_3.0:4.93(6.95)^.526.6 1.10 2PE 1PT 0.11488 8.95
36
59
0
p
A
F
T
A
F
T
10.8
0.0
10.8
ot
15.0
23.7
K-factor for branchfine no. 12 : 26.6/ (9.59)^.5 : 8
t
f
CANNERY 09/26/01 1:09pm
Dia Fitting(inch) and Dev
Fox Fire Prevention
THE CANNERY
PORT TOWNSEND WA
Remote Area #1
Length Fr Loss(ft) (psi/ft)Pipe FlowNo (gpm)
35
Cross main B
1a
53.2:13 .44 (I5.67 ) ^.553.2 1.39 4PE 1PT
32.0
30. 0
62 .0
1"2 .0
12.O
24.0
1"5 .67
0.00
8.17
23.83
tr an
3.1-5
32.19
Page 1-3
Notes
:150
Point
8L1"2
Loop Jct
C:150Split Point
Loop Jct
0.00)
c:150
Loop Jct
(EL-- L2.00 fr)
Top of Riser
Press
(psi )
Hyd
Ref
Vel
(fps)
Cl-ockwise (K-Factor G split:8.62 from BL11)Lirsp1
26.1:8.59 (9.66)^.5
36.5 1.10
3PTOPE3 0.01812 PFOPTOPE0 0.20693 PF
PT
A
F
T
n
F
T
A
F
T
A
F
T
11.
0.
11.
14.
15.
29.
.46 35
.00.20 3.30.66 36
.00.00 12.30.66 3'7
9
0
0
9
0
6
15
9.46
0.00
6.20
15.66
9. B 1.10
36 3PE
:::::::::Yl=:: (K-Factor
'o"ntt;:-3 '52 rrom Bf"'F 25.0 PE34 1,6.1 1.10 5PE T 121 .0 0.04884 PF
PT
35
31
37
38
46
(Balance Accuracy : 15.66 - 15.66 :
5.63
11.18
11.1838 53.2 1.39
0.13175
0.13175PE2
PT
PE
PF
PT
PE
PF
PT
K-factor for Cross main B : 53.2/ (32.19)^.5 : 9.38
,)
CANNERY 09/26/01 1:09pm
A 4.0 PTF 17.5 PET 21".5 0.09049 PF
PT
53.2/ (35.69)^.5:8.90
A ]..0 PTF O.O PET 1.0 0.00078 PFA 4.0 PTF O.O PET 4.0 0.00012 PF
PT
8.09
1.15
(EL: 40.54 1BKF :
0.57
Page 1"4
Notes
C:I2O
CMB(EL: 3.60 fr)
B. O. R.
c:720
RT1(EL: 1.00 fr)
Pipe FlowNo (gpm)
Dia
( inch )
Fitting
and Dev
Fox Fire Prevention
THE CANNERY
PORT TOWNSEND WA
Remote Area #1
Length Fr Loss(ft) (psi/ft)Press
(psi )
Hyd
Ref
Ve1(fps)
=::::346 53.2 I.64 lE 1T
1BV
K-factor for Riser 2 :
Riser 3
53.2:8. 90 (35. 69) ^.54't 53.2 4.35
48 53.2 6.36 1BKF
Under qround
49 53.2 6.1,6 2UE 1cV
1UT 1
250"0 gpm : Hose50 303 .2 6 "L6
32.1"9
1.56
1 9I
35.69
46
47
35. 69 47
0.43
0.0036.12 48
1.73
6. 0043.86 49
00
A
B.O
fr)
00#
.R.
C : 140
B. O. R.A
F
T
A
F
T
60.0
4r.3
101.3
0.0
0.0
0.0
PT
PE
PF
PT
PE
PF
PT
43.86 49
0.00
0.010.00011
0.00000
43 .87
0.00
0.00
43 - B'7
50
51 Supply Jct
Avail-abl-e flow at 43.8'7 psi is 3811 .7 gpm which ls 3574.5 gpm from curve.
Supply pressure avaifabl-e with 303.2 gpm flowing is 141-.1,2 psi,
thus system requirement is 97.25 psi befow supply curve. (68.9%)
CITY OF PORT TOWNSEND, WASHINGTON
Community Development Department
250 Madison Street, Port Townsendo Washington 98368
SPRINKLER PLAN REVIEW _ NFPA 13 SYSTEM
l/
Hazard classification(s) [Refer to page 4] shall be on the plans.
Density and area of sprinkler operation shall be on the plans.
Allowable area/coverage per sprinkler head shall be on the plans.
Dry System Designs:
Dry pipe valve(s) - Including MFG and listing.
Compressor size - Including MFG listing
Anti-Freeze Designs:
Amount and manufacturer of solution to be indicated on plans.
Check valve to prevent contamination.
Filler cup location.
Density For Hieh-Piled Storase:
Commodity classification shall be on the plans.
Rack or pallet storage.
In-rack sprinklers required.
Hose stations provided.
Smoke vent ration shown on the plans.
Draft curtains - Square feet shown on the plans.
(
Date Received:Plan Checker: T 4uUa&
File Index Number: 6cO A 7 - 20 F Date Checked: tA ,€c 2u/
Approved: Approved With Revisions:Revision Required:
Project Location: ttt Quqcl Jfi Business: n/f C,frtel
Contractor: fry 4 tc Pac-Yarfzta/Contractor Phone Number: tl!:_EZ!_, /2!E*
uepntET?-nLd
Hazard Classification: <.7 /orZo ,Density/Area of Protection:*t0tot OrZ/ltWd
Allowable Coverage
Per Sprinkler Head:
surGui zfbel
hlt(,' ,,fa d Hieh Piled ,Sto'rage: x/+f;rn' ,'/*
€c)Ltcto,
r',
C'od
oz
o0
o
F
V
o I. DESTGN CRTTFRTA
Washington State Patrol Fire Protection Bureau Sprinkler Checklist Page I of5
rc(l)
qo&
q
c)&
oz
9pev
{
t/
V
II. WATER SUPPLY INFORMATION
Minimum supply provided.
Connectiontowatersupply. "/Lt'"*t*t /n aO'tlecs 4$o7"e/'
.@;urAotPIV location(s) are acceptable (within 50' of a public fire hydrant)
PIV sectional location(s) are a maximum of 5 devices.
Hydrant Test Information On Plans:
Location and elevation ofstatic and residual pressure.
Flow location from property to be protected.
Static pressure indicated on the plans.
GPM indicated on the plans.
Date and Time of testing is indicated on the plans. Pa. C*rv k"oan'
Test conducted bylwho supplied supply information indicated on plans. C tty
This project requires super hydrants (6x2-2 /z"xl-4").
Pipe material type and MFG indicated/provided.
Valves data include model number and listing.
Hydrant location(s) and/or pipe size and depth ofbury indicated.
Thrust blocking.
Supply NFPA notes on plan.
Joining method used.
Pipine:
Material and size - including wall thickness.
Hangers - including the listing and proper location.
Earthquake bracing - including materials, size, and proper location.
Drainage:
Main drain.
Inspectors test outlet (MRA).
Auxiliary drains in basements and pitched ceilings.
New on-site pipe diameter(s) and piping materials per NFPA 24. )erU..'."l ,f/lr'-At'
System use limited to 90 o/o of available water supply
ct0)&
oz
'o(D
36(D&
bo
EM
rrr. WATER supply uNpERGRouNp DESIGN
I
t
"ttc)
cro&
citl)
oz
hn
L
IV. OVERHEAD SYSTEM COMPIONENTS
g
o
@
Washington State Patrol Fire Protection Bureau Sprinkler Checklist Page2 of 5
'oo)
cto)&
Cirl)&
oz
bI)
o
F *o
an
V
Snrinklers:
Manufacturer specification sheet, model, and listing.
Number of sprinklers.
Temperature rating.
Proper spacing on each branch line.
Alarms provided.
Alarms monitored by a central station. Tt 6 e^rt fe"!
-Y-
p.l ?ctrY StDc't)FF4 ct+t 'Construction Plans. etc.:
Complete construction details (full height and cross section)
Room dimensions and label rooms use/purpose.
Building elevation.
Roof design (smooth ceiling, beams, girders, bar joists).
Hydraulic Calculations:
Summary sheet of Hazard Classification(s)/Density (Refer to page 4).
Detailed work sheets.
Graph sheet.
Abbreviations and symbols.
Peaking of grid systems.
Most remote area (MRA).
Hydraulic reference points.
Additions And/Or Remodels:
Details of existing sprinkler system.
Calculations for additions to system.
Threaded lightweight steel of less than 3" diameter at no more than 12 1""r. ,/uA //tE-/-r'
Steel pipe of less than I Yz" diameter at no more than 12 feet.
Steel pipe more than I /'" diameter at no more than 15 feet.
Copper tube of3/q" to 1" at no more than 8 feet.
Copper tube of \ Vq" to I Yz" at no more than 10 feet.
zEB
zVG
aZ
r'
!o
d)
qr
o,)e,
d.c)&
oz
ooco
F *o
Washington State Patrol Fire Protection Bureau Sprinkler Checklist Page 3 of 5
'oc)L
5o)&
cr0)&
oz
00tro
>M
o
VdV
Seismic bracing calculation sheet.
Assigned load calculations shall be indicated on plans. Frrl C*t /
Longitudinal: 80' maximum for feed and cross mains.
Laterar: Pil vpp* l3' It A
40' maximum for feed and cross-mains.
Within 24" of every other with flex coupling on the mains.
If primary structural members exceed 40', then spaced up to 50'.
Last length of feed and cross-mains.
Required on branch lines 2 1/2" andlarger.
May not be omitted on pipes with rods less than 6".
Longitudinal and lateral at top of risers (4 way).
Hazard Classification:
LightHazard
Quantity or combustibility of contents is low. Fires have a relatively
low heat release rate.
Ordinary Hazard" Group I
Combustibility of contents is low. Quantity of combustibles is
moderate. Stockpiles are less than 8 feet in height. Fires have a
moderate heat release rate.
Ordinary Hazard. Group 2
Combustibility of contents is moderate. Quantity of combustibles is
moderate. Stockpiles are less than 12 feet in height. Fires have a
moderate heat release rate.
Ordinary Hazard. Group 3
Quantity or combustibility is high. Fires have a high rate of heat
release. Storage is limited to 12 feet in height.
Extra Hazard. Groups I & 2
Quantity and combustibility is very high. Flammable liquids, dusts,
and/or other materials are present that result in rapidly developing
fires with high heat release rates.
Undetermined
When buildings have an undetermined use, Ordinary Hazard, Group
3 design standards are the minimum that are acceptable.
a
E
13
C)h
(t
c>&
cr(,)&
o7
ooco
B
M
L
Washington State Patrol Fire Protection Bureau Sprinkler Checklist Page 4 of5
ADDITIONAL REOUIREMENTS
F, D, c, To 0c- 4r atnn? FLa,tfi al OopuntraN Ptotvl,
?H, Pl+*,t |ltQatctuvtTt Pglnef "
t/,G,Aturroez P tt d"Ofu oAurr&./er"orn,ht
Washington State Patrol Fire Protection Bureau Sprinkler Checklist Page 5 of 5
FOX FIRE PREVENTION, ruP.
P.O. BOX 594
PORT ORCHARD, WA 98366.0594
CONTRACTORS REGISTRATION #FOXFIPI127M8
(206)
(360)
;*- -,P.*)T-..^t*r*-J
bp TRANSRnmTAL
oo-t t'L6'a 'o"^oO? -qSa
ATTENTION
RE:.+*a c lrJdfu2,\^r
623-2993
871.1985
TO yr
WE ARE SENDING YoU d
El Shop drawings
n Copy of letter
Attached [l Under separate cover via the following items:
n Prints n Plans tr Samples tr Specifications
E Change order
COPIES DATE NO.DESCRIPTION
q,'AG'7 t ,a.e.7,^,L(n, r'r;t> %^
3 Tu"-a l- l'I,/ar'lr;- Ae,;
3 l-'/fft-( ,"r-/ #"*'fr-
t I F.*^-Y ,1u.
THESE ARE TRANSMITTED as checked below:
fi ror approval
! For your use
tr As requested
n For review and comment
N FOR BIDS DUE
tr Approved as submitted
tl Approved as noted
n Returned for corrections
tr Resubmit
-
copies for approval
tr Submit copies for distribution
IF Return / ,orrected prints
tr PRINTS RETURNED AFTER LOAN TO US
REMARKS
li1llt
l\l ^F6 oBrnol UJ
NSENDi0v{RTPO0t
SIGNE
COPY TO
lf enclosures are not as noted, kindly notify us at once.
)a
Receipt Number:
BLD0T-207 937600200 Plan Review Fee $491.24
Total
_q1!_0.00
$150-00
s341.24
HECKc 32503 $ 150.00
$150.00Total
genpn{rreceipts Fage 1 of 1
(rnith OS&Y gates) (with BGVIC valves)
FEAf,URES
Sizes: fl21/2' fl 3' E 4" [ 6" D 8" D 10"
Maximum working water pressure 175 PSI
Maximum working water temperature 14OF
Hydrostatic tesl pressure 350 PSI
End connections (Grooved for steel pipe) AWWA C606(Flanged) ANS|816.1
O'T.ONS Class 125
(Suffixes can be combined)
tr - with flanged end OS & Y gate valves (standard)
tr L - lessshut-offvalves(groovedbodyconnections)
tr LM - less water meler
tl - with remote reading meter
tr - with gpm meter (standard)
n - with cu fVmin meter
tl G - withgroovedendOS&Ygatevalves
I FG - with flanged inlet gate connection and grooved
outlet gate connection
B Pl - with PostlndicatorGateValves (4"-10")
flBGV|C - with grooved end buitedlyvalves
ACCESSORIEStr Repair kit (rubber only)
I Thermal expansion tank (ModelWXTP)
tr OS &Y Gate valve tamper switch (OSY-40)
I TestCockLock(ModelTCL24)
F/LE OPY - lco o -2"7
tr\F*"bv* /.*\.uy*EF\ F"-ll*$d*=htu g {-\,& e{Zh #A*Y*-Y&A {:&Jffiffi3*mf*'#L--rlYg\"r&4$ i'LJfi%"{ "ffiT#ffi#\f#& # E&&L* #trTH:ffi {
APPLICATION
Designed for installation on potable water connections in
fire sprinkler systems to protect against both backsipho-
nage and backpressure of polluted water into the potable
water supply. Model 350ADA shall provide protection where
a potential health hazard does not exist. lncorporates me-
tered by-pass to detect leaks and unauthorized water use.
STANDARDS COMPLIANCE ( 4'- 8" Horz. &Vertical)
. ASSE@ Listed 1048
. AWWACompliant C510 (with gates only)
. CSA@Certified
. /UL@Classified (2112.-10")
. V C-ut@ Classified (2112"-10')
. FM@Approved
. Approved by the Foundation for Cross Connection
Control and Hydraulic Research at the University of
Southern California (2 1 12"-10' except 1 0' BGVIC)
MATERIALS
Main valve body Ductile lron ASTM A 536 Grade 4
Access covers Ductile lron ASTM A 536 Grade 4
Coatings FDAApproved electrostatic epoxylinish
lnternals Stainless steel, 300 Series
NORYLTM, NSF Listed
Fasteners & springs Stainless Steel, 300 Series
Elastomers EPDM (FDAapproved)
Buna Nitrile (FDA approved)
Polymers NORYLTM, NSF Listed
MODEL 35OADA
with OS&Y option
DIMENSIONS &WEIGHTS do not include )
MODEL 350ADA with
BGVIG option
MOTE
35OADA
szE
in. lm
OMENSION (approx'mte)
in. lm
A WIH
BUTTEFFLY
VALVES
n.l*
B LESS GAIE
VALVES
tn,l*tn.l*
D
in. lm
E
OS&Y OFEN
in. lm
E
OS&Y
CLOSED
in. lm
EWNH
BUTTEFFLY
VALVES
tn,l*
F
in. I mm in. lm
2112 65 35 1/8 892 l2 1/81 816 20 1lB 5'11 4 112 114 229 't6 3/81 416 1371A1352 I 203 152 7114 184
3 80 36 1/8 918 nslal 88 201t8 511 4 1t2 114 I 229 la7tal 479 15 5/81 397 8 203 6 7 1t4 184
4 100 38 965 331t81 U2 1971A 505 4 112 114 I 225 223141 578 18 1l4l 464 9 1/8 232 o 152 8
6 '150 47 1 194 39 7/81 1013 257t8 657 5 1t2 140 10 1t2 267 30 1/81 76s 23 3/41 603 10 1/8 257 7 178 10 2g
8 200 61 5/8 1565 54 1l2l 13A4 38 112 978 10 254 12 30s 373/41 9s9 zg 1t4l74g t'l 15/16 303 a 1t2 216 11 279
10 250 64 s/8 1642 54 1t2l 1344 3A 12 978 '10 254 12 305 4s3t4l 1162 35 3/81 899 13 5/16 338 s 112 216 12 305
Attention: Model 350ADA
(grooved body) and Model 350DA
(flange body) have different lay
lengths.
WTL'(ll\ls Model 350ADA
Double Check Detector Assemblya @ c.mpany
il
DWEIGHT
wflft
BUTTERFLY
VALVES
(GXG)
tos I toin. I mm
MODEL
35OADA
SIZE
tus. I kq
WTTHOUT
GATES
WIIH OS&Y
GATES (GxF)
Ibs. I ks
WITH OS&Y
GAIES (GXG)
tbs. I kq
21t2 65 105 47.5 207 94 199 90.3 ffi.2
80 104 47 224 101.5 214 97 124.4 56.5
4 10o 91 41.3 245 111 2't9 99.4 123 55.8
o 150 141 il 377 171 158
8 200 302 137 774 754 u2.3 410 ,@
355 161 't040 472.7 918 416.5 527 239.3
Page 1 ot 2
FLOW CHARACTERISTICS
MODEL 350ADA 2112",3" & 4" (STANDARD & METRTC)
FLoW RATES (/s)
12.6 25.2 37.9
200 400 600
FLOW RATES (GPM)
MODEL 350ADA 6u, 8u & 1o"(STANDARD & METRTC)
FLoW RATES (lis)
63.1 126.2 189.3
1000 2000
FLOW RATES (GPM)
O Rated Flow (Established by approval agencies)
3000
50.5
(do5aaoJ
1ll
E,laa
uJ(rrr
69
35
0
15
10
5
0
goo-
U'ooJ
ulEDotnulEo.800
252.4
(!o:
oaoJt!Ef
U)
U)tu
E.(!
104
69
35
0
15
10
5
0
ooo-
oooJ
UTEfott
lr.tEo-
104
4000
TYPICAL INSTALLATION
Local codes shall govern installation requirements. Unless
otherwise specified, the assembly shall be mounted at a
minimum of 12" (305mm)and a maximum of 30" (762mm)
above adequate drains with sufficient side clearance for
testing and maintenance. The installation shallbe made so
that no part of the unit can be submerged.
SPEC
The Doub Detecto
,Tlt
=9
ozotroUc
PROTECTIVE
1":"Y'_\-
MIN,
MAX.301'
*,2t"-Vr" I
"\11
DTRECT|oN oF FLow +
(VERTICAL INSTALLATION) MODEL 3sOADA (OUTDOOR INSTALLATION)
r Backflow Prevention Assembly shall be ASSE@ Listed 1048, and supplied with full port gate
valves. The main bodyand accesscovershallbe epoxycoated ductile iron (ASTM A536 Grade4), the seat ring and check
valve shall be NorylrM (NSF Listed), the stem shall be stainless steel (ASTM A276) and the seat disc elastomers shall
be EPDM. The first and second check valves shall be accessible for maintenance without removing the device from the
line. The Double Check Detector Backllow Prevention Assembly shall be a WILKINS Model 350ADA.
Page 2 ol 2
21/2',(100mm)
(80mm)
8',-10" (250mmf
Capacity thru Schedule 40 Pipe (GPM)
Pipe size 5 ft/sec 7.5 ft/sec 10 ft/sec 15 ft/sec
21t2"75 112 149 224
3 115 173 230 346
4 198 298 397 595
6"450 67s 900 1 351
8"780 1 169 1 559 2339
10"1229 1843 2458 3687
12"1763 2644 3525 5288
WILKINS a Zurn company,1747 Commerce Way, Paso Robles, CA 93446 Phone:805/238-7'100 Fax:805/238-5766
lN CANADA: ZURN INDUSTRIES LIMITED,3544 Nashua Dr,, Mississauga, Ontario L4V 112 Phone:905/405-8272Fax:9O5/405-1292
Product Support Help Line: 1-8rZ-BACKFLOW (1-817-222-5356) o Website: http://www.zurn.com
tqca Fire & Building
Products
Technical Services: Tel; (800) 381-9312 / Fax: (800) 791-5500
Ser-es DS-t - 5.6 K.factor
Dry [tpe Sprinklers
Quick Bespons€r Standard Coverage
General
Description
The Series DS-1 , 5.6 K-factor, Quick
Response, Standard Coverage, Dry
Type Sprinklers are decorative 3 mm
glass bulb automatic sprinklers de-
signed for the following typical uses:
. where pendent sprinklers are re-
quired on dry pipe systems that
are exposed to freezing tempera-
tures (e.9. sprinkler drops from un-
heated portions ol buildings)
. where sprinklers and/or a portion
of the connecting piping may be
exposed to freezing temperatures
(e.9. sprinkler drops from wet sys-
tems into freezers, sprinkler
sprigs lrom wet systems into un-
heated attics, or horizontal piping
extensions through a wall to pro-
tect an unheated area of a build-
ing)
. where sprinklers are used on sys-
tems that are seasonably drained
to avoid freezing (e.9. vacation re-
sort areas)
WARNINGS
The Series DS-l Dry Type Sprinklers
described herein must be installed and
maintained in compliance with this
document, as well as with the applica-
ble standards of the National Fire Pro-
tection Association, in addition to the
IMPORTANT
Always refer ta Technical Data
Sheet TFP700 for the "INSTALLER
WARNING" that provides cautions
with respect to handling and instal-
lation of sprinkler systems and com-
ponents. lmproper handling and in-
stallation can permanently damage
a sprinkler system or its compo-
nents and cause the sprinkler to fail
to operate in a fire situation or cause
it to aperate prematurely.
standards of any other authorities hav-
ing jurisdiction. Failure to do so may
impair the pertormance of these de-
vtces.
The owner is responsible for maintain-
ing their fire pratection system and de-
vices in proper operating condition.
The installing contractor or sprinkler
manufacturer should be contacted
with any questions.
The Series DS-l Dry Type Sprinklers
must only be installed in fittings that
meet the requirements of the Design
Criteria section.
ModeUSprinkler
Identification
Numbers
TY323s -
TY3135 -
TY3335 -
(Pendent)
(Upright)
(Horizontal Sidewall)
Technical
Data
Approvals /
UL and C-UL Listed. ry'
FM and NYC Approved.l
(Refer to Table A)
Maximu m Working Pressure
175 psi (12,1 bar)
lnlet Thread Connection
1 inch NPT (Standard Orde|
rso 7-H1
Discharge Coefficient
K = 5.6 GPM/psit/e
(80,6 LPM/bartrz)
Temperature Ratings
Refer to Table A
Finishes
Sprinkler: Natural Brass, Chrome
Plated, White Polyester
Escutcheon: White Coated or Ghrome
Plated
Physical Characteristics
lnlet . . CopperPlug CopperYoke . Stainless SteelCasing Galvanized Carbon Steel
lnsert . Bronze
Bulb Seat . Stainless SteelBulb Glass
Compression Screw . BronzeDellector BronzeFrame Bronze
Guide Tube . Stainless SteelWaterTube . Stainless SteelSpring . Stainless Steel
Sealing Assembly
. Beryllium Nickel MTeflon*Escutcheon Carbon Steel*Registered Trademark ol DuPont
Patents
U.S.A. Patent No. 5,188,185
,,%
a 1&
Page t of 8 APR|L, 2OO4 TFPSIO
Page 2ol8 TFPs{O
SPRINKLER FINISH
TY3235 Pendent
w/ Standard
Recessed Escutcheon
(Ret. Fig.3)
MWide Flange
Recessed Escutcheon
(Ref. Fig.4)
TY3235 Pendent
w/ Std, Escutcheon
(Ref. Fig. s)
w/ Deep Escutcheon
(Ref. Fig.6)
w/o Escutcheon
(Rel. Fig.7)
TY3135 Upright
Mo Escutcheon
(Rel. Fig.8)
TY3335 Hor. Sidewall
with top ol
Dellector-to-Ceiling
distance ot
4 to 12 inches
(100 to 300 mm)
w/ Std. Escutcheon
(Ref. Fig.9)
w/ Deep Escutcheon
(Rel. Fig.10)
rl1//o Escutcheon
(Rel. Fis.11)
Temperature
Rating
Bulb
Color Code
Natural
Brass
Chrome
Plated
White
Polyester
Natural
Brass
Chrome
Plated
White
Polyester
Natural
Brass
Chrome
Plated
White
Polyester
135"F/57'C Orange 1,2,3,4 1,2,4 1,2,3, 4 1,2, 4 1., 2., 3*, 4 1.,2-,4
1 55'F/68'C Red 1,2,3,4 1,2,4 1,2,3,4 1,2,4 1.,2.,3..,4 1-,2-, 4
175"Fnq"C Yellow 't,2,3, 4 1,2,4 1,2,3,4 1,2,4 1.,2.,3.-,4 1".2*.4
200'F/93'C Green 1,2,3,4 't,2,4 1,2,3,4 1,2, 4 1.,2.,3*,4 1-,2-,4
286'F/141"C Blue N/A 1,2,3, 4 1,2,4 1',,2.,3..,4 't-, 2. , 4
Notes:
1. Listed by Underwriters Laboratories, lnc (Maximum order length of 48 inches).
2. Listed by Underwriters Laboratories for use in Canada. (Maximum order length of 48 inches)
3. Approved by Factory Mulual Research Corporation (Maximum order length of 48 inches)
4. Approved by the City of New York under MEA 352-01-E.- Light and Ordinary Hazard Occupancies Only..- Light Hazard Occupancies Only.
N/A - Not Available.
TABLE A
SEB'ES DS.I, QUICK BESPO/VSE . STANDARD COVEBAGE, DBY TYPE SPRINKLENS
LABORATOBY I'ST'NGS AND APPROVALS
PLUG WITH INLET
GASKETED SPRING
PLATE SEAL
YOKE
SPRING
CASING
WATER
TUBE
INSERT
GUIDE
TUBE BULB
SEAT
FRAME
3mm
BULB
VENT HOLE
DEFLECTOR
COMPRESSION
SCREW
FIGUBE I
SER'ES DS.l QUICK RESPONSE
DRY TYPE SPRINKLER ASSEMBLY
WRENCH
RECESS
PUSH WRENCH IN TO
ENSURE ENGAGEMENTWITH
SPRINKLER WRENCHING AREA
FIGURE 2
W-TYPE 7 SPRINKLEB WRENCH
TFPs{O Page 3 of 8
SPRINKLER FITTING
(REFER TO DESIGN
CRITERIA
FACE OF
SPRINKLER
FITTING
ORDER LENGTHS:
3- l/2" to 48"
(88,9 to 1219,2 mm)
lN 1/4" (6,4 mm)
INCREMENTS
2-114',DtA.
FACE OF
CEILING
1-3/8" t 1/8"
(34,9 + 3,2 mm)
FIGURE 3
TV3235 PENDENT
dSTANDARD RECESSED
ESCUTCHEON
2-7t8'DtA.
SPRINKLEB FITTING
(REFER TO DESTGN
CRITERIA
FACE OF
SPRINKLER
FITTING
ORDER LENGTHS:
3'1/2" to 48"
(88,9 to 1219,2 mm)
lN 1/4" (6,4 mm)
INCREMENTS
3" DtA.
FACE OF
CEILING
1-3/8" a 1/8"
(34,9 r 3,2 mm)
FIGURE 4
TY3235 PENDENT
M WIDE FLANGE RECESSED
ESCUTCHEON
3-5/8'DrA.
1 mm)
SPRINKLER FITTING
(REFER TO DESTGN
CRITEBIA
FACE OF
SPRINKLEB ii
FITTING
ORDER LENGTHS:
2-112', b 4g'^
(63,5 to 1219,2 mm)
lN 1/4" (6,4 mm)
INCFIEMENTS
1-3/4" DtA.
2-3/16" +1/8"
(55,6 * 3,2 mm)
FIGURE 5
TY3235 PENDENTil STANDARD
ESCUTCHEON
FACE OF
CEILING
3" DtA.
SPRINKLER FITTING
(REFER TO DESIGN
CRITERIA
FACE OF
SPRINKLER
FITTING
ORDER LENGTHS:
1/2" to 46"
(12,7 to 1168,4 mm)
lN 1/4" (6,4 mm)
ENTS
FACE OF
CEILING
4-1/4" x.118"
(q8,e mT)
2-1/2',DtA.
'108,0 * 3,2 mm)
FIGUBE 6
TY3235 PENDENTil DEEP ESCUTCHEON
SPRINKLER FITTING
DESIGN
FACE OF
SPRINKLER
FITTING
ORDER LENGTHS:
5" lo 48"
(127,0 to 1219,2mm)
tN 1/4" (6,4 mm)
INCREMENTS
MINIMUM
1-s/4" (44,5 mm)
DEFLECTOR
TO CEILING
FIGURE 7
TY3235 PENDENT
w/o ESCUTCHEON
TOP OF
DEFLECTOR
ORDER LENGTHS:
5" to 48"
(127,0 to 1219,2 mrn)
lN 1/4" (6,4 mm)
INCREMENTS
FACE OF
SPRINKLER
FITTING
SPRINKLER FITTING
(BEFER TO DESIGN
cRTTERtA SECTTON)
FIGURE 8
TY3135 UPRIGHT
w/o ESCUTCHEON
Page 4 of 8 TFPsIO
Operation
When the Series DS.1 is in service,
water is prevented from entering the
assembly by the Plug & Belleville Seal-
ing Assembly (Bel. Figure 1) in the
lnlet of the Sprinkler. The glass Bulb
contains a fluid that expands when ex-
posed to heat. When the rated tem-
perature is reached, the fluid expands
sufficiently to shatter the glass Bulb,
and the Bulb Seat is released. The
compressed Spring is then able to ex-
pand and push the Water Tube as well
as the Guide Tube outward. This action
simultaneously pulls inward on the
Yoke, withdrawing the Plug & Belleville
Seal from the lnlet allowing the sprin-
kler to activate and flow water.
Design
Griteria
The Series DS-1 Sprinklers are in-
tended lor use in fire sprinkler systems
designed in accordance with the
standard installation rules recognized
by the applicable Listing or Approval
agency (e.9., UL Listing is based on
NFPA 13 requirements).
The Series DS-1 Dry Type Sprinkler is
to be installed in the 1 inch NPT outlet
or run of malleable or ductile iron
threaded tee fittings that meet the di-
mensional requirements of ANSI
B16.3 (Class 150) or cast iron
threaded tee littings that meet the di-
mensional requirements of ANSI
816.4 (Class 125) with the end sprin-
kler fitting on a branch line to be
plugged as shown in Figures 3 - 11.
When installing 1 inch NPT Series
DS-1 Dry Type Sprinklers on a dry pipe
sprinkler system, only use the side
outlet ol maximum 2-112 inch size re-
ducing tee's.
For wet pipe sprinkler systems, the
Series DS-1 Dry Type Sprinklers may
also be installed in the 1 inch NPT
outlet of a Central Figure 730 Me-
chanical Tee or the following Tyco Fire
Products CPVC fittings: (P/N 80145)
NPT Female Adapter or (P/N
80249) 1" x 'l " x'l " NPT Sprinkler Head
Adapter Tee.
NOTE
Do not instalt the Series DS-l into any
other type fitting without first consult-
ing the Technical Services Depart-
ment. Failure to use the appropriate
fitting may result in: failure of the sprin-
kler to properly operate due to forma-
tion of ice over the inlet Plug or binding
of the inlet Plug; or, insufficient en-
ORDEFI LENGTHS;
2-112" to 48" (63,5 to 1219,2 mm)
rN 1/4" (6,4 INCBEMENTS 4" r 1/8"
(10i,6 r 3,2 mm)
FACE OF
SPRINKLEH
FITTING
FACE OF
MOUNTING
SURFACE
'1-3/4',DtA.
mm)
3'DlA.
{76,2 mm)
II
SPRINKLER FITTING
(REFEB TO DESTGN
cRtTERTA SECTTON)
CENTERLINE
OFWATERWAY
5116',
(7,9 mm)
FIGURE 9
TY3335 HOBZANTAL SIDEWALL wl STANDAED ESCUTCHEON
2-1t2',DtA.
mm)FACE OF
SPRINKLER
FITTING
ORDER LENGTHS:
1/2" 1o 45-914" (12,7 to 1162,1 mm)
rN 1/4'(6,4 INCREMENTS 4-13116" t 1/8"
(122,2 *3,2 mm)
3-1/2'DlA.
(88,9 mm)
3.5'
SPRINKLER FITTING
(REFER TO DESIGN CENTEFLINE 5/16"
CRITERIA SECTION) OF WATERWAY (7,9 mm)
FIGURE 1O
TY3335 HORTZONTAL STDEWALL w/ DEEP ESCUTCHEON
FACE OF
MOUNTING
SURFACE
FACE OF
SPRINKLER
FITTING
ORDER LENGTHS:
5" to 48" (127,0 to 1219,2 mm)
lN 1/4" (6.4 mm) INCREMENTS MINIMUM
2-114" (57,2mml
DEFLECTORTO
MOUNTING
SURFACE
3.5'5/16"
(7,9 mm)SPRINKLER FITTING
(REFER TO DESIGN CENTERLINE
CRITERIA SECTION) OF WATEFIWAY
F'GURE II
TY3335 HORIZONTAL SIDEWALL w/o EECUTCHEON
TFPsIO
gagement of the inlet pipe threads with
consequent leakage.
Branch, cross, and leedmain piping
connected to Dry Sprinklers and sub-
ject to freezing temperatures must be
pitched for drainage in accordance
with the minimum requirements of the
National Fire Protection Association
for dry pipe sprinkler systems.
When Dry Sprinklers are to be used in
wet pipe sprinkler systems protecting
areas subject to freezing temperatures
(e.9., sprinkler drops into freezers),
consideration must be given to the ap-
propriate length ol the sprinkler that
will prevent freezing ol the water in the
connecting pipes due to conduction.
When the temperature surrounding
the wet pipe sprinkler system is main-
tained at a minimum temperature of
40'Fl4'C, the lollowing are the mini-
mum recommended lengths between
the face ol the sprinkler fitting and the
outside surface ol the protected area
(i.e., length exposed to minimum am-
bient of 40'F/4"C):
. 12 inches (300 mm) when the tem-
perature within the protected area
is -20'F/-29'C
. 18 inches (450 mm) when the tem-
perature within the protected area
is -40'F/-40'C
r 24 inches (600 mm) when the tem-
perature within the protected area
is -60'F/-51"C
For protected area temperatures be-
tween those given above, the minimum
recommended length from the face of
the fitting to the outside ol the pro-
tected area may be determined by in-
terpolating between the indicated val-
ues.
NOTE
When Dry Sprinklers penetrate a ceil-
ing or wall into an area subject to freez-
ing, the clearance space around the
Sprinkler Casing must be completely
sealed in order to prevent the leakage
of moist air inta the freezing area
which might result in the formation of
condensate around the Frame, Deflec-
tor, Bulb Seat, or Bulb. Failure to pre-
vent Ihe formation of condensate could
result in the build-up of ice around the
releasing components. This could re-
sult an inadvertent operation of the
sprinkler or impaired operation due to
reduced thermal sensitivity.
Installation
The Series DS-1 Dry Type Sprinklers
must be installed in accordance with
the lollowing instructions:
NOIES
The Series DS-l must only be installed
in fittings that meet the requirements
of the Design Criteria section.
Refer to the Design Criteria section for
other important requirements regard-
ing piping design and sealing of the
clearance space around the Sprinkler
Casing.
Do not install any bulb type sprinkler if
the bulb is cracked or there is a loss of
liquid from the bulb. With the sprinkler
held horizontally, a small air bubble
should be present. The diameter of the
air bubble is approximately 1/16 inch
(1 ,6 mm) for the 135"F/57"C rating to
1/8 inch (3,2 mm) for the 286"F/141'C
rating.
A leak tight 1 inch NPT sprinkler joint
should be obtained with a torque of 20
to 30 ft.lbs. (26,8 to 40,2 Nm). Higher
levels of torque may distort the sprin-
kler inlet with consequent leakage or
impairment of the sprinkler.
Do not attempt to compensate for in-
sufficient adjustment in an Escutcheon
Plate by under- or over-tightening the
Sprinkler. Beadjust the position of the
sprinkler fitting to suit.
Step 1. Pendent sprinklers must be
installed only in the pendent position,
and upright sprinklers must be in-
stalled only in the upright position. The
deflector of a pendent or upright sprin-
kler is to be parallel to the ceiling.
Horizontal sidewall sprinklers are to be
installed in the horizontal position with
their centerline ol waterway perpen-
dicular to the back wall and parallel to
the ceiling. The word "TOP" on the De-
flector is to face towards the ceiling.
Step 2. With pipe thread sealant ap-
plied to the inlet threads, hand tighten
the sprinkler into the sprinkler litting.
Step 3. Wrench tighten the sprinkler by
wrenching on the Casing with a pipe
wrench whenever the casing is readily
accessible. Otherwise, use a W-Type 7
Sprinkler Wrench (Ref. Figure 2). The
wrench recess of the W-Type 7 is to be
applied to the sprinkler wrench llats
(Rel. Figure 2).
Step 4. Aiter the ceiling/wall has been
installed/finished, slide on the outer
piece of the Escutcheon until it comes
in contact with the ceiling/wall. Do not
lift the ceiling panel out of its normal
position.
ln the case of the outer piece of the
Page 5 of 8
Deep Escutcheon, hold the outer
piece in contact with the mounting sur-
face (ceiling), and then rotate the inner
piece approximately 114 turn with re-
spect to the outer piece, to hold the
Deep Escutcheon firmly together.
Care and
Maintenance
The Series DS-1 Dry Type Sprinklers
must be maintained and serviced in
accordance with the following instruc-
tions:
NOTES
Absence of the outer piece of an es-
cutcheon, which is used to cover a
clearance hole, may delay the time to
sprinkler operation in a fire situation.
Before closing a fire protection system
main control valve for maintenance
work on the fire protection system that
it controls, permission to shut down
the affected tire protection systems
must be obtained from the proper
authorities and all personnel who may
be affected by this action must be no-
tified.
A Vent Hole is provided in the Bulb
Seat (Ref. Figure 1) to indicate it the
Dry Sprinkler is remaining dry. Evi-
dence of leakage from the Vent Hole
is an indication that there may be
weepage past the lnlet seal and that
the sprinkler needs to be removed for
determining the cause ol leakage (e.9.
an improper installation or an ice plug).
The fire protection system control
valve must be closed and the system
drained before removing the sprinkler.
Sprinklers that are found to be leaking
or exhibiting visible signs of corrosion
must be replaced.
Automatic sprinklers must never be
painted, plated, coated, or otherwise
altered after leaving the factory. Modi-
fied sprinklers must be replaced.
Sprinklers that have been exposed to
corrosive products of combustion, but
have not operated, should be com-
pletely cleaned by wiping the sprinkler
with a cloth or by brushing it with a solt
bristle brush.
Care must be exercised to avoid dam-
age - before, during, and after instal-
lation. Sprinklers damaged by drop-
ping, striking, wrench twisVslippage,
or the like, must be replaced. Also,
replace any sprinkler that has a
cracked bulb or that has lost liquid f rom
its bulb (Ref. lnstallation Section).
The owner is responsible for the in-
spection, testing, and maintenance of
their fire protection system and de-
vices in compliance with this docu-
Page 6 of I
ment, as well as with the applicable
standards of the National Fire Protec-
tion Association (e.9., NFPA 25), in
addition to the standards of any other
authorities having jurisdiction. The in-
stalling contractor or sprinkler manu-
facturer should be contacted relative to
any questions.
It is recommended that automatic
sprinkler systems be inspected,
tested, and maintained by a qualified
lnspection Service in accordance with
local requirements and/or national
codes.
Limited
Wawanty
Products manufactured by Tyco Fire
Products are warranted solely to the
original Buyer for ten (10) years
against defects in material and work-
manship when paid for and properly
installed and maintained under normal
use and service. This warranty will ex-
pire ten (10) years lrom date of ship-
ment by Tyco Fire Products. No war-
ranty is given for products or
components manufactured by compa-
nies not affiliated by ownership with
Tyco Fire Products or for products and
components which have been subject
to misuse, improper installation, corro-
sion, or which have not been installed,
maintained, modified or repaired in ac-
cordance with applicable Standards ol
the National Fire Protection Associa-
tion, and/or the standards ol any other
Authorities Having Jurisdiction. Mate-
rials lound by Tyco Fire Products to be
defective shall be either repaired or
replaced, at Tyco Fire Products' sole
option. Tyco Fire Products neither as-
sumes, nor authorizes any person to
assume for it, any other obligation in
connection with the sale of products or
parts ol products. Tyco Fire Products
shall not be responsible for sprinkler
system design errors or inaccurate or
incomplete inlormation supplied by
Buyer or Buyer's representatives.
IN NO EVENT SHALL TYCO FIRE
PRODUCTS BE LIABLE, IN CON-
TRACT, TORT, STRICT LIABILITY OR
UNDER ANY OTHER LEGAL THE.
ORY FOR INCIDENTAL, INDIRECT,
SPECIAL OFI CONSEQUENTIAL
DAMAGES, INCLUDING BUT NOT
LIMITED TO LABOR CHARGES, RE-
GARDLESS OF WHETHER TYCO
FIRE PRODUCTS WAS INFORMED
ABOUT THE POSSIBILITY OF SUCH
DAMAGES, AND IN NO EVENT
SHALL TYCO FIRE PRODUCTS'LI-
ABILITY EXCEED AN AMOUNT
EQUAL TO THE SALES PRICE.
THE FOREGOING WARRANTY IS
MADE IN LIEU OF ANY AND ALL
OTHEN WARRANTIES EXPRESS OR
IM P LI E D. I NC LU D I N G WAR R ANTI E S
OF MERCHANTABILITY AND FIT.
NESS FOR A PARTICULAR PUR'
POSE.
Ordering
Procedure
Contact your local distributor for avail-
ability, and please specily the follow-
ing:
1. Sprinkler.
. Model/SlN.
. Quick Response, Standard Cover-
age, Dry Type Sprinkler
. Detlector Style.
. 5.6 K{actor.
. Order Length.
Dry Type Sprinklers are furnished
based upon Order Length as
measured per Figure 3 through
11, as applicable. After the meas-
urement is taken, round it to the
nearest 1/4 inch increment.
. lnlet Connection (1 lnch NPT or
rso 7-R1).
. Temperature Rating.
. Sprinkler Finish.
r Escutcheon Style and Finish, as
applicable.
. Part Number from Table B. (Part
numbers are for 1 inch NPT stand-
ard order sprinklers. Orders for all
other sprinkler assemblies must
be accompanied by a complete
description.)
2. W-Type 7 Sprinkler Wrench.
Refer to the Price List for complete
listing of Part Numbers.
TFsIO
MODEUSIN
do Pendent w/ Standard
Escutcheon (1'NPT)
TY3235
(Fis. 5)
33 Pendent wi Deep
Escutcheon (1" NPT)
TY3235
(Fig. 6)
37
Escutcheon (1" NPT)
Pendent w/ Std.TY3235
(Fig. 3)
32 Pendent w/o Escutcheon
Escutcheon (1'NPT)
TY3235
(Fig. 7)
34 Sidewall w/ Standard
Escutcheon (1" NPT)
TY3335
(Fis. e)
43 Sidewall wi Deep
Escutcheon (1" NPT)
TY3335
(Fis. 10)
44 Sidewall w/o
Escutcheon (1" NPT)
TY3335
(Fis.11)
38 Upright w/o Escutcheon
(1" NPT)
TY3135
(Fig. 8)
TFPStO
P/N60-XXX-X-XXX
Page 7 oI I
NOTES
(1). Dry Type Sprinklers are furnished based upon "Order Length"
as measured per Figures 3 through 11, as applicable, and for
each individual sprinkler where it is to be installed. After the meas-
urement is taken, round it to the nearest 1/4 inch increment.
(2). Escutcheon Finish applies to sprinklers provided with
escutcheons.
(3). The 286F1141C temperature rating applies to
non-recessed sprinkler assemblles.
* Eastern Hemisphere sales only.
TABLE B
PABT NUMBEB SELECTION
SEFTES DS-l, QUICK FESPO'VSE, STANDARD COVERAGE, DRV TypE SPFTMLEFS
(Use Prefix "1" for ISO 7-RI Connection, e.9., h60-361-1-180)
SPRINKLER
FINISH
ESCUTCHEON
FrNrsH (2)
1 NATURAL BRASS WHITE
4 WHITE POLYESTER WHITE
I CHFIOME PLATED CHROME PLATED
0 CHROME PLATED WHITE
a wHrTE (RAL9010).wHrTE (RA19010).
ORDER
LENGTH (1)
(EXAMPLES)
055 5.50"
082 8.25"
180 18.00"
187 18.75"
372 37.25',
480 48.00"
TEMPERATUBE
BAING (3)
0 135F157C
1 1 55F/6BC
2 175F/79C
a 200F/93C
4 286F1141C
Page 8 of 8 TFsIO
TYCO FIRE PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19446
tqca Fire & Building frProducfs
r.apid rresponse'
Hoalr Frnr Spnrurtgn Svsrem
Technical Services: Tel: (800) 381-9312 / Fax: (800) 791-5500
Series LFII Residential
Concealed PendenJ Sprinklers, FIaJ Plate
4.9 K-facJor
General
Description
The Series LFll (TY3596) Residential
Concealed Pendent Sprinklers are
decorative, fast response, fusible sol-
der sprinklers designed for use in resi-
dential occupancies such as homes,
apartments, dormitories, and hotels.
The cover plate assembly conceals
the sprinkler operating components
above the ceiling. The flat profile of the
cover plate provides the optimum aes-
thetically appealing sprinkler design.
ln addition, the concealed design of
the Series LFll (TY3596) provides 1/2
inch (12,7 mm) vertical adjustment.
This adjustment reduces the accuracy
to which the fixed pipe drops to the
sprinklers must be cut to help assure
a perfect fit installation.
The Series LFll are to be used in wet
pipe residential sprinkler systems for
one- and two-family dwellings and mo-
bile homes per NFPA 13D; wet pipe
residential sprinkler systems for resi-
dential occupancies up to and includ-
ing four stories in height per NFPA
1 3R; or, wet pipe sprinkler systems for
the residential portions of any occu-
pancy per NFPA 13.
The Series LFII (ry3596) has a 4.9
(60,5) K-factor that provides the re-
quired residentialflow rates at reduced
IMPORTANT
Always refer to Technical Data
Sheet TFP700 for the "INSTALLER
WARNING' that provides cautions
with respect to handling and instal-
lation of sprinkler systems and com-
ponents. lmproper handling and in-
stallation can permanently damage
a sprinkler system or its compo-
nents and cause the sprinkler to fail
to operate in a fire situation or cause
it to operate prematurely.
pressures, enabling smaller pipe sizes
and water supply requirements.
The Series LFll (TY3596) has been
designed with heat sensitivity and
water distribution characteristics
proven to help in the control of residen-
tial fires and to improve the chance for
occupants to escape or be evacuated.
The Series LFll (TY3596) Residential
Concealed Pendent Sprinklers are
shipped with a Disposable Protective
Cap. The Protective Cap is temporarily
removed for installation, and then it
can be replaced to help protect the
sprinkler while the ceiling is being in-
stalled or finished. The tip of the Pro-
tective Cap can also be used to mark
the center of the ceiling hole into plas-
ter board, ceiling tiles, etc. by gently
pushing the ceiling product against the
Protective Cap. When the ceiling in-
stallation is complete the Protective
Cap is removed and the Cover Plate
Assembly installed.
WARNINGS
The Series LFll (IY3596) Residential
Concealed Pendent Sprinklers de-
scribed herein must be installed and
maintained in compliance with this
document, as well as with the applica-
ble standards of the National Fire Pro-
tection Association, in addition to the
standards of any other authorities hav-
ing jurisdiction. Failure to do so may
impair the pertormance of these de-
vices.
The owner is responsible for maintain-
ing their fire protection system and de-
vices in proper operating condition.
The installing contractor or sprinkler
manufacturer should be contacted
with any questions.
a
Technical
Data
Approvals:
UL and C-UL Listed
Maximum Working Pressure:
175 psi (12,1bar)
Discharge Coefficient:
K = 4.9 GPM/psi1/2 (70,6 LPM/bartrz;
Temperature Rating:
1 60'F/71'C Sprinkler with
135"F157"C Cover Plate
Vertical Adjustment:
ll2inch (12,7 mm)
Finishes:
Cover Plate:
Flat White, Bright White, Chrome, or
Custom
Physical Characteristics:
Body . Brass
Cap . . BronzeSaddle Brass
Sealing Assembly
, Beryllium Nickel M Teflonf
Soldered Link Halves . Nickel
Lever . Bronze
Compression Screw . BrassDeflector Copper or Brass
Guide Pin Housing Bronze
SprinklerIModeI
IdenJiJication
Number
srN TY3596
Page 1 ol 4 JANUARY,20(,6 TFP442
Page 2 oI 4
Guide Pins . Stainless SteelSupportCup .. Steel
Cover Plate CopperRetainer Brass
Cover Plate Ejection Spring .
. . Stainless Steel
f DuPont Registered Trademark
Operation
When exposed to heat from a fire, the
Cover Plate, which is normally sol-
dered to the Support Cup at three
points, falls away to expose the Sprin-
klerAssembly. At this point the Deflec-
tor supported by the Arms drops down
to its operated position. The fusible
link of the Sprinkler Assembly is com-
prised of two link halves that are sol-
dered together with a thin layer of sol-
der. When the rated temperature is
reached, the solder melts and the two
link halves separate allowing the sprin-
kler to activate and flow water.
Design
Criteria
The Series LFll (TY3596) Residential
Concealed Pendent Sprinklers are UL
and C-UL Listed for installation in ac-
cordance with the following criteria.
NOTE
When conditions exisf that are outside
the scope of the provided criteria, refer
to the Residential Sprinkler Design
Guide TFP490 for the manufacturer's
recommendations that may be accept-
able to the Authority Having Jurisdic-
tion.
System Type. Only wet pipe systems
may be utilized.
Hydraulic Design. The minimum re-
quired sprinkler flow rate for systems
designed to NFPA 13D or NFPA 13R
are given in Table A as a function of
temperature rating and the maximum
allowable coverage areas. The sprin-
kler flow rate is the minimum required
discharge from each of the total
number of "design sprinklers" as
specified in NFPA 13D or NFPA 13R.
Forsystems designed to NFPA 13, the
number of design sprinklers is to be
the four most hydraulically demanding
sprinklers. The minimum required dis-
charge from each of the four sprinklers
is to be the greater of the following:
r The flow rates given in Table A for
NFPA 13D and 13R as a function of
temperature rating and the maxi-
mum allowable coverage area.
. A minimum discharge of 0.1 gpm/sq.
ft. over the "design area" comprised
of the four most hydraulically de-
manding sprinklers for the actual
TFP442
coverage areas being protected by
the four sprinklers.
Obstruction To Water Distribution.
Locations of sprinklers are to be in
accordance with the obstruction rules
of NFPA 13 for residential sprinklers.
Operational Sensitivity. The sprin-
klers are to be installed relative to the
ceiling mounting surface as shown in
Figure 3.
Sprinkler Spacing. The minimum
spacing between sprinklers is 8 feet
(2,4 m). The maximum spacing be-
tween sprinklers cannot exceed the
length of the coverage area (Ref. Ta-
ble A) being hydraulically calculated
(e.9., maximum 12 feet for a 12 ft. x
1 2 ft. coverage area, or 20 feet for a 20
ft. x 20 ft. coverage area).
InsJaIIation
The Series LFll (TY3596) must be in-
stalled in accordance with the follow-
ing instructions:
A'OIES
Damage to the fusible Link Assembly
during installation can be avoided by
handling the sprinkler by the support
cup only (i.e., do not apply pressure to
the fusible link Assembly).
A leak tight 1/2 inch NPT sprinkler joint
should be obtained with a torque of 7
to 14 ft.lbs. (9,5 to 19,0 Nm). A maxi-
Maximum
Coverage
[ys6 (a)
Ft. x Ft.
(mxm)
Maximum
Spacing
Ft.
(m)
Minimum flew(b) snd
Residual Pressure
For Horizontal Ceiling
(Max. 2lnch Rise
for {2 lnch Run)
I 60'F/71 "C
Sprinkler
12x12
(3,7 x 3,7)
12
(3,7)
'r3 GPM (49,2 LPM)
7.0 psi (0,48 bar)
14x14
(4,3 x 4,3)
14
(4,3)
13 GPM (53,0 LPM)
7.0 psi (0,48 bar)
16x16
(4,9 x 4,9)
16
(4,s)
13 GPM (60,6 LPM)
7.0 psi (0,48 bar)
18x18
(5,s x 5,5)
18
(5,5)
17 GPM (64,3 LPM)
12.0 psi (0,83 bar)
20x20
(6,1 x 6,1)
20
(6,1)
20 GPM (75,7 LPM)
16.7 psi (1,15 bar)
(a) For coverage area dimensions less than or between those indicated, it is necessary to use the minimum required flow for the
next highest coverage area for which hydraulic design criteria are stated.
(b) Requirement is based on minimum flow in GPM (LPM) from each sprinkler. The associated residual pressures are calculated
using the nominal K-factor. Refer to Hydraulic Design Criteria Section for details.
TABLE A
NFPA 13D AND NFPA 13R WET PIPE HYDRAULIC DESIGN CRITERIA
FOR THE SERTES LFII (TY3596) RESTDENTIAL CONCEALED PENDENT SPRINKLER
TFP442 Page 3 of 4
mum of 21 tt.lbs. (28,5 Nm) of torqueis to be used to install sprinklers.
Higher levels of torque may distort the
sprinkler inlet with consequent leak-
age or impairment of the sprinkler.
Do not attempt to compensate for in-
sufficient adjustment in the Cover
Plate/Retainer Assembly by under- or
over-tightening the Sprinkler. Read-
just the position of the sprinkler fitting
to suit.
Step 1. The sprinkler must only be
installed in the pendent position and
with the centerline of the sprinkler per-
pendicular to the mounting surface.
Step 2. Remove the Protective Cap.
Step 3. With pipe thread sealant ap-
plied to the pipe threads, and using
the W-Type 18 Wrench shown in Fig-
ure 2, install and tighten the Sprink-
ler/Support Cup Assembly into the fit-
ting. The W-Type 18 Wrench will
accept a 112 inch ratchet drive.
WRENCH
RECESS
PUSH \A/RENCH
IN TO ENSURE
ENGAGEMENT
WTH SPRINKLER
WRENCHINGAREA
FIGURE 2
W.TYPE 18
SPRINKLER WRENCH
BODY
(1/2'NPr)
SEALING
ASSEMBLY
CAP SPRINKLER
WRENCHING
AREA
SADDLE
SUPPORT
CUP WTH
COMPRESSION
SCREW
ROLL FORMED
THREADS
LEVER
GUIDE
PIN
SOLDER LINK
ELEMENT
GUIDE PIN
HOUSING
DEFLECTOR
ll
I I t---j-
l-. -----
DEFLECTOR
(OPERATED
POSTTTON)
SPRINKLER/SUPPORT CUP
ASSEMBLY
THREAD INTO
SUPPORT CUP
UNTIL MOUNTING
SURFACE IS
FLUSH WTH
CEILING
RETAINER
WTH THREAD
DIMPLES
EJECTION
SPRING
SOLDER
TAB
COVER PLATE/RETAINER
ASSEMBLY COVER
PLATE
FIGURE 1
SERTES LFil (TY3596) RESIDENTTAL
CONCEALED PENDENT SPRINKLER
112"
NPT
2-112',DtA.
(63,5 mm)
COVER. SPRINKLER-
RETAINER SUPPORTCUP
ASSEMBLY ASSEMBLY
3-3/16'DlA.
(81,0 mm)
112" (12,7 mm)
THREADED
ADJUSTMENT
FACE OF
SPRINKLER
FITTING
SPRINKLER-
SUPPORT CUP
ASSEMBLY
OPERATED
SPRI
COVER
PLATE
RETAINER
(3,2
.
1/8" GAP
1-7t8"t1t8"
(47,6 mm
+3,2 mm)
MOUNTING
SURFACE
-L
=1s/10" l
(4,8 mm)
718" (22,2mm)
1-1l8" (28,6 mm)
DISPOSABLE
PROTECTIVE CAP
DEFLECTOR IN
OPERATED POSITIONTIP
FIGURE 3
SER'ES LFII (TY3596) RESIDENTIAL CONCEALED PENDENT SPRINKLER
INSTALLATION DIMENSIONS / PROTECTIVE CAP / ACTIVATED DEFLECTOR
Page 4 ot 4
Step 4. Replace the Protective Cap by
pushing it upwards until it bottoms out
against the Support Cup. The Protec-
tive Cap helps prevent damage to the
Deflector and Guide Pins during ceil-
ing installation and/or during applica-
tion of the finish coating of the ceiling.
It may also be used to locate the center
of the clearance hole by gently push-
ing the ceiling material against the
center point of the Cap.
NOTE
As long as the protective Cap remains
in place, the system is considered to
be "Out Of Seruice".
Step 5. After the ceiling has been com-
pleted with lhe 2-112 inch (63 mm)
diameter clearance hole and in prepa-
ration for installing the Cover Plate As-
sembly, remove and discard the Pro-
tective Cap, and verify that the
Deflector moves up and down freely.
lf the Sprinkler has been damaged and
the Deflector does not move up and
down freely, replace the entire Sprin-
kler assembly. Do not attempt to mod-
ify or repair a damaged sprinkler.
Step 6. Screw on the Cover Plate As-
sembly until its flange comes in con-
tact with the ceiling.
Do not continue to screw on the Cover
Plate Assembly such that it lifts a ceil-
ing panel out of its normal position.
lf the Cover Plate Assembly cannot be
engaged with the Mounting Cup or the
Cover Plate Assembly cannot be en-
gaged sufficiently to contact the ceil-
ing, the Sprinkler Fitting must be repo-
sitioned.
Care and
MainJenance
The Series LFll (TY3596) must be
maintained and serviced in accord-
ance with the following instructions:
NOTES
Absence of a Cover Plate may delay
the sprinkler operation in a fire situ-
ation.
Before closing a fire protection system
main control valve for maintenance
work on the fire protection system
which it controls, permission to shut
down the affected fire protection sys-
tem must be obtained from the proper
authorities and all personnel who may
be affected by this action must be no-
tified.
Sprinklers which are found to be leak-
ing or exhibiting visible signs of corro-
sion must be replaced.
Automatic sprinklers must never be
painted, plated, coated, or otherwise
altered after leaving the factory. Modi-
fied or over heated sprinklers must be
replaced.
Care must be exercised to avoid dam-
age - before, during, and after instal-
lation. Sprinklers damaged by drop-
ping, striking, wrench twisVslippage,
or the like, must be replaced.
The owner is responsible for the in-
spection, testing, and maintenance of
their fire protection system and de-
vices in compliance with this docu-
ment, as well as with the applicable
standards of the National Fire Protec-
tion Association (e.9., NFPA 25), in
addition to the standards of any other
authorities having jurisdiction. The in-
stalling contractor or sprinkler manu-
facturer should be contacted relative
to any questions.
NOTE
The owner must assure that the sprin-
klers are not used for hanging of any
objects and that the sprinklers are only
cleaned by means of gently dusting
with a feather duster; otherwise, non-
operation in the event of a fire or inad-
vertent operation may result.
It is recommended that automatic
sprinkler systems be inspected,
tested, and maintained by a qualified
lnspection Service in accordance with
local requirements and/or national
codes.
Limited
WarranJy
Products manufactured by Tyco Fire &
Building Products (TFBP) are war-
ranted solely to the original Buyer for
ten (10) years against defects in mate-
rial and workmanship when paid for
and properly installed and maintained
under normal use and service. This
warranty will expire ten (10) years
from date of shipment by TFBP. No
warranty is given for products or com-
ponents manufactured by companies
not affiliated by ownership with TFBP
or for products and components which
have been subject to misuse, improper
installation, corrosion, or which have
not been installed, maintained, modi-
fied or repaired in accordance with ap-
plicable Standards of the National Fire
Protection Association, and/or the
standards of any other Authorities
Having Jurisdiction. Materials found
by TFBP to be defective shall be either
repaired or replaced, at TFBP's sole
option. TFBP neither assumes, nor
authorizes any person to assume for it,
any other obligation in connection with
the sale of products or parts of prod-
TFP442
ucts. TFBP shall not be responsible for
sprinkler system design errors or inac-
curate or incomplete information sup-
plied by Buyer or Buyer's repre-
sentatives.
ln no event shall TFBP be liable, in
contract, tort, strict liability or under
any other legal theory, for incidental,
indirect, special or consequential dam-
ages, including but not limited to labor
charges, regardless of whether TFBP
was informed about the possibility of
such damages, and in no event shall
TFBP's liability exceed an amount
equal to the sales price.
The foregoing warranty is made in lieu
of any and all other warranties. ex-
press or implied, including warranties
of merchantability and fitness for a
oarticular ourpose.
This limited warranty sets forth the ex-
clusive remedy for claims based on
failure of or defect in products, materi-
als or components, whether the claim
is made in contract, tort, strict liability
or any other legal theory.
This warranty will apply to the full ex-
tent permitted by law. The invalidity, in
whole or part, of any portion of this
warranty will not affect the remainder.
Ordering
Procedure
When placing an order, indicate the
full product name. Contact your local
distributor for availability..
Sprinkler Assembly:
Series LFll (TY3596), K=4.9, Residen-
tial Concealed Pendent Sprinkler with-
out Cover Plate Assembly,
P/N 51-112-1-160.
Cover Plate Assembly:
Cover Plate Assembly having a (spec-
ify) finish for the Series LFll (TY3596),
K=4.9, Residential Concealed Pen-
dent Sprinkler, P/N (specifo).
Chrome . . .
Off White. .
Bright White
Flat White .
P/N 56-122-9-135
P/N 56-122-0-135
P/N 56-122-4-1 35
PiN 56-122-5-135
P/N 56-122-3-135
P/N 56-122-X-13s
Vvhite (RA19010)t
Custom
"Eastern Hemisphere sales only
Sprinkler Wrench:
Specify: W-Type 1 8 Sprinkler Wrench,
P/N 56-000-1-265.
TYCO FIRE & BUILDING PRODUCTS,451 North Cannon Avenue, Lansdale, Pennsylvania 19446
Technical Services: Tel: (800) 381-9312 / Fax: (800) 791-5500
frgcr
Products
Fire & Suilding
Model 573 (13t Rrber ManiJold
7-7fr2 thru 6 Inch (DN4O Jhru DN75O,
For NFPA 73 Sprinkler Systems
General
Description
The Figure 513 (13) Riser Manifolds
described in this technical data sheet
provide the necessary waterflow
alarm, pressure gauge, alarm test ori-
fice, drain, and sight glass equipment
in a single assembly for use in NFPA
13 sprinkler systems as follows:
NFPA 13*
. 1-112lnch (DN40)
Male Thread x Female Thread
c 1-112 thru 6 lnch (DN40 thru DN150)
Groove x Groove
-Although the Riser Manifold described in
this data sheet is intended for NFPA 13
sprinkler systems, it may be used for NFPA
13D or 13R residential sprinkler systems,
where a test orifice of 5.6K (80K) is accept-
able.
The variety of sizes and grooved end
connections allow cost effective and
easy transition to check valves, control
valves, and system piping. The Riser
Manifolds may be installed in eitherthe
horizontal (flow switch on top) or verti-
cal (flow going up) for both single
sprinkler rises and floor control in high
rises.
WARNING
The Riser Manifolds described herein
must be installed and maintained in
compliance with this document, as
well as with the applicable standards
of the National Fire Protection Asso-
ciation, in addition to the standards of
any other authorities having jurisdic-
tion. Failure to do so may impair the
performance of these devices.
The owner is responsible for maintain-
ing their fire protection system and de-
vices in proper operating condition.
The installing contractor or sprinkler
manufacturer should be contacted
with any questions.
Technical
Dala
Approvals
The Figure 513 (Riser Manifolds
with a cover tamper switch for the wa-
terflow alarm switch are UL Listed,
ULC Listed, and FM Approved.
The Figure 513 (13) Riser Manifolds
without a cover tamper switch for the
waterflow alarm switch are UL Listed
and FM Approved.
Maximum Working Pressure
175 psi (12,1bar)
Test Orifice
5.6K (80K)
Assembly
The manifold body of the Figure 513 is
ductile iron, whereas the manifold
body of the Figure 13 is cast iron. The
two assemblies are completely inter-
changeable in function, application,
and end-to-end laying length.
Finish
Red painted.
Installation
The Riser Manifolds may be installed
in either the horizontal (flow switch on
top) or vertical (flow going up). The
inlet of the Riser Manifold may be di-
rectly connected to a shut-off control
valve.
NOTES
Where applicable pipe thread sealant
is to be applied sparingly. Use of a
non-hardening pipe thread sealant is
recommended.
Never remove any piping component
nor correct or modify any piping defi-
ciencies without first depressurizing
and draining the system.
Step 1. lnstall the manifold body with
the flow arrow pointing in the down-
stream position using threaded con-
nections and/or listed mechanical
grooved connections, as applicable
Step 2. Connect the drain line, and
then close the drain valve.
Step 3. Refer to Figure 3 for wiring
guidance. All wiring must be per-
formed in accordance with the Author-
ity Having Jurisdiction and/or the Na-
tional Electrical Code.
Step 4. Refer to Figure 4 for optional
relief valve.
Step 5. Place the system in service by
filling the system with water. When fill-
ing the system, partially open the con-
trol valve to slowly fill the system. Frl/-
ing the system slowly will help avoid
damaging the waterflow alarm switch.
After the system is fully pressurized,
completely open the control valve.
Step 6. Secure all supply valves
open.
Page 1 of 6 APRIL,2006 TFP962
Page 2 oi 6 TFP962
NO. DESCRIPTION
1 1-1l2" Manifold Body,
Malex Female NPT....
GroovexGroove......2 WaterflowAlarmSwitch:
VSR-SF with Paddle,
UUFM ..
VSR-SF with Paddle and
Cover Tamper Switch,
ULC/FM .3 300 psi/2000 kPa
Water Pressure Gauge .
ow. P/N
1 971-096-00
1 976-519-02
1 2341
1
I
N/A
N/A
NOTES:
1. Approximate weight, 11.2 lbs. (5,1 kg).
2. ULC Listed Manifolds are equipped with
Cover Tamper Switches installed intemal
to the WaterflowAlarm Switches.
3. CH: Common Hardware
3
14-1t4"
'10" (254,0 mm)
Male x Female NPT,
Groove x Groove
Manifolds
mm)
lnspedofs Test
& Drain Valve
(Normally set
to "Drain")
t Eo3o€11-1l8" (282,6 mm)
Male x Male NPT Drain Valve
(Normally
Closed)
1
2
3t4"'t"
5-3/16'
(131,8 mm)
3-1t2"
(88,9 mm)
(19,1 mm)NPT
6-1/8"
(155,6 mm)
12-5t8"
(320,7 mm)
FIGURE 1
1-1/2 INCH (DN40) R,SER MANTFOLD ASSEMBLY AND DtiltENStONS
TFPg62 Page 3 of 6
2 rNCH (DN50) MANTFOLD
NO. DESCRIPTION
1 2" Manifold Body,
GroovexGroove.....2 WaterflowAlarmSwitch:
VSC with Paddle,
UL/FM ..
VSC with Paddle and
Cover Tamper Swilch,
ULC/FM .3 300 psi/2000 kPa
Water Pressure Gauge
QTY P/N
1 N/A
1 976-357-01
'l 976-520-01
'l 2341
4 rNCH (DN100) MANTFOLD
NO. DESCRIPTION QTY P/N
1 4" Manifold Body,
GroovexGroove.....2 WaterflowAlarmSwitch
VSC with Paddle,
UL/FM . .
VSC with Paddle and
Cover Tamper Swilch,
ULC/FM .3 300 psi/2000 kPa
Water Pressure Gauge
1 N/A
1 976-357-04
1 976-520-04
1 2341
NO.
1
2
3
6 INCH (DN150) MANTFOLD
DESCRIPTION QTY. P/N
6" Manifold Body,
GroovexGroove....... 1 N/A
Waterflow Alarm Switch:
VSC with Paddle,
UL/FM ...... ......... 1 976-357-05
VSC with Paddle and
Cover Tamper Switch,uLc/FM.............. 1 976-520-05
300 psi/2000 kPa
VvaterPressurecauge .. 1 2341
2-1'2 rNCH (DN65) MANTFOLD
NO. DESCRIPTION QTY. P/N
1 2-1l2" Manifold Body,
GroovexGroove.....2 WaterflowAlarmSwitch:
VSC with Paddle,
UL/FM ..
VSC with Paddle and
Cover Tamper Switch,
ULC/FM .3 300 psi/2000 kPa
Water Pressure Gauge
1 N/A
'l 976-357-02
1 976-520-02
1 2341
Manifold
Size
Nominal lnstallation Dimensions in lnches and (mm)Drain Size Weight
lbs. (ks)B c D E F G H
2 lnch
(DN50)
16-3t4
r'.25.5\
13
(330.2)
9/16
(14.3)
5-3/8
(136.5)
6-3/8
(161.9)
13-1/16
(331.8)
3-112
(88.9)1" NPT 13.5
(6.1)
2-112 lnch
(DN65t
17-3t16
1436.61
13
1330 2l
1
Q5.4\
5-3t4
(146.1)
6-7t8
(174.6\
't3-3t4
(349.3)
3-1t2
(88.9)1-1l4" NPT 16.8
(7.6)
3 lnch
(DN80)
17-3t16
(436.6)
'13
(330.2)
1
(25 4\
6
(52.4\
7-1t8
(181.0)
14-1t4
(362.0)
3-'v2
(88.9)1-1l4',NPT 18.7
(8.5t
4 lnch
(DN100)
20-1t2
(520.7\
13
(330.2)
4-5t16
(109.5)
7-9t16
(92.1\
9-1/16
(2302\
16-5/8
G22.31
4-1t2
(11 4.3)2" NPT 32.7
(14.8)
6lnch
/DN150l
20-1t2
(5?O 7\
13
(330.2)
4-5t16
(109.5)
8-1t2
(215.9)
10
(254.O\
18-1t2
{469.9t
6-5/8
(1 68 3)2" NPT 41.6
(18.9)
3 rNCH (DN80) MANTFOLD
NO. DESCRIPTION QTY. P/N
1 3" Manifold Body,
GroovexGroove.....2 \ hterflowAlarm Switch:
VSC with Paddle,
UL/FM .,
VSC with Paddle and
Cover Tamper Switch,
ULC/FM .3 300 psi/2000 kPa
Water Pressure Gauge
1 N/A
1 976-357-03
1 976-520-03
1 2341
1 3
Drain Valve
(Normally
Closed)
NOTES:
1. ULC Listed Manifolds are equipped with
Cover Tamper Switches installed inlernal
lo the WaterflowAlarm Switches.
2. CH: Common Hardware
t Foao{
2
B
[-D Testc& Drain Valve
(Normally set
to "Drain")E
H
F
FIGURE 2
2 thru 6 INCH (DN50 thru DN|50) RTSER MANIFOLD ASSEMBLY AND DIMENSTONS
@
Page 4 of 6 TFPg62
SWITCH TERIIiIINAL CONNECTIONS
IJNINSULATED
LOOPED SECTION CAUTION:
An uninsulated seclion of a
single conductor is nol
permitted to be looped around
the terminal and serve as two
separate conneclions. The
wire must be severed to serve
as lwo separate connections,
thereby providing supervision
of the connection in the event
that the wire becomes
dislodged from the terminal.
CLAMPING
PLATE
TERMINAL
SEVERED
STRIPPED
ENDSSINGLE
CONDUCTOR SEPARATE
CONDUCTORS
CLAMPING
PLATE
TERMINAL INCOMING
IMPROPER CONNECTION METHOD
OUTGOING
PROPER CONNECTION METHOD
WATERFLOW SWITCH TYPICAL ELECTRICA CONNECTIONS
CoNTACTS . ....
CONTACT RATING
SPDT (Form C)
5A @ 125 VAC
2.sA @ 30 VDC
LOCAL
SIGNAL
DEVICE
END OF LINE
RESISTOR
NC
NO NC NO
NOa NC coM
coM
coM CONTROL
PANELPOWER
NO FLOW
CONDITION
NON.SUPERVISED
CIRCUIT
STYLE B/CLASS B
SUPERVISED CIRCUIT
(SEE NOTE)
NOTE:
For supervised circuits, see "Switch Terminal Connections" above. The Waterflow Alarm
Switch has two switches, one can be used to operale a central station, proprietary or remove
signaling unit, while the other contact is used to operate a local audible or visual annuncialor.
covER TAMPER SWTTCH (ULC ASSEMBLTES ONLY)
CONTACTS .. SPDT(FormC)
CONTACT RATING 3A @ 250 VAC
5A@ 125VAC
lmA@5VDCmin.
NO aNc
coM
CONTACTS SHOV\iN
WTH COVER IN PLACE
FIGURE 3
WIRING GUIDANCE
NO. DESCRIPTION
3/8" Copper Tubing,
2" (DN50) Manifolds
2-1i2" (DN65) and
3'(DN80) Manifolds
4" (DN100) and
6'(DN150) Manifolds
Qry. P/N
. 1 97't-12+0',1
. 1 S7't-124-02
. 1 971-124-03
NO. DESCRIPTION
2 Pressure Relief Valve,
1 75 psi, Nonadjustable3 90" Compression Fitting
Fitting. . .4 '1" x 112" Reducing Hex
Bushing .
Qry. P/N
. 1 198-066-00
.2 CH
.1 CH
1-112" (DN40) Manifold Only:
To install optional Pressure ReliefTrim on
a 1-112'(DN40) Manifold, a 1/2" NPT outlet
must be provided by the installer on the
system outlet piping, and a conneclion back
to the manifold drain trim must be fabri€ted
with installer supplied 3/8" copper tubing.
Discard unused trim components.
CH: Common Hardware
3 1/2'NPT
Outlet
lnstaller
Provided
System Outlet
3 4 Piping
lnstaller
Fabricated
3/8" Copper
Tubing
3"
(DN50), 2-112" {DN65),
{DN8o),4" (DN100}, or
6" (DN150) Manifold
3
Manifold
D€in Trim
1-112" (DN4o)
Manifold
FIGURE 4
OPTIONAL PRESSURE RELIEF VALVE
o
rt+-
Ei lr1
TFP962
Care and
Maintenanc'e
The following inspection procedure
must be performed as indicated, in ad-
dition to any specific requirements of
the NFPA, and any impairment must
be immediately corrected.
The owner is responsible for the in-
spection, testing, and maintenance of
their fire protection system and de-
vices in compliance with this docu-
ment, as well as with the applicable
standards of the National Fire Protec-
tion Association (e.9., NFPA 25), in
addition to the standards of any
authority having jurisdiction. The in-
stalling contractor or product manufac-
turer should be contacted relative to
any questions.
It is recommended that automatic
sprinkler systems be inspected,
tested, and maintained by a qualified
lnspection Service in accordance with
local requirements and/or national
codes.
itorEs
No attempt is to be made to repair any
Riser Manifold component in the field.
Only the pressure gauge, waterflow
alarm switch, or relief valve can be
replaced. If any other problems are
encountered the entire riser manifold
must be replaced.
The alarm/flow test procedure will re-
sult in operation of the associated
alarms. Consequently, notification
must be given to the owner and the fire
department, central station, or other
signal station to which the alarms are
connected, and notification must be
given to the building occupants.
Before closing a fire protection system
control valve for inspection or mainte-
nance work on the fire protection sys-
tem that it controls, permission to shut
down the effected fire protection sys-
tem must first be obtained from the
proper authorities and all personnel
who may be affected by this action
must be notified.
After placing a fire protection system
in service, notify the proper authorities
and advise those responsible for moni-
toring proprietary and/or central sta-
tion alarms.
Page 5 of 6
Alarm/Flow Test Procedure
Step 1. Place the test & drain Valve in
the "test" position.
Step 2. Fully open the drain valve.
Make certain that drainage water will
not cause any damage or injury.
Step 3. Verify operation of associated
alarms.
Step 4. Close the drain valve.
Step 5. Place the test & drain Valve in
the "drain" position.
Step 6. Verify that the residual (flow-
ing) pressure indicated by the pres-
sure gauge is no less that originally
recorded for the system when it was
first installed.
Step 7. Close the drain valve.
Step 8. Verify that the static (not flow-
ing) pressure indicated by the pres-
sure gauge is no less that originally
recorded for the system when it was
first installed.
Page 6 of 6
LimiJed
WarranJy
Products manufactured by Tyco Fire &
Building Products (TFBP) are war-
ranted solely to the original Buyer for
ten (10) years against defects in mate-
rial and workmanship when paid for
and properly installed and maintained
under normal use and service. This
warranty will expire ten (10) years
from date of shipment by TFBP. No
warranty is given for products or com-
ponents manufactured by companies
not affiliated by ownership with TFBP
or for products and components which
have been subject to misuse, improper
installation, corrosion, or which have
not been installed, maintained, modi-
fied or repaired in accordance with ap-
plicable Standards of the National Fire
Protection Association, and/or the
standards of any other Authorities
Having Jurisdiction. Materials found
by TFBP to be defective shall be either
repaired or replaced, at TFBP's sole
option. TFBP neither assumes, nor
authorizes any person to assume for it,
any other obligation in connection with
the sale of products or parts of prod-
ucts. TFBP shall not be responsible for
sprinkler system design errors or inac-
curate or incomplete information sup-
plied by Buyer or Buyer's repre-
sentatives.
ln no event shall TFBP be liable, in
contract, tort, strict liability or under
any other legal theory, for incidental,
indirect, special or consequential dam-
ages, including but not limited to labor
charges, regardless of whether TFBP
was informed about the possibility of
such damages, and in no event shall
TFBP's liability exceed an amount
equal to the sales price.
The foregoing warrantv is made in lieu
of anv ancl all other warranties ex-
press or implied. including warranties
of merchantability and fitness for a par-
ticular purpose.
This limited warranty sets forth the ex-
clusive remedy for claims based on
failure of or defect in products, materi-
als or components, whether the claim
is made in contract, tort, strict Iiability
or any other legal theory.
This warranty will apply to the full ex-
tent permitted by law. The invalidity, in
whole or part, of any portion of this
warranty will not affect the remainder.
Ordering
InformaJion
Riser Manifold:
Specify; Size (specify), Figure 513,
(specify connection type inlet x outlet)
Riser Manifold (specify - without or
with) a cover tamper switch for the
waterflow alarm switch, P/N (specify).
IVOIES
Orders for Figure 513 may be filled
with a Figure 13. The two assemblies
are completely interchangeable in
function, application, and end-to-end
laying length.
lf a ULC Listing is required, the Riser
Manifold must be ordered with a cover
tamper switch for the waterflow alarm
switch.
UL/ULC/FM Assomblies
With Cover Tampsr Switch
1-112 lnch (DN40)
MTx FT .
1-1l2 lnch (DN40)
MT x MT.
2 lnch (DN50)
GxG..
2-112 lnch (DN6s)
GxG..
3 lnch (DN80)
GxG..
4 lnch (DN100)
GxG..
6 lnch (DN150)
GxG..
PiN 4086
P/N 4087
P/N 4090
P/N 4091
P/N 4092
P/N 4095
P/N 4096
Without Cover Tamper Switch
1-1l2 lnch (DN40)
MTx FT .
1-112 lnch (DN40)
MT x MT.
2 lnch (DNso)
GxG..
2-112 lnch (DN65)
GxG..
3 lnch (DN80)
GxG..
4 lnch (DN100)
GxG..
6 lnch (DN150)
GxG..
P/N 4055
P/N 4056
P/N 4060
P/N 4061
P/N 4062
P/N 4065
P/N 4066
Optional Pressure Relief Valve:
Specify: Operational Pressure Relief
Valve and Trim for use with (specify
size) Figure 513 or 13 Series Riser
Manifold, P/N (specify).
TFP962
1-112" or 2"
2-112" ot 3"
4"016"...
P/N 4063
PtN 4072
P/N 4073
Replacement Parts:
Specify: (description) for use with Fig-
ure 513 or 13 Riser Manifold, P/N (Ref.
Figure 1 or 2, as applicable).
TYCO FIRE & BUILDING PRODUCTS,451 North Cannon Avenue, Lansdale, Pennsylvania 19446
tryc,n Fire & Suilding
Froducts
TechnicalServices: Tel: (800) 381-9312 / Fax: (800) 791-5500
Series TY-FRB - 2.8, 4.2, 5.6, and 8.O K-Jactor
Upright, PendenJ, and Recessed Pendent Sprinklers
Quick Respons@, Standard Coverage
General
Descript ion
The Series TY-FRB, 2.8,4.2,5.6, and
8.0 K-factor, Upright and Pendent
Sprinklers described in this data sheet
are quick response - standard cover-
age, decorative 3 mm glass bulb type
spray sprinklers designed for use in
light or ordinary hazard, commercial
occupancies such as banks, hotels,
shopping malls, etc.
The recessed version of the Series
TY-FRB Pendent Sprinkler, where ap-
plicable, is intended for use in areas
with a finished ceiling. lt uses either a
two-piece Style 10 (112 inch NPT) or
Style 40 (3/4 inch NPT) Recessed Es-
cutcheon with 112 inch (12,7 mm) of
recessed adjustment or up to 3/4 inch
(19,1 mm) of total adjustment from the
flush pendent position, or a two-piece
Style 20 (112inch NPT) or Style 30 (3/4
inch NPT) Recessed Escutcheon with
1/4 inch (6,4 mm) of recessed adjust-
ment or up lo 112 inch (12,7 mm) of
total adjustment from the flush pen-
dent position. The adjustment pro-
vided by the Recessed Escutcheon re-
duces the accuracy to which the fixed
pipe drops to the sprinklers must be
cut.
Corrosion resistant coatings, where
applicable, are utilized to extend the
life of copper alloy sprinklers beyond
that which would otherwise be ob-
IMPORTANT
Always refer to Technical Data
Sheet TFP700 for the'INSTALLER
WARNING' that provides cautions
with respect to handling and instal-
lation of sprinkler systems and com-
ponents. lmproper handling and in-
stallation can permanently damage
a sprinkler system or its compo-
nents and cause the sprinkler to fail
to operate in a fire situation or cause
it to operate prematurely.
tained when exposed to corrosive at-
mospheres. Although corrosion resis-
tant coated sprinklers have passed the
standard corrosion tests of the appli-
cable approval agencies, the testing is
not representative of all possible cor-
rosive atmospheres. Consequently, it
is recommended that the end user be
consulted with respect to the suitability
of these coatings for any given corro-
sive environment. The effects of ambi-
ent temperature, concentration of
chemicals, and gas/chemical velocity,
should be considered, as a minimum,
along with the corrosive nature of the
chemical to which the sprinklers will be
exposed.
An intermediate level versions of the
Series TY-FRB Pendent Sprinklers
are detailed in Technical Data Sheet
TFP356, and Sprinkler Guards are de-
tailed in Technical Data SheetTFPTS0
WARNINGS
The Series TY-FRB Sprinklers de-
scribed herein must be installed and
maintained in compliance with this
document, as well as with the applica-
ble standards of the National Fire Pro-
tection Association, in addition to the
standards of any other authorities hav-
ing jurisdiction. Failure to do so may
impair the pertormance of these de-
vices.
The owner is responsible for maintain-
ing their fire protection system and de-
vices in proper operating condition.
The installing contractor or sprinkler
manufacturer should be contacted
with any questions.
I
I
ModellSprinkler
Identificalion
Numbers
TY1l31 - Upright
TY1231 - Pendent
TY2131 -
TY2231 -
TY313r -
TY3231 -
TY4131 -
TY4231 -
2.8K,1/2"NPT
1/2"NPT
1/2"NPT
1/2"NPT
1/2"NPT
1/2"NPT
3/4"NPT
3/4"NPT
Upright
Pendent
Upright
Pendent
Upright
Pendent
2.
4.
4.
5.
5.
8.
8.
8K,
2K,
2K,
6K,
6K,
OK,
OK,
m-ffi":
'Wl
J&
ie _
,*
#H,s,
&::;:GEf:::Eisr
Page 1 of 1O APRIL,2006 TFPl71
Page 2 ol 10 TFP171
ESCUTCHEON
PLATE SEATING
SURFACE
7/16" (11,1 mm)
NOMINAL
MAKE-IN
SWLE 10 or 20
RECESSED
ESCUTCHEON SSU*
DEFLECTOR
\n" r'r'
NPT
2-114"
(57,2 mm)
1-9/16"
(3e,7 mm)
SSP DEFLECTOR *
PENDENT
1 - Frame
2 - Button
7116"
(11,1 mm)
NOMINAL
MAKE-IN
6
5
4
2
3
1
7
WRENCH
FLATS
2-3t16"
(55,6 mm)
1/2" NPT**
UPRIGHT
(73,0 mm) DlA.
RECESSED PENDENT
3 - Sealing 4 - Bulb 6 - Deflector * Temperature rating is indicated on deflector or adjacent toAssembly 5 - Compression 7 - Bushing orifiCe Seat On frame.screw **Pipe thread connections per ISO 7t1 canbe provided on
special request.
FIGURE 1
QUICK RESPOwSE SERTES TY-FRB UPRTGHT (TY1131) AND PENDENT (TY1231) SPRT TKLERS
2.8 K.FACTOR, 1/2 INCH NPT
CROSS SECTION
ESCUTCHEON
PLATE SEATING
SURFACE
7/16" (11,1 mm)
NOMINAL
MAKE-IN
STYLE l0 or20
RECESSED
ESCUTCHEON ssu*
DEFLECTOR
1n" t''"
NPT
o
2-3t16"
(55,6 mm)
1 - Frame
2 - Bution
7t16"
(11,1 mm)
NOMINAL
MAKE-IN
5
4
2
3
1
1-1t2"
(38,1 mm)
SSP DEFLECTOR*
PENDENT -
2-7t8" (73,0 mm) DlA.
RECESSED PENDENT
WRENCH
FLATS
2-3t16"
(55,6 mm)
1/2',NPT**
UPRIGHT
* Temperature rating is indicated on deflector or adjacent to
orifice seat on frame.
**Pipe thread connections per ISO 711 can be provided on
special request.
CROSS SECTION
3 - Sealing
Assembly
4 - Bulb
5 - Compression
Screw
6 - Deflector
FIGURE 2
QUICK RESPONSE SERTES TY-FRB UPRTGHT (TY2131) AND PENDENT (TY2231) SPRTwKLERS
4.2 K-FACTOR, 1/2 INCH NPT
TFP171 Page 3 of 1O
ESCUTCHEON
PLATE SEATING
SURFACE
7/16" (1'1,1 mm)
NOMINAL
MAKE.IN
STYLE 10 or20
RECESSED
ESCUTCHEON SSU*
DEFLECTOR
1/2" **
NPT
6*
2-3t16',
(55,6 mm)
1 - Frame
2 - Button
7t16"
(11,1 mm)
NOMINAL
MAKE-IN
5
4
2
3
1
1:v2"
(38,1 mm)
SSP DEFLECTOR*
PENDENT
(73,0 mm) DlA.
RECESSED PENDENT
2-3t't6"
(55,6 mm)WRENCH
FLATS
1/2" NPT**
UPRIGHT
* Temperature rating is indicated on deflector or adjacent to
orifice seat on frame.
**Pipe thread connections per ISO 7t| can be provided on
special request.
CROSS SECTION
3 - Sealing
Assembly
4 - Bulb
5 - Compression
Screw
6 - Deflector
FIGURE 3
QUICK RESPOruSE SER'ES TY-FRB UPRIGHT (TY3131) AND PENDENT (TY3231) SPR'NKLERS
5.6 K-FACTOR, 1/2 INCH NPT
ESCUTCHEON
PLATE SEATING
SURFACE
112" (12,7 mm)
NOMINAL
MAKE-IN
STYLE 30 or 40
RECESSED
ESCUTCHEON SSU*
DEFLECTOR
314" t"'
NPT
2-5t16"
(58,7 mm)
1 - Frame
2 - Button
1t2"
(12,7 mm)
NOMINAL
MAKE-IN
6*
5
4
2
1 -9/1 6"
(39,7 mm)
SSP DEFLECTOR*
PENDENT
* 2-718" (73,0 mm) DlA.
RECESSED PENDENT
2:U4"
7,2mm)(5WRENCH
FLATS 3
1
4 - Bulb
5 - Compression
FIGURE 4
QUTCK RESPONSE SERTES TY-FRB UPRTGHT (TY4131) AND PENDENT (TY4231) SPRT TKLERS
8.0 K-FACTOR, 3/4 INCH NPT
3 - Sealing
Assembly
6 - Deflector
3/4' NPT **
UPRIGHT CROSS SECTION
* Temperature rating is indicated on deflector or adjacent to
orifice seat on frame.
**Pipe thread connections per ISO 7t1 can be provided on
special request,
Screw
SPRINKLER FINISH (See Note 7)
K TYPE TEMP BULB
LIQUID
NATURAL
BRASS
CHROME
PLATED
wHITE***
POLYESTER
2.8
1t2"
NPT
PENDENT
(TY123r)
and
UPRIGHT
(w1131)
135"F157"C Orange
1,2,3,5
1 55'F/68'C Red
175'F179'C Yellow
200'F/93'C Green
286"Ft141'C Blue
RECESSED
PENDENT
(TY123rr
Figuro 5
135"Ft57"C Orange
't,2,5
1 55'F/68'C Red
175"F179"C Yellow
200'F/93'C Green
RECESSED
PENDENT
(TY1231r*
Figure 6
't35'Ft57'C Orange
1 55'F/68'C Red
175"Ft79'C Yellow
200'F/93'C Green
4.2
'U2"
NPT
PENDENT
(rY223{)
and
UPRIGHT
(w2131)
1 35'F/57'C Orange
't,2
1 55'F/68'C Red
175"Ft79"C Yellow
200'F/93"C Green
286"Ft141'C Blue
RECESSED
PENDENT
(TY22311*
Figure 7
135"Ft57'C Orange
1 55"F/68'C Red
175"F179"C Yellow
200'F/93'C Green
RECESSED
PENDENT
(TY22311**
Figure 8
1 35'F/57'C Orange
1 55'F/68'C Red
175"Ft79"C Yellow
200'Flg3"C Green
Page 4 of 1O
NOTES:
1. Listed by Underwriters Laboratories, lnc. (UL) as Quick Response Sprinklers.
2. Listed by Underwriters Laboratories, lnc. for use in Canada (C-UL) as Quick Re-
sponse Sprinklers.
3. Approved by Factory Mutual Research Corporation (FM) as Quick Response Sprin-
klers.
5. Approved by the City of New York under MEA 354-01-E.
7. \Mere Polyester Coated Sprinklers are noted to be UL and C-UL Listed, the sprin-
klers are UL and C-UL Listed as Corrosion Resistant Sprinklers.* lnstalled with Style 10 (112" NPT) or Style 40 (3/4" NPT) 3/4" Total Adjustment
Recessed Escutcheon, as applicable.** lnstalled with Style 20 (112" NPT) or Style 30 (3/4" NPT) 'l12" Tolal Adjustment
Recessed Escutcheon, as applicable.*** Frame and Deflector only. Listings and approvals apply to color (Special Order).
N/A: Not Available
TABLE A
LABORATORY LISTINGS AND APPROVALS
2.8 AND 4.2 K-FACTOR SPR''VKIERS
TFPl71
Technical
Data
Approvals
UL and C-UL
FM, LPCB, and NYC Approved.
(Refer to Table A and B for complete
approval information including corro-
sion resistant status. )
Maximum Working Pressure
Refer to Table C.
Discharge Coefficient
K= 2.8 GPM/psitrz (40,3 LPM/bartrz)
K= 4.2 GPM/psitrz (60,5 LPM/bartrz;
K = 5.6 GPM/psitrz (80,6 LPM/bartrz)
K = 8.0 GPM/psitiz (115,2LPMlbartrz)
Temperature Ratings
Refer to Table A and B
Finishes
Sprinkler: Refer to Table A and B.
Recessed Escutcheon: White Coated,
Chrome Plated, or Brass Plated.
Physical CharacteristicsFrame BronzeButton Brass/Copper
Sealing Assembly
Beryllium Nickel w/TeflonfBulb Glass
Compression Screw . BronzeDeflector . Copper/Bronze
Bushing (K=2.8) Bronze
Operation
The glass Bulb contains a fluid which
expands when exposed to heat. When
the rated temperature is reached, the
fluid expands sufficiently to shatter the
glass Bulb, allowing the sprinkler to
activate and water to flow.
Design
Criteria
The Series TY-FRB Pendent and Up-
right Sprinklers are intended for fire
protection systems designed in ac-
cordance with the standard installation
rules recognized by the applicable
Listing or Approval agency (e.9., UL
Listing is based on the requirements of
NFPA 13, and FM Approval is based
on the requirements of FM's Loss Pre-
vention Data Sheets ).the Style
Escutch-
used for
v
(6
Eo!t(s
F
c)
c)
,9(')
c)E,
Co(L
fo
.F
sEP 2 8 2007
CITY OF PORT TOWNSEND
DSO
be
SPRINKLER FINISH (See Note 8)
K TYPE TEMP.BULB
LIQUID
NATURAL
BRASS
CHROME
PLATED
WHITE**
POLYESTER
LEAD
COATED
5.6
1t2"
NPT
PENDENT
(TY323{)
and
UPRIGHT
(TY313{)
1 35'F/57'C Orange
1,2,3,4,5,6,7 1,2,3, s
155'F/68'C Red
't75"Ft79"C Yellow
200'F/93'C Green
286"Ft141"C Blue
RECESSED
PENDENT
(TY323rr
Figure 9
135'F/57'C Orange
1,2, 4, 5 N/A
155'F/68'C Red
175'Ft79"C Yellow
200"F/93'C Green
RECESSED
PENDENT
(w3231r*
Figure 10
135'F/57'C Orange
1 ,2,3, 4, 5 1,2,4,5 N/A
1 55"F/68'C Red
175'Ft79"C Yellow
200'F/93'C Green
8.0
3t4"
NPT
PENDENT
(TY4231)
and
UPRIGHT
(TY4{31)
1 3s"F/57'C Orange
1 ,2,3, 4, 5,6,7
1.2.5
1 55'F/68'C Red
175'Ft79"C Yellow
200"F/93'C Green
286"Ft141"C Blue
RECESSED
PENDENT
(TY4231F
Figure l1
1 35'F/57'C Green
1,2, 4, 5 N/A
I 55"F/68'C Orange
175"F179"C Red
200'F/93'C Yellow
RECESSED
PENDENT
(w4231r-
Figure 12
1 35'F/57'C Orange
1,2,3,4,5 N/A
1 55'F/68'C Red
175"Ft79"C Yellow
200"F/93'C Green
TFPl71 Page 5 of 10
NOTES:
1. Listed by Underwriters Laboratories, lnc. (UL) as Quick Response Sprinklers.
2. Listed by Underwriters Laboratories, lnc. for use in Canada (C-UL) as Quick Response Sprinklers-
3. Approved by Factory Mutual Research Corporation (FM) as Quick Response Sprinklers.
4. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 007U04) as Quick Response Sprinklers; however, the
LPCB does not rate the thermal sensitivity of recessed sprinklers.
5. Approved by the City of New York under MEA 354-01-E.
6. VdS Approved (For details contact Tyco Fire & Building Products, Enschede, Netherlands, Tel. 31-53-428-44441Fax31-53-428-3377\
7. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 094a/06) as Quick Response Sprinklers.
8. Where Polyester Coated and Lead Coated Sprinklers are noted to be UL and C-UL Listed, the sprinklers are UL and C-UL Listed as
Corrosion Resislant Sprinklers. Where Lead Coated Sprinklers are noted to be FM Approved, the sprinklers are FM Approved as a
Corrosion Resistant Sprinklers." lnstalled with Style 10 (112" NPT) or Style 40 (3/4' NPT) 3/4" Total Adjustment Recessed Escutcheon, as applicable.** lnstalled with Style 20 (112" NPT) or Style 30 (3/4" NPT) 112" Tolal Adjustment Recessed Escutcheon, as applicable.*** Frame and Deflector only. Listings and approvals apply to color (Special Order).
N/A: Not Available
TABLE B
LA BO RATO RY L'S T'NGS A N D A P P ROVA LS
5.6 AND 8.0 K-FACTOR SPR''VKLERS
SPRINKLER FINISH
K TYPE NATURAL
BRASS
CHROME
PLATED
I wure
leor-vesren
LEAD
COATED
2.8
1t2"
NPT
PENDENT (rY3231)
and
UPRTGHT (TY3131)175 PSr (12,1 BAR)N/A
RECESSED PENDENT
(TY323)
4.2
3t4"
NPT
PENDENT (TY4231)
and
UPRTGHT (TY4131)175 PSr (12,1 BAR)N/A
RECESSED PENDENT
(TY4231)
5.6
1t2"
NPT
PENDENT (TY3231)
and
UPRTGHT (TY3131)
250 PSr (17,2 BAR)
OR
175 PSr (12,1 BAR)
(sEE NOrE 1)
175 PSI(12,1 BAR)
RECESSED PENDENT
(TY323)N/A
8.0
314"
NPT
PENDENT (TY4231)
and
UPRTGHT (TY4131)
175 PSr (12,1 BAR)175 PSr (12,1 BAR)
RECESSED PENDENT
{JY4231)N/A
Page 6 of 1O TFPl71
NOTES:
1. The maximum working pressure of 250 psi (17,2 bat) only applies to the Listing by Underwriters Laboratories lnc. (UL); the Listing by
Underwriters Laboratories, lnc. for use in Canada (C-UL); and , the Approval by the City of New York.
TABLE C, MAXIMUM WORKING PRESSURE
InsJaIIaJion
The Series TY-FRB Sprinklers must
be installed in accordance with the fol-
lowing instructions:
NOIES
Do not install any bulb type sprinkler if
the bulb is cracked or there is a loss of
liquid from the bulb. With the sprinkler
held horizontally, a small air bubble
should be present. The diameter of the
air bubble is approximately 1/16 inch
(1,6 mm) for the 135"F/57"C to 3/32
inch (2,4 mm) for the 286"F/141"C
temperature ratings.
A leaktight 1/2 inch NPT sprinkler joint
should be obtained with a torque of 7
to 14 ft.lbs. (9,5 to 19,0 Nm} A maxi-
mum of 21 ft. lbs. (28,5 Nm) of torque
may be used to install sprinklers with
1/2 NPT connections. A leak tight 3/4
inch NPT sprinkler joint should be ob-
tained with a torque of 10 to 20 tt.lbs.
(13,4 to 26,8 Nm). A maximum of 30
ft.lbs. (40,7 Nm) of torque is to be used
to install sprinklers with 3/4 NPT con-
nections. Higher levels of torque may
distort the sprinkler inlet and cause
Ieakage or impairment of the sprinkler.
Do not aftempt to make-up for insuffi-
cient adjustment in the escutcheon
plate by under- or over-tightening the
sprinkler. Readjust the position of the
sprinkler fitting to suit.
The Series TY-FRB Pendent and Up-
right Sprinklers must be installed in
accordance with the following instruc-
tions.
Step 1. Pendent sprinklers are to be
installed in the pendent position, and
upright sprinklers are to be installed in
the upright position.
Step 2. With pipe thread sealant ap-
plied to the pipe threads, hand tighten
the sprinkler into the sprinkler fitting.
Step 3. Tighten the sprinkler into the
sprinkler fitting using only the W-Type
6 Sprinkler Wrench (Ref. Figure 13).
With reference to Figures 1, 2, 3, and
4, the W-Type 6 Sprinkler Wrench is to
be applied to the sprinkler wrench
flats.
The Series TY-FRB Recessed Pen-
dent Sprinklers must be installed in
accordance with the following instruc-
tions.
Step A. After installing the Style 10.
20, 30, or 40 Mounting Plate, as appli-
cable, over the sprinkler threads and
with pipe thread sealant applied to the
pipe threads, hand tighten the sprin-
kler into the sprinkler fitting.
Step B. Tighten the sprinkler into the
sprinkler fitting using only the W-Type
7 Recessed Sprinkler Wrench (Ref.
Figure 14). With reference to Figure 1 ,
2, 3, and 4, the W-Type 7 Recessed
Sprinkler Wrench is to be applied to
the sprinkler wrench flats.
Step C. After the ceiling has been in-
stalled or the finish coat has been ap-
plied, slide on the Style 10, 20, 30, or
40 Closure over the Series TY-FRB
Sprinkler and push the Closure over
the Mounting Plate until its flange
comes in contact with the ceiling.
5181114"
(15,916,4 mm)
FACE OF
SPRINKLER
FITTING
2-7t8" DtA.
(73,0 mm)
2-114" DtA.
(s7,2 mm)
1/4" (6,4 mm)
MOUNTING
PLATE
1/8'
(3,2 mm)
314"
MOUNTING
SURFACE
CLOSURE SERIES
TY-FRB
't-5/16'
13/16" (20,6 mm)
FIGURE 5
SER'ES TY.FRB RECESSED PENDENT
WITH TWO-PIECE 3/4INCH TOTAL ADJUSTMENT
STYLE 10 RECESSED ESCUTCHEON
2.8 K-FACTOR, 1/2 INCH NPT
'l TFPl71
Care and
MainJenance
The Series TY-FRB Sprinklers must
be maintained and serviced in accord-
ance with the following instructions:
A'OIES
Before closing a fire protection system
main control valve far maintenance
work on the fire protection system that
it controls, permission to shut down the
affected fire protection system must be
obtained from the proper authorities
and all personnel who may be affected
by this action must be notified.
The owner must assure that the sprin-
klers are not used for hanging of any
objects; otherwise, non-operation in
the event of a fire or inadvertent opera-
tion may result.
Absence of an escutcheon, which is
used to cover a clearance hole, may
delay the time to sprinkler operation in
a fire situation.
Sprinklers that are.found to be leaking
or exhibiting visible signs of corrosion
must be replaced.
Automatic sprinklers must never be
painted, plated, coated or otherwise
altered after leaving the factory. Modi-
fied sprinklers must be replaced.
Sprinklers that have been exposed to
corrosive products of combustion, but
have not operated, should be replaced
if they cannot be completely cleaned
by wiping the sprinkler with a cloth or
Page 7 of 10
by brushing it with a soft bristle brush.
Care must be exercised to avoid dam-
age to the sprinklers - before, during,
and after installation. Sprinklers dam-
aged by dropping, striking, wrench
twisUslippage, or the like, must be re-
placed. Also, replace any sprinkler
that has a cracked bulb orthat has lost
liquid from its bulb. (Ref. lnstallation
Section).
Frequent visual inspections are rec-
ommended to be initially performed for
corrosion resistant coated sprinklers,
after the installation has been com-
pleted, to verify the integrity of the cor-
rosion resistant coating. Thereafter,
annual inspections per NFPA 25
should suffice; however, instead of in-
specting from the floor level, a random
1121118"
(12,7t3,2 mm)
2-7t8" DlA.
(73,0 mm)
2-114" DlA.
(57,2 mm)
112"
'1l4" (6,4 mm)
MOUNTING
7
FACE OF
SPRINKLER
FITTING
PLATE
(3,2 mm)
MOUNTING
SURFACE
CLOSURE SERIES
TY-FRB
'I -5/'16',
1-1116" (27,0 mm)
FIGURE 6
SER'ES TY,FRB RECESSED PENDENT
WITH TWO-PIECE 1/2INCH TOTAL ADJUSTMENT
STYLE 20 RECESSED ESCUTCHEON
2.8 K-FACTOR, 1/2 INCH NPT
1/8"
518t114"
('t5,9*6,4 mm)
FACE OF
SPRINKLER
FITTING
2-7t8" DtA.
(73,0 mm)
2-1t4',DtA.
(57,2 mm)
3t4',
1/4" (6,4 mm)
MOUNTING
PLATE
118'
(3,2 mm)
1
MOUNTING
SURFACE
CLOSURE SERIES
ry-FRB
1-1t4"
3/4" (19,1 mm)
FIGURE 7
SER'ES TY-FRB RECESSED PENDENT
WITH TWO-PIECE 314 INCH TOTAL ADJUSTMENT
STYLE 10 RECESSED ESCUTCHEON
4.2 K-FACTOR, 1/2 INCH NPT
112r.118"
(12,713,2 mm)
1t2"
1/4" (6,4 mm)
MOUNTING
PLATE
1la"
(3,2
MOUNTING
SURFACE
CLOSURE SERIES
TY-FRB
1-1t4"
1" (25,4 mm)
FIGURE 8
SER'ES TY.FRB RECESSED PENDENT
WTH TWO.PIECE 1/2INCH TOTAL ADJUSTMENT
STYLE 20 RECESSED ESCUTCHEON
4.2 K-FACTOR, 1/2 INCH NPT
2-7t8" DlA.
(73,0 mm)
2-1t4" DtA.
(57,2 rnm)
7
FACE OF
SPRINKLER
FITTING
5tgt'U4"
(15,916,4 mm)
FACE OF
SPRINKLER
FITTING
2-7t8" DtA.
(73,0 mm)
2-1t4" DlA.
(57,2 mm)
1/4" (6,4 mm)
MOUNTING
PLATE
118"
(3,2 mm)
314"1
MOUNTING
SURFACE
CLOSURE SERIES
ry-FRB
1-114",8
3/4" (19,1 mm)
FIGURE 9
SER'ES TY.FRB RECESSED PENDENT
WITH TWO-PIECE SI4INCH TOTAL ADJUSTMENT
STYLE 1O RECESSED ESCUTCHEON
5.6 K-FACTOR, 1/2 INCH NPT
_l Page 8 of 1O
sampling of close-up visual inspec-
tions should be made, so as to better
determine the exact sprinkler condi-
tion and the long term integrity of the
corrosion resistant coating, as it may
be affected by the corrosive conditions
present.
The owner is responsible for the in-
spection, testing, and maintenance of
their fire protection system and de-
vices in compliance with this docu-
ment, as well as with the applicable
standards of the National Fire Protec-
tion Association (e.9., NFPA 25), in
addition to the standards of any other
authorities having jurisdiction. The in-
stalling contractor or sprinkler manu-
facturer should be contacted relative
to any questions.
It is recommended that automatic
sprinkler systems be inspected,
tested, and maintained by a qualified
lnspection Service in accordance with
local requirements and/or national
codes.
TFPl71
2-7t8" DtA.
1t2+.1t8"
(12,713,2 mm)
(73,0 mm)112"12,7
FACE OF
SPRINKLER
FITTING
2-1t4',DlA.
(57,2 mm)
PLATE
MOUNTING
SURFACE
CLOSURE SERIES
TY-FRB
1-114"1,8
1" (25,4 mm)
FIGURE 1O
SER'ES TY.FRB RECESSED PENDENT
WTH TWO-PIECE 1/2 INCH TOTAL ADJUSTMENT
STYLE 20 RECESSED ESCUTCHEON
5.6 K-FACTOR, 1/2 INCH NPT
1/4" (6,4 mm)
MOUNTING
1ta"
(3,2
5t8t1t4',
2-7t5" DtA.
(73,0 mm)
2-1t4" DtA.
(57,2 mm)
314 1
(15,9+6,4 mm)
FACE OF
SPRINKLER
FITTING
PLATE
1t8"
(3,2 mm)
MOUNTING
SURFACE
CLOSURE SERIES 1-5l16"
TY-FRB 13i16,,(20,6 mm)
FIGURE 11
SER'ES TY-FRB RECESSED PENDENT
WITH TWO-PIECE 3/4INCH TOTAL ADJUSTMENT
STYLE 40 RECESSED ESCUTCHEON
8.0 K-FACTOR, 3I4 INCH NPT
1/4" (6,4 mm)
MOUNTING
112t118"
(12,7*3,2 mm)
2-7t8" DlA.
(73,0 mm)
2-1t4" DtA.
(57,2 mm)
1t2"2,7
1/4" (6,4 mm)
MOUNTINGFACE OF
SPRINKLER
FIfiING
PLATE
(3,2 mm)
MOUNTING
SURFACE
CLOSURE SERIES 1-5l16"
TY-FRB t1t16" (27,0 mm;
FIGURE 12
SER'ES TY.FRB RECESSED PENDENT
WITH TWO-PIECE lI2INCH TOTAL ADJUSTMENT
STYLE 30 RECESSED ESCUTCHEON
8.0 K-FACTOR, 3/4 INCH NPT
1/8"
WRENCH RECESS
(END'A'USED FOR
1/2' NPT MODELS)
WRENCH RECESS
(END'B'' USED FOR
3/4' NPT MODELS)
FIGURE 13
W-TYPE 6 SPRINKLER
WRENCH
WRENCH
RECESS
PUSH WRENCH
IN TO ENSURE
ENGAGEMENT
WTH SPRINKLER
WRENCHINGAREA
FIGURE 14
W-TYPE 7 RECESSED
SPR''VKIER WRENCH
TFPl71
P/N57-XXX-X-XXX
TABLE D
PART NUMBER SELECTION
SER'ES TY-FRB PENDENT AND UPRIGHT SPRINKLERS
Page 9 of 10
* Eastern Hemisphere sales only.
MODEUSIN
330 2.8K UPRTGHT (1/2"NPr)TY1 131
331 2.8K PENDENT (1/2"NPT)TY't231
340 4.2K UPRIGHT (1/2"NPT)TY2131
341 4.2K PENDENT (1/2"NPT)TY2231
370 5.6K UPRTGHT (1/2"NPT)w3131
371 5.6K PENDENT (1/2'NPT)ry3231
390 8"0K UPRTGHT (3/4"NPT)TY4131
391 8.0K PENDENT (3/4"NPT)rY4231
TEMPERATURE
RATING
135 135'F/57'C
155 155'F/68'C
175 175"Fn9"C
200 200'F/93'C
286 286"Ft141'C
SPRINKLER
1 NATURAL BRASS
4 WHITE POLYESTER
3 wHrTE (RA19010)"
I CHROME PLATED
7 LEAD COATED
LimiJed
Warranty
Products manufactured by Tyco Fire &
Building Products (TFBP) are war-
ranted solely to the original Buyer for
ten (10) years against defects in mate-
rial and workmanship when paid for
and properly installed and maintained
under normal use and service. This
warranty will expire ten (10) years
from date of shipment by TFBP. No
warranty is given for products or com-
ponents manufactured by companies
not affiliated by ownership with TFBP
or for products and components which
have been subject to misuse, improper
installation, corrosion, or which have
not been installed, maintained, modi-
fied or repaired in accordance with ap-
plicable Standards of the National Fire
Protection Association, and/or the
standards of any other Authorities
Having Jurisdiction. Materials found
by TFBP to be defective shall be either
repaired or replaced, at TFBP's sole
option. TFBP neither assumes, nor
authorizes any person to assume for it,
any other obligation in connection with
the sale of products or parts of prod-
ucts. TFBP shall not be responsible for
sprinkler system design errors or inac-
curate or incomplete information sup-plied by Buyer or Buyer's repre-
sentatives.
ln no event shall TFBP be liable, in
contract, tort, strict liability or under
any other legal theory, for incidental,
indirect, special or consequential dam-
ages, including but not limited to labor
charges, regardless of whether TFBP
was informed about the possibility of
such damages, and in no event shall
TFBP's liability exceed an amount
equal to the sales price.
The foregoing warranty is made in lieu
of any and all other warranties. ex-
press or implied. including warranties
of merchantability and fitness for a par-
ticular purpgse.
This limited warranty sets forth the ex-
clusive remedy for claims based on
failure of or defect in products, materi-
als or components, whether the claim
is made in contract, tort, strict liability
or any other legal theory.
This warranty will apply to the full ex-
tent permitted by law. The invalidity, in
whole or part, of any portion of this
warranty will not atfect the remainder.
Ordering
Procedure
When placing an order, indicate the
full product name. Refer to the Price
List for complete listing of Part Num-
bers.
Contact your local distributor for avail-
ability.
Sprinkler Assemblies with NPT
Thread Connections:
Specify: (Specify Model/SlN), Quick
Response, (specify K-factor), (specify
temperature rating), Series TY-FRB
(specify Pendent or Upright) Sprinkler
with (specify type of finish or coating),
P/N (specify from Table D).
Recessed Escutcheon:
Specify: Style (10, 20, 30, or 40) Re-
cessed Escutcheon with (specify.) fin-
ish, P/N (specify.).
* Refer to Technical Data Sheet fFP770.
Sprinkler Wrench:
Specify: W-Type 6 Sprinkler Wrench,
P/N 56-000-6-387.
Specify: W-Type 7 Sprinkler Wrench,
P/N 56-850-4-001.
Page 1O of 10 TFPl71
TYCO FIRE & BUILDING PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19446