HomeMy WebLinkAboutBLD07-059)
*i. ,.'
I
)ll
BUILDINGPERMIT
City of Port Townsend
Development Services Department
250 Madison Street, Suite 3, Port Townsend, WA 98368
(360)379-s09s
Project Information
Permit Type Residential - Single Family - New
Site Address 2249 HIGHLAND LOOP
Project Description
New single-family home with attached garage
Permit #
Project Name
Parcel #
BLD07-059
955900044
Names Associated with this Project
Type Name
Applicant Biram Marianne
Owner Biram Marianne
Contractor Millennium One Homes
Contractor Millennium One Homes
Contact Phone #
License
Type License # Exp Date
Todd Eskelin
Todd Eskelin
(360) 385-4141
(360) 385-4141
CITY
STATE
3547 12t3U2007
MILLEOHO rO\ 07 I t3 I 2007
Call 385-2294 by 3:00pm for next day inspection.
Permits expire 180 days from issuance if work is not commenced, or if work is suspended for a period of 180
days. Work is verffied by obtaining a valid inspection.
The granting of this permit shall not be construed as approval to violate any provisions of the PTMC or other laws or regulations. I certify
that the information provided as a part of the application for this permit is true and accurate to the best of my knowledge. I furttrer certify
that I am the owner ofthe property or authorized agent ofthe owner.
Datelssued: 04/11,/200'7
lssuedBy: PWESTERFIELD
Print Name o d-J D sk fr t^
BUILDINGPERMIT
City of Port Townsend
Development Services Department
250 Madison Street, Suite 3, Port Torvnsend, WA 98368
(360)379-s09s
Project Information
Permit Type Residential - Single Family - New
Site Address 2249 HIGHLAND LOOP
Project Description
New single-family home with attached garage
Permit #
Project Name
Parcel #
BLD07-0s9
955900044
Fee Information Project Details
Decks - Residential
Decks - Residential (Covered)
Dwellings - Type V Wood Frame
Private Garages - Wood Frame
Project Valuation
Site Address Fee
Building Permit Fee
Energy Code Fee - New Single
FamilyUnit
Mechanical Permit Fee per Dwelling
Unit - New Residential
Plan Review Fee
Plumbing Permit Fee per Dwelling
Unit - New Residential
State Building Code Council Fee
Technology Fee for Building Permit
Record Retention Fee for Building
Permit
Hamilton Heights Recreation Fee
Hamilton Heights Transportation Fee
$178.033.71
3.00
7,436.15
100.00
60 SQFT
ss SQFT
1,721 SQFT
528 SQFT
150.00
933.50
150.00
4.50
28.72
10.00
200.00
156.00
Total f,'ees $3,171.87
Call 385-2294 by 3:00pm for next day inspection.
Permits expire 180 days from issuance if work is not commenced, or if work is suspended for a period of 180
days. Work is verified by obtaining a valid inspection.
The granting of this permit shall not be construed as approval to violate any provisions of the PTMC or other laws or regulations. I certifl,
that the information provided as a part of the application for this permit is true and accurate to the best of my knowledge. I further certifu
that I am the owner ofthe property or authorized agent ofthe owner.
Datelssued: 04/1,1/2007
IssuedBy: PWBSTERFIBLD
Print Name
CO
N
S
T
R
U
C
T
I
O
N
PR
O
G
R
E
S
S
RE
C
O
R
I
)
CI
T
Y
OF
PO
R
T
TO
W
N
S
E
N
D
De
v
e
l
o
p
m
e
n
t
Se
r
v
i
c
e
s
De
p
a
r
t
m
e
n
t
25
0
Ma
d
i
s
o
n
St
r
e
e
t
.
Su
i
t
e
3.
Po
r
t
To
w
n
s
e
n
d
.
WA
98
3
6
8
PO
S
T
TH
I
S
CA
R
D
IN
A
SA
F
E
CO
N
S
P
I
G
U
O
U
S
L(
r
c
A
T
O
N
.
PL
E
A
S
E
DO
NO
T
RE
M
O
V
E
TH
I
S
NO
N
C
E
UN
T
I
L
AL
L
RE
Q
U
I
R
E
D
IN
S
P
E
C
T
I
O
N
S
AR
E
MA
D
E
AN
D
SI
G
N
E
D
OFF
BY
TH
E
AP
P
R
O
P
R
I
A
T
E
AU
T
H
O
R
I
T
Y
AN
D
TH
E
BU
I
L
D
I
N
G
IS
AP
P
R
O
V
E
D
FO
R
OC
C
U
P
A
N
C
Y
.
ST
A
M
P
E
D
AP
P
R
O
V
E
D
PL
A
N
S
MU
S
T
BE
AV
A
I
L
A
B
L
E
ON
TH
E
JO
B
S
I
T
E
PA
R
C
E
L
NO
.
95
5
9
0
0
0
4
4
PE
R
M
I
T
NO
.
BL
D
0
7
-
0
5
9
IS
S
U
E
D
DA
T
E
O4
I
1
1
I
2
O
O
7
D(
P
I
R
A
T
I
O
N
DATE 1010812007
AD
D
R
E
S
S
22
4
9
HI
G
H
L
A
N
D
LO
O
P
CO
N
S
T
R
U
C
T
I
O
N
TY
P
E
V-
B
OCCUPANT LOAD
OW
N
E
R
BI
R
A
I
\
4
I\
4
A
R
I
A
N
N
E
PR
O
J
E
C
T
DE
S
C
R
I
P
T
I
O
N
Ne
w
si
n
g
l
e
-
f
a
m
i
l
y
h
o
m
e
wi
t
h
at
t
a
c
h
e
d
garage
CO
N
T
R
A
C
T
O
R
MI
L
L
E
N
N
I
U
M
ON
E
HO
M
E
S
LE
N
D
E
R
IN
S
P
E
C
T
I
O
N
IN
S
P
DA
T
E
CO
M
M
E
N
T
S
IN
S
P
E
C
T
I
O
N
IN
S
P
DA
T
E
COMMENTS
,
Ns
p
Ec
r
r
o
N
*=
o
,
=,
13
'
f
f
i
S
Y
='
T
S
ff
i
:o
'
?
l
'
H
'
#
h
[l
'
l
'
"
'
:
t
f
f
ik
'
DA
y
,
Ns
p
Ec
r
r
o
N
'*
^
4-
X
R
FI
N
A
L
BU
I
L
D
I
N
G
TE
S
C
TE
S
C
FO
O
T
I
N
G
FO
U
N
D
A
T
I
O
N
WA
L
L
Fo
u
n
d
a
t
i
o
n
dr
a
i
n
SL
A
B
FL
O
O
R
FR
A
M
I
N
G
FR
A
M
I
N
G
PL
U
M
B
I
N
G
PL
U
M
B
I
N
G
WT
R
PI
P
I
N
ME
C
H
A
N
I
C
A
L
SH
E
A
R
W
A
L
L
IN
S
U
I
.
A
T
I
O
N
GW
B
RO
O
F
TI
A
I
L
I
N
G
MI
S
C
E
L
L
A
N
E
O
U
S
Receipt Number:
9.,f.:s04$:iii:i:!:itiii:iiiiiiiiiiliiiiiiii
BLD07-059
BLD07-059
BLDOT-059
BLD07-059
BLD07-059
BLD07-059
BLD07-059
BLD07-059
BLD07-059
BLD07-059
BLD07-059
955900044
955900044
955900044
955900044
955900044
955900044
955900044
955900044
95s900044
95s900044
955900044
Plan Review Fee
Technology Fee for Building Permit
Energy Code Fee - New Single Fami
State Building Gode Council Fee
Plumbing Permit Fee per Drirrelling L
Mechanical Permit Fee per t)vvelling
Building Perm it Fee
Record Retention Fee for Building P
Site Address Fee
llamilton Heights Recreation Fee
Flam ilton Heights Transportation Fe
$933.50
$28.72
$100.00
$4.50
$150.00
$150.00
$1,€6.15
$10.00
$3.00
$200.00
$156.00
Tolal
$783.50
$28.72
$100.00
$4.50
$150.00
$150.00
$1,1li}6.15
$10.00
$3'oo
$200.00
$156.00
$0.00
$o.oo
$0.00
$0.00
$o.oo
$0.00
$0.00
$0.00
$o.oo
$0.00
$0.00
$3,021.87
07-0237 0312112007 Plan Review Fee $150.00 BLDOT-059
CHECK 6108 $ 3,02'1.87
Total $3,021.87
genpntrreceipts Page 1 of 1
.1
,l
,-.-\ CITY OF PORT TOWNSENDD. ILOPMENT SERVICES DEPARTMENT .]
City Hall,250 Madison Stree! Suite 3
Port Townsend, WA 98369
Phone: 360-379-5095 Fax360-344-4619
RESIDENTIAL BUILDING PERMIT APPLICATION
NEW CONSTRUCTION, REMODELS, & ADDITIONS
144Property Owner's Name(s)
Address 8'? 3 T
City,State,Zip u)?bE
Phone V1q- S:o !.Permit No.
Street Address Loog$t
ZonngDistrict ooo t-l \sParcel # OOO
l\arh, tlu" t\Lot(s) {+ t_\Legal Description; Addition Block
I\\ i [tenn,un.. 0ne.lkxy\e s,rl-.11c-.General Contractor's Name
l/a.n ouMailing Address r +
Phone jEt-q/Vl CellPhone 3o l- 1? t 3
State License Number VUT L | € O flotoY1a City Business License Number
Authorized Representative/Contact Person :E-s ke Phone: 3bo 33f 'r U,rODD (li
Estimated Value of construction $1f rav->/ f.uuz,at B4rr/tFinanced
j/ts/oz Date Work is to be Completed t / tf / o1Date Work is to Begin
Scope of Work:
Please check all items that apply for the type of building permit you are requesting:
t-?1 17
Floor Area: the proposed structure is to be used for:
New House Addition
New Garage qf-arport Repair/Remodel Garage
odel House Accessory Dwelling Unit
Manufactured Home Other (please describe):
Finished Heated Space sq. ft:l1 zr 5oGarage sq. ft:
Unfurished Heated Space sq ft:ft:Carport
Unhnished Basement ft:Porches sq. ft:
Semi-Finished Basement sq ft Decks sq. ft:
Storage sq. ft:Other (please describe)1
P:\DSD\Forms\Building FormsWpptication-Residential Building permit.doc Page 1 of2 3
l. Thetotal area ofthe property in square feet: 3 J ? {
2. The total area covered by existing and proposed structures in square feet:
(total ground coverage from the outside ofwalls or supporting members)
ztzz f
Percentageoflotcoverage: (2+l) a 5' VS-lo
CITY OF PORT TOWNSEND RESIDENTIAL BUILDING PERMIT APPLICATION
NEW CONSTRUCTION, REMODELS, & ADDITIONS
Site Information:
Impervious Surfaces:
Please provide the square footage oftheroof.area ofthe proposed and existingstructures, and the square footage ofthe total area
covered by porches, walkways, patios and driveways. Do not include decks allowing drainage to earth below.
*lf total impervious surface is equal to or greater than 40o/o of the lot area, you must submit a written stormwater plan to address run
off.
Please check which plans you are submitting with this application (2 sets needed):
proposedHouse Roofrrint "{trt
I .€#ffi *Existing House Rooforint sq. ft:
Proposed Garage Roofprint sq. ft: sza Existing Garage Rooforint sq. ft:
Proposed PorchL/Walkway sq. ft:Existing Porch/Walkway sq. ft:,/t
Proposed Driveways sq. ft:35? sp Existing Driveways sq. ft:r/
Other (describe)Other (describe)
Total Proposed Impervious sq. ft: Z10 "tsffi=e Total Existing Impervious sq. ft:
Total Proposed + Existing sq. ft:
->
Percentage Impervious: *
(Imoervious surface -: lot sq. ft)3e%
Site Plan Interior & Exterior Wall Bracing (panel locations shown
on floor plan)
Drainage Plan (if 40% or more impervious)/Typical Wall Framing Details (section from foundation
through roof)
t/Foundation Plan Elevations
Floor Plan 2003 WSEC* Compliance: Prescriptive- Component-
Floor Framing Plan WSEC Construction Checklist (Washington State Energy Code)
Roof Framing Plan Other:
./
Installing Manufactured Home
-Yes
r' t'Co Year:Make:
Was the manufactwed home originally constructed within three (3) years of placement?Yes No
2) Manufactured home must be placed on a permanent foundation with the space from the bottom of the home to the
ground enclosed by either load bearing concrete or decorative concrete or masonry blocks so that no more than one foot ofthe
perimeter foundation is visible above grade; and
3) Roof must be composed of composition, wood shake or shingle, coated metal, or a similar roof material; and
4) Title to the manufactured home must be eliminated as a condition ofbuilding permit approval
P:\DSD\Forms\Building Forms\Application-Residential Building Permit.doc Page 2 of 2
Please check YES or NO as applicable YES NO
I . Is the property within 200 feet of a fresh or saltwater shoreline?
2. Is the property within the Port Townsend Historical District?
3. Is the property located within or adjacent to an sensitive area?
4. Will this proposal involve any sewer, water or other utility extensions that will, or could serve vacant
properties other than the project site? If yes, please attach information identifying the utility extensions and
sites.
5. Have any special conditions been placed on this properfy, or has the property been subject to any
conditions on any prior action of the City (if "Yes" to any of the following, attach copies of appropriate
documents):
Subdivision/Short Plat/Boundary Line Adjustment?
SEPA (environmental review)?
Variance?
Conditional Use Permit?
Street Vacation?
Planned Unit Development?
Restrictive Covenant?/
Easement?
6. Are any properties within 800 feet of the site owned or controlled by the
business associate, or any partnership, corporation, or other entity affiliated
applicant, any relative or
with the applicant? (If ps,
'7 . Have any of the properties listed in item #6 been developed within the last two years? (If attach list.)
8. Have you previously discussed this project with a City staff member? If yes, who and when?
.,\
/^l
CITY OFPORT TOWNSEND RESIDENTIAL BUILDING PERMIT APPLICATION
NEW CONSTRUCTTON, REMODELS, & ADDITIONS
Special Conditions
A pplicanf Certifi cntion
The applicant hereby certifies to have knowledge of those sections of the Intemational Residential Code and the port
Townsend Municipal Code pertinent to the above project and that the applicant is responsible for constructing in conformance with
these codes; the applicant understands that the permit, if issued, expires in six months unless work is started; ihat the permit, after
construction has started, will expire after one year if an inspection is not made to show significant progress on the truiture; the
applicant agrees to abide by the ordinances, codes, regulations, restrictive covenants, deed or plat restrictions, and water and sewer
plans attached hereto; the applicant certifies that all information given above and on accompanying plans i complete and accurate to
the best of their knowledge; and the applicant understands that this information will be reHld upon in granting permits and that if suchinformation is later found to be inaccurate any permits may be withdrawn.
?.
5
P:\DSD\Forms\Building Forms\Application-Residential Building permit.doc Page 3 of 3
CITY OF PORT TOWNSEND RESIDENTIAL BUILDING PERMIT APPLICATION
NEW CONSTRUCTION, REMODELS, & ADDTTIONS
The undersigned hereby saves and holds the City of Port Townsend harmless from any and all causes of action, judgments,
claims, or demands, or from any liability of any nature arising from any noncompliance with any restrictive covenants, plat
restrictions, deed restrictions, or other restrictions which may have been established by parties other than the City of Port Townsend'
Cnmfrlete Applicafion
Port Townsend Municipal Code, Section 16.04.140, Vested fughts - Substantially Complete Building Permit Application:
applications for all land use and development permits required under ordinances of the city shall be considered under the zoning and
other land use control ordinances in effect on the date a fully complete building permit application, meeting the requirementsdentified
in this section, is filed with the Development Services Depafirnent. Until a complete building permit application is filed, all
applications for land use and development permits shall be reviewed subject to any zoning or other land use control odinances which
become effective prior to the date of issuance of a final decision by the city on the application.
An application for a building permit shall be considered complete when an application meeting all of the requirements of
Section RI05.3 of the Intemational Residential Code, 2003 Edition, is submitted which is consistent with all then applicable
ordinances and laws. In addition, to be considered complete, such an application must be accompanied by complete applications for a
subsidiary land use or development permits needed, such as a complete shoreline management permit application and/or complete
applications for other discretionary permits required under the ordinances of Port Townsend. An application for a partial permit under
Section RI05.3.1 of the International Residential Code, 2003 Edition, shall not be considered complete unless it meets all requirements
stated above and contains plans for the complete structural frame of the building and the architectural plans for the structure.
g^r/M 2-tt-"7
Signature of Applicant or Authorized Representative
For Official Use Only
Date
Permit No.hh bi - o'fi BuildingofficialApprovat (r"( Lg\
Date Issued
Balance Due $Date Validation Stamp below
Owner/Representative Date
l-tl-"1
P:\DSD\Forms\Building Forms\Application-Residential Building Permit.doc Page 4 of 4
n z t TU t Water Waste lVater Stom Water 1 inch equat 88.999506 feet ih,i r:ap rs ptvr&:.1,rr ;n "'J rs," "eith di tiLil.i."b?sii. -lh. r'litr ofi,or'llbnr:sroi ard is emplr1tes rtr ror *.rrn::i: a:t v:y rlc ?.cr*r)'ci thc ':i'rn:,r' r": nia,':('.1 i:i this !y!.$. Fk l..l r?iir,'ion ,:i rl,r a.rr.:: of ai ma1 iuiomradu ,s rltc s"lc r. p.rsilJr,'i:hc us.'.'.jkr'?lcar.:':). r'l.'.!'l-1i- i:s-. i,-r.r:(:;rs,:rii:r(tr Fr)riz)rrihiii'rr i rs.C .. os.fi !.s. +anrap iifituhoo.F i
I
2
'.
I
1l
I
2
o .s
\{ry oF,}r>-v v
b
'oo*s .<-
"V
"
N
26
0
'
f\o)
',
oq
?6
1
''
'
.^
-
,
!"
.
.
*
-
.
.
-
\
i
\
€.
+
93
\
.
(\c{
4N
eb
'
-
.q
c
.V 2.
I
:.
-
'
*
-
.
.
i
c^
v
o.
.
"'
'
^-
CV
.
.'
:
i
,t
?
6
8
r-
f
'6
)
F
t-
r
?
-N
*r
-
l
,.
4
.
..
.
.
,
a
t
""
'
t
}f
i
&$:
t
\
l)
bLDof - os?
lvtr?a1 - 62g
Cify of Port Townsend
Development Services Department
BUILDING NUMBER APPLICATION
Name of Property Owner: / [ f . t'n nf 8 r fa nO
Mailing Address
Telephone, 37q - ,< 3 CIA
Pronertv located in:
Addition:Block(s):Lot(s),44
Faces/Access is from:
Parcel Numtrer
Directions to the Propertv (draw vicinitv map on back)
If this is a new ADU, has a building permit been applied for? yes No Date:
Notes:
HOUSB NUMBER ASSTGNBD: 2 Z 4
Date of Approval:v
q /;e l/nru.l /aaP
:ri.,,iiiili :i!ii;
'i :i: i:
CiIY IjF t.r:ll I ui';i'jSliv0
c1J i-l
For address changes: tr Qwest Address Management Center-
Application Fee Received ($3.00, TC 2200\:
fulAR21
Date:
Copy to
i,I:_
534
For Use Onlv:
U
U Finance
U Sheriff
U Public Works
tr Fire Dept
U Police
tr DSD database
fl Post Office
tr GIS
P:\D6D\Depaftnent Forms\Building Forms\Application-Address Number.doc ;6112106
2800
N)(lt
A
/z9Z
Loop
tN)
rL,
?
N)A
-lIa{
2
?
RAINIER ST
EDDY ST
221
(r'
1
h\$
NNzoa-l
Nr{
CLIFF ST
N)N)
J
fctrlllts
SHASTA PL
N
Jrl$-L€{I
N
J
HELENS ST
6
No
J
(Jl
2727
2705
2647
a
6
3
6
Nooo)
N
I i { li.r D:,:.".'a ii 4 n :s:'1i i i;.E
=::( j i 4 =
t;:.;.qi 5 9.1I l.; =..i.P.: ri'
.l: !!: l1:
:- =4 \ aZ aa . r !i. E i .::jl i; i: * 7i !:. zit 1 i !
, jj } c i\:: :i i;:;j'e es' ^ r, Lr i =irf i a€:
=.-.
r E J:?;' a *"".
tN).J-lIl(}))Ip]
2714
2706
2639 2620
2 r?e28N)
J N)
J
l-61| :JJ
N(Jt
J(o
N)s
J
J
Da aResidential Building I ns Checklist
+n&,/nn".""t "'^ f'rrl ilfrr^l* $n, .
City of Port Townsend
Development Services Department
250 Madison Street, Suite 3
Port Townsend, WA 98368
(360) 379-5O95 Fax: {360} 344-4619
Name nnaa-at 8*t"t^Permit#
This checklist is for new dwellings, additions, remodels and garages. The purpose is to show what you intend
to build, where it will be located on your lot, and hor4r it will be constructed.
\
In addition to this form. please submit' t\
. R"rtd""tt"l B"rlding Fermit Application form
. Sensitive Areas Questionnaire
.2001Washington State Energy Code forms. Use either prescriptive forms, or component performance
forms with calculations.
. Washington State Energy Code Construction Checklist
. Two sets of plans. L8" x 24t' plan sheet size is preferred. Plans must be to scale. Vr": 1ft. is preferred.
. If an architect has signed your plans, one set must have an original signature and wet stamp on each page.
o For structures that require engineering (including pole structures, sunrooms, dormers of a certain size,
"irregularly shaped" structures) provide two copies of calculations from a Washington Licensed Architect
or engineer. One set must have an original signature and wet stamp.
treet/Utility Development Permit application, or Minor Improvement Permit application if water and
are already stubbed to the property. For any utility extensions, provide engineered plans.
Two additional copies of the site plan for Public Works (three sets if a septic system is proposed). Please
also include one reduced 8-ll2'x 11" size site plan.
NOTE: Electical Permits are required by the State of Washington Department of Labor & Industies (L&I)
Contact L&I at (360) 417-27Mfor more informntion.
P:\DSD\Forms\Building Fomrs\Application-Residenlial Building Permil PIans Checklisl.rtf
ft
Rev. 8/7/06
Page I of4
Ys Legal description, parcel number, name, address and telephone number of property owner/applicant,
includins cellular ohone if available.
Yg lines and dimensions, including all interior lot lines.
\s All building lines and exterior dimensions (including all dwelling and accessory structures)
\/s
Setbacks from property lines and buildings including structures on neighboring lots. (Indicate roof
overhang. Overhang may extend into setback area a maximum of two feet.) The setbacks shall be
drawn in accordance with an accurate. ninned boundaru line surwev (IBC 106 2)
V4 Driveways, walkways, patios, decks and porches.
On-site parking (Two 9'x 19' spaces required for new residential construction. These spaces may be
orovided in a sarase.)
Trees: Diameter, species name, location and canopy of existing significant trees in relation to
proposed and existing structures, utility lines, and construction limit line.
"Significant trees" are those with a minimum diameter of 12 inches measured at 4-Il2 feet above average grade.
Identi$ all significant trees to be removed by placing an "x" on them, and circle those trees that will remain.
Significant trees removed in relation to and necessary for the construction of buildings, parking and driveways in
connection with the issuance of a building permit are exempt. Exempt activity requires a written exemption issued by
the Development Services Director.
Ys Street names, road easements and easements of record
Existing and proposed utilities, service lines and pipe size.
Slope of land (grade and direction)
Submit an impervious drainage plan, indicating sizes of drainage areas, method(s) of detention, depth
of detention areas, and what materials used
Waterfront property: indicate bank height, setback between building and top of bank or blufl all
creeks, drainage corridors, etc. For new exterior construction, include all structures on either side
within 300 feet" and their setbacks.
Existing and/or proposed septic system, if applicable. Please provide an extra set of plans for the
County Health Department.
List the page-urtnhe.r in the left column for each item that you have included on your plans.
PAGE # SITE / PLOT PLAI\
PAGE# FOUNDATION PLAN
P:tDSD\,Forms\Building Forms\Application-Residential Building Permit Plans Checklist.rtf
0
als Footings, piers, and foundation walls (including interior footing or pier locations).
aB Post and beam sizes and spans; detail beam/post and post/pier (or footing) positive connection.
als Beam pockets or method of securing beam ends
alE Floor joist size, material grade, layout and spans
alit Foundation venting and calculations (l square foot of vent/I50 square feet of crawl space)
3/s Crawl space access & dimensions
Plumbing sizes and locations of foundation penetration
ak Vapor retarder on crawlspace ground (6 mil black polyethylene).
3lq If engineering, show holddown symbol and verbiage on the foundation plan itself
Rev. 8/7/06
Page 2 of 4
3lz Room dimensions, size and by floor level.
4s Braced wall panel locations.
els Smoke detector locations.
Stairwavs: width. rise, run, handrails, guardrails. landings. etc.
3ls Window, skylight and door locations and sizes, with egress and safety $azing, if applicable. (Include
brand/model U factor on
qs Rafter and ceiling joist size, material grade, layout and spans. Roof framing plan required if rafters,if
5lz Attic access location and ditnpnainnc
E<Buqbing fixtures.
Hot water tanks, fu{naces, fireplaces, solid fuel appliances and combustion air ducts
Location of whole house ventilation fan, controls and timer
and cfm of all other fans e.kitchen
Type of exhaust duct material, duct path and exterior termination point of appliance vents and
environmental exhaust ducts.
of all WSEC inlets.
Fire
=lt l-hr. construction between dwelling & garage on garage side.
sls If engineering, show shear wall symbol and verbiage on the floor plan itself
PAGE#FLOOR PLAN
PAGE# WALL SECTION
P:\DSD\Forms\Building Forms\Rpplication-Residential Building permit plans checklist-rtf
Ptev- 8/7 /06
alz F reinforcement vertical below natural and finala/3 Foundation wall. height. width aqd reinforcement (rebar), hold-downs if applicable.als Anchor bolts. washers (2 x 2 t3116 squarq steel) and pressure treated plates.
Thickness ofabFloor ioist size and spacing, under floor clearance from crawl space srade for ioists and beams.2lq Floor and size.
a l.e andallFraming to be used: standard, intermediate or advanced.
a.l4 andalzWall sheathing and sidine and material
ale & location ofweather-
elq and retarder 502.1alqand
elz Insulation material and R in walls above and below and slabaIzwithconnection of roof
^ls Ceiling height.
a/3 Roof sheathing, roofing material, roof pitch, attic ventilation (provide cal culati ons).
Page 3 of4
v
Uq Exterior views on front. rear and sides: show all windows and doors.
Decks, steps, handrails, guardrails, landings.
i 3 Heisht of buildins
Chimneys: show required heieht above roof
Final erade.
Retaining walls, if applicable.
P:\DSD\Forms\Buitding Forms\Application-Residential Building Permit Plans Checklist.rtf
Rev. 8/7/06
Page 4 of4
)
,1
/?,4rN ftooA-Cclggah
-
Vrccrl
5? xzz
ZYZ'I
b f, 43
g x t7
z-K 1
: r,z?s F
a Lrs 'P
= ZrA4
*= r/D
:, t4#
t/ K f s ,fs- d
dr'Jaf[,€r4'.Eb bEc*(
lox6: 60 +
4b6?
&*rt-n(rq-
z{X zz = SzB ,+
Hometime - How-To - Project Help - Framing
$off I u*rv
Fm"arning
Spec$mB Romf Y'eekr"u$ques
Although pre-fabricated trusses
are used to frame the vast
majority of new roofs, there's
almost always a need for hand-
framing to some degree to
finish the roof framing and
some roofs just can't be
trussed
We've collected helpful information on a few of those
hand-framing situations here on this page.
o Y'\rfis':c a $dmw ft Smf* nst HxEstins
ffi.*sf
o F{asr$ Fnam*mg a Smn$$ $-iEp R.cssf
o Frami*q m ffiabl* *qrnmwr
For definitions used throughout this section see
Sgell"$$XS S{{}$SSIY
SVisrg a Nfrw Rqpmff Xrlt* affi ffixfistixtg R.oof
How a new roof ties into an old roof will obviously
depend on the existing structure and the planned
addition, In fact, "tying in" is often not even covered
on an addition plan, being left to the framers'
discretion, But the process usually follows these
steps:
It'r llrtr to 1ot aorr{*rr$l+X
*a$,f gs I sfi[$r I {oilTrc?u3 I 5mx$
Pg$
Ads iy_Geeaaaqsle
Ro*f Fraenins
Home Building Experts
Describe How To Properly
Frame A New Home.
rnrunr,t " i"l GTVP ro. ctt nr
Fn*mingl$_al"s&eil$g
DIY & 1-Day Picture
Framing at Frame Central.
Warehouse Selection.
ivr,vw.{ra mecen lria l.conr
R**f Fnamins
Helpful Links for Roof
Framing
wl#w.10$*ek;r.c0nl
ilnwRK'
B ntert*ckS lL{etal.BqetisE
Never re-roof again. 100%
Financing O.A.C.
$eatil*slSesll{.$n{.com
R**{ Typ*ls nn$ $tyles
Roof illustrations & free
info on materials,
contractors, terms, more
Ro*fFtojrNf .**nt
Page 1 of5
Establishing ridge
point on old roof: Run a &edice_anlhj€_eXe
string along the peaks of
the new trusses, establishing a ridge line, and
extend the string to the old roof along that line
http ://www.hometime. com/Howto/proj ects/framing/frame_6.htm 713112006
WSEC Residential Construction Checklist
City of Port Townsend
Development Services Department
250 Madison Street, Suite 3
Port Townsend, WA 98368
(360) 379-5095 Fax: (360\ 344-4619
Washington State Energy Code (WSEC)
2001 Residential Construction Checklist
Complete this form in addition to WSEC forms. Please answer the following questions:
TYIE OF'PROJECT:
Er1.{ew construction, or addition over 750 square feet
Must meet whole house and spot ventilation requirements, and show full WSEC compliance as
a stand-alone project. A detached, habitable structure such as an Accessory Dwelling Unit
regardless of size must also meet these requirements.
! House addition under 750 square feet
Possible trade-offs are allowedwith the existingbuildingfor WSEC compliance, such as
increasing ceiling insulation. See WSEC component perforrnance forms.
NOTE: A house addition less than 500 sq.ft, does not require whole house ventilation.
Spot ventilation is still required.
TYPE OF HEATING - Please check all that annlv:
Elecpic
6Wall Heater ! Baseboard n Forced Air Furnace tr Radiant Floor (B'oiler) ! Other
--Non-Electric:
Propane:Z Radiant Floor/Baseboard (Boiler) ! LPG Stove ! LPG Furnace ! Other LPG
n Heat Pump tr Oil Furnace tr Woodstove (can only be used as secondary heat source)
VAPOR RETARDERS:
Vapor retarders shall be installed toward the warm surface as represented below. Select one
option for floors, walls, and appropriate ceilings:
o Floors:
d6rywoodwith exterior glue
W6ry plastic (greater than or equal to 4 millimeter thick)
ffiacked batts
oW
ly plastic (greater than or equal to 4 millimeter thick)
backed batts
paint
o Ceilings:
I Not required where ventilation space averages greater than or equal to 12 inches above
insulation
# ace-stapled, backed batts! Poly plastic (greater than or equal to 4 millimeter thick)
E/Low-perm paint
SEE BACK
P:\DSD\Department Forms\Building Forms\Application-Residential Energy Code Checklig.doc
Page I of I
WASHINGTON STATE VENTILATION AND INDOOR AIR OUALITY (2000 Code):
Type of ventilation used throughout the house: n HVAC Integrated Option tr Exhaust Option
Whole House Fan for 6'Exhaust Option":
o In what room is your whole house fan located?
o What size is the whole house exhaust fan?ry50-75 CFM (1-2 bedroom house)
rwdo-tzo CFM (3 bedroom house)
! 100-150 CFM (4 bedroom house)
n 120-180 CFM (5 bedroom house)
Note: the whole house fan shall be readily accessible and controlled by a}4-hout clock timer
with the capability of continuous operation, manual and automatic control. At the time of final
inspection, the automatic control timer shall be set to operate the whole house fan for at least 8
hours a day, and have a sone rating at 1.5 or less measured at 0.10 inches water gauge.
Spot Ventilation:
Source specific exhaust ventilation is required in each kitchen, bathroom, water closet, laundry
room, indoor swimming pool, spa and other rooms where excess water vapor or cooking odor is
produced. Bathrooms, laundries or similar rodms require fans with a minimum 50 cfm rating at
0.25 inches water gauge; kitchens shall have a fan with a minimum 100 cfm rating at0.25 inches
water gauge.
Outdoor Air Inlets:
Outdoor air shall be distributed to each habitable room by means such as individual inlets,
separate duct systems, or a forced-air system. Habitable rooms include all bedrooms, living and
dining rooms but not kitchens, bathrooms or utility rooms. Where outdoor air supplies are
separated from exhaust points by doors, undercutting doors a minimum of V:.inch above the
surface of the finish floor covering, distribution ducts, installation or grilles, transoms or similar
means where permitted by the Uniform Building Code. When the system provides ventilation
through a dedicated opening, such as a window or through-wall vent, these openings must:
o Have controlled and secure openings
r Be sleeved or otherwise designed so as not to compromise the thermal properties of the wall or
window in which they are placed.
I Provide not less than 4 square inches of net free area of opening for each habitable space.
What type of fresh air inlet will be installed? (See figure below)
udindo* Ports /
! Wall Ports
P:\DSD\Departnent Forms\Building Forms\Application-Residential Energy Code Checkli$.doc
Page2 of2
-") ')
Prescriptive Approach - Simple Form
FortheWashinst*.i,,fi,i,"tfi
ln"rr""de(2001Edition|
Lot:
Site lnformation
q4
Address:
City:Dn*
State:UA,Ap:qyr68
contact: T o D D € s lcP I lv,
Phone: 'J bt 3YS- q(c{ (
Phone 2: 3o t -11t ?
Building Department Use Only
Permit #:
Notes:
F
Table6-l
PRESCnIPTIVE REQUIREMEnTN qt FOn CnOUp R (rcCUpANcr
CI,II}{{IEZI)NE I
text
This project complies with the following:
{ tne project is a single fanily residence or duplex.
{ m"project is wood frame OR all of the insulation is interior or exterior of the fianring.y' m UuitOing components meet the requirements listed in Table G1, Option lll.
{ tne project will nreet alt other provisions of the WSEC and MAQ.
The project will take advantage of the following exceptions to the prescriptive option:
O 602.6 Exception 1. One door, that is 24 ft.2 or less, that does not meet the standards is allowed.
Localion of the door taking this exception
O 002.0 Exception 2. Doors with a tlfac{or of 0.40 allorved without calculations, Option ll! only
Location of the door(s) taking this exception
Copyrbt{ 20o2, WSUCEEP@-6
Copbd by pemission ftom the Washirqton State University Cooperative F;tension Energy Program
GlazingU-Factor
Option
Glazing
Arealo
% ofFloor Vertical IOverheadl
Dool
U.
factor
Ceiling3 Vaulted
Cei[nd
Wall
Above
Grade
Wall
InC
Below
Grade
Wall
Ed4
Below
Grade
Floof
Slab'
Ort
Grade
m Untimited
GroupR-3
Occupancy
Onlv
0.40 0.58 0.24 R-38 R-30 R-21 R-21 R-10 R-30 R-10
Prescriptive - Simple F.orm - Climate bnc 1 5B1nW2
2001 ED|TTON
p REsc Rr prvE REe u' REMHlrbEqfJo * G Rou p
cLTMATE zorue@
R OCCUPANCY
Option
Glazino
Arear{
% of Floor
Glazino U-Factor
Door e
U-Factor Ceiling2 Vaulted
Ceilin93
Wall
Above
Grade
Wall.
inta
Below
Grade
Wall.
exta
Below
Grade
Fbof
Slaba
on
GradeVerticalOverheadl1
I.l2o/o 0.35 0.58 0.20 R-38 R-30 Rl5j R-15 R-10 R-30 R-10
II.*ls%o o.40 0.58 0.20 R-38 R-30 'x-Lt R-21 R-10 R-30 R-10
m Unlimited
Group R-3
Occupancy
Only
0.40 0.58 0.20 R-38 R-30 R-21 R-21 R-10 R-30 R-10
* Refere,nce Case
0. Nominal R-values are forWood frame assemblies only or assemblies built in accordanc,e with Section 601.1.
l. Minimum requirements for each option listed. For example, if a proposed design has a glazing ratio to the conditioned floor
areaof 13Vo, it shall comply with all of the requirements of the l5o/o glazingoption (or hrgher). Proposed designs which cannot
meet the specific requirements of a listed option above may calculate compliance by Chapters 4 or 5 of this Code.
2. Requirement applies to all ceilings except single rafter or joist vaulted ceilings. 'Adv' denotes Advanced Framed Ceiling.
3. Requirement applicable only to single rafter orjoist vaulted ceilings.
4. Below grade walls shall be insulated either on the exterior to a minimum level of R- 10, or on the interior to the same level as
walls above grade. Exterior insulation installed on below grade walls shall be a water resistant material, manufactured for its
intended use, and installed according to the manufacturer's specifications. See Section 602.2.
5. Floors over crawl spaces or exposed to ambient air conditions.
6. Required slab perimeter insulation shall be a water resistant material, manufactured for its intended use, and installed
according to manufacturer's specifications. See Section 602.4.
7. Int. denotes standard framing 16 inches on center with headers insulated with a minimum of R-5 insulation.
8. This wall insulation requirement denotes R-19 wall cavity insulation plus R-5 foam sheathing.
9. Doors, including all fire doors, shall be assigned default U-factors from Table l0-6C.
10. Where a maximum glazing area is liste4 the total glazing area (combined vertical plus overhead) as a percent of gross
conditioned floor area shall be less than or equal to that value. Overhead glazngwith U-factor of U:0.40 or less is not included
in glazing area limitations. ,
1 1. Overhead glazing shall have U-factors determined in accordance with NFRC 100 or as specified in Section 502. I .5.
12. Log and solid timber walls with a minimum average thickness of 3.5" are exempt from this insulation requirement.
Effedive 7l01l02 33
a
Receipt Nunber:
BLDOT -054 955900044 Plan Review Fee $926.22 $150.00
Total: $150.00
$776.22
HECKc 6070 $ 150.00
$1s0.00Total
genpmtrreceipts l?rge 1 of 1
))
Cify of Port Townsend
Development Services Department
CzuTICAL AREAS QUESTIONNAIRE
Permit applications are reviewed by our staff to make a preliminary determination ofthe presence or
absence of a Critical Area on the property, pursuant to Chapter 19.05 of the Port Townsend
Municipal Code. To help us make this determination, please supply the following information.
General Information:
Critical Area
9
b
B//J/,"^Phone: ltoo -37 ?^fjApplicantName:A.1,|OA
t13Mailing Address:
Property Address (if different):
Description of Proposal (include site plan):
The proposed new construction creates square feet of impervious surface. What best
management practices are proposed?'flffce*e6 o€ +tat.1 Sr.e-.s?r<-\cA- Qoa pCr-r-rrt-tO'rr
l. Is any portion of the property within or near a mappedCritical Area?
(Maps are available at the Development Services Department)
YES X NO
ls there any standing or running water on the surface of the siteat any time during the year?
Yes Y No If YES, please describe:
2
Has any portion of the site been identifed as a wetland?
If YES, please describe:
XNoaJYES
Is the site characterized as:
Forest Ir,ieadow
4.
V Cleared Mixed
P:\DSD\FormstJ-and Use FormCrApplicationCriticat Areas euestionnaire.doc
(0%- 5%)
Critical Slope- 40Vo or greater
5.theoftheIsSlope property:gentle slope
(s%- ts%)
steep slope
(rs%-40%)
cr{ticsl Slopc
4096 or gcqtcr
Stccp Slope
t5o,b - 4Ot i
Gcntlc 596 - 15gt
Flet-O-596
The applicant hereby certifies that all of the above statements and the information contained in any other
transmittals made herewith are true, and the applicant acknowledgesthat any action taken by the City of Port
Townsend based in whole or in part on this apptication may be reversed if it develops th at any such statement
or other information contained herein is false.
The applicant understands that the determination of the Director may be appealed by the applicant or by any
other party by following the appeal procedure outlined in Chapter I . 14 of the Port Townsend Municipal Code.
Any appeal must be filed within seven calendar days from the Notice of a final decision.
2 -11-o1
Signature of Applicant Date
>400
40%
t5%
0%
X'OR DEPARTMENT USE ONLY:
Reviewed by:Date:
Site visit Required? NO YES Site visit made on:
Exempt per PTMC 19.05.040 (C)? NO YES
Threshold Determination (presence/absence of Critical Area, type of Critical Area):
Shorelines Jurisdiction?NO YES
P:\DSD\Forms\Land Use FormdrApplicationCritical Areas Questionnaire.doc
LrNDBsffiARCHI%:ECTS
)cw
'319 s. peabody, zuite b; port angeles,wa98362
360.452.6t16 I tax 36A.452.i a64
l hn
of
P"W t ALvvl 6 w ot-&,sw tp*c;rtuuais'Lr* Frffilom?6ut trtr?;+ {uvrlc,, w4
WW%p{ (; )oo rlaprr >
flV}vr).* L+-
9s thnt o: vL"
Sheet
I
I
lr
i:
i
I
I
llAR ll 1. )i',l,l
t
#
LINDBER@#hAITI{A R C H I-B*IE C T S
319 S, Peabody, Suite B., Port Angeles, WA 98362
360.452.6116 / fax 3 6Q.452.7 064
contaot@.lindarch.com / www.lindarch.com
Proj ect: ?=t"Ar/r EE+
Subject:
Date:
Lpr6.rw>
SHEARWALL SUMMARY
ectNo.
Y
Sheet of
{/'
ll
w L H V YlL SW YH.WL/2 POST HOLD DOWN
$4 a,b Z4a 7 &
&zl 4ss +s &
c za'4 1121 7t &
2at I t4fl ttI fr.r.ru5w,P {t?l,s5l
I ota 4s b€Lbr E
I 2z 7za 9&h
lSzt 3'ruw'*'ffise-6 ltAs ?n4 2b
b -itz"{12,16 1317 l8z
FJEE 9e1b rt*Pupz-bffiT4.5 3e61
o 2,o tt
i V0 6o lb*&
o 20 {t IfigL q4 a
b\4 Anr**sg B iLt ,')YN 'cAltpS
dJ ryVP46'ti eb*T
n,7a\-
1tr\U a'7
\
VALLOFIT/FRMINFO/FORMS/SHEARWAI
1
z
3.
A. 'PL-YWOOD OR O.S.B, SHEAR WALLS
MAXIMUM SHEAR = 250 P.L.F
usE yl SHEATTNG - ONF SIDE OF WALL. NAIL ALL EDGES WTH. 8d NATLS AT 6'
O.C. FOR FRAMING, USE DF NO.2. PROVIDE Y;'DIAMETERANCHOR BOLTSAT
32" O.C- MMIMUM SPACING AT THE FOUNDATION. FOR TIE DOWNS AT EACH
END OF THEWALL, SEE FRAMING/SHEARWALL PLANS.
MAXIMUM SHEAR = 315 P.L.F.
USE Y"" SHEATING - ONE SIDE OF WALL. NAIL ALL EDGES WITH Bd NAILS AT 5"
O.C. FOR FRAMING, USE DF NO.2. PROVIDE Y"" DIAMETER ANCHOR BOLTS AT
32" O.C. MAXIMUM SPACINGATTHE FOUNDATION. FOR TIE DOWNSAT EACH
END OF THE WALL, SEE FR.AMING/SHEAR WALL PLANS.
MAXIMUM SHEAR = 375 P.L.F.
USEY; SHEIffING - ONE SIDE OF WALL. NAIL ALL EDGES W|TH Bd NAILS AT 4'
O.C. FOR FRAMING, USE 3X DF NO.2. PROVIDE %" DIAMETER ANCHOR BOLTS
AT 24: O.C. MAXIMUM SPACING ATTHE FOUNDATION. FOR TIE DOWNS AT
EACH END OF THE WALL, SEE FRAMING/SHEAR WA,LL PLANS.
MAXTMUM SHEAR = 490 P.L.F.
USEY2" SHEATING _ ONE SIDE OF WALL. NAIL ALL EDGES WITH Bd NAILS AT 3'
O.C. FOR FRAMING, USE 3X DF NO.2. DOUBLE BOTTOM PLATESARE
REQUIRED, BOLT THROUGH BOTH PLATES W|TH ANCHOR BOI.TS. PROVIDE 5/8"
DIAMETER ANCHOR BOLTS AT 32" O.C. MAXIMUM SPACING AT THE
TOUruORIOI.I. FOR TIE DOWNS AT EACH END OF THE WALL, SEE
FRAMING/SH EAR WALL PLANS.
MAXIMUM SHEAR = 560 P.L.F
usEw SHEAT|NG -ONE S|DE OF WALL. NATLALL EDGESWTH 10d NA|LSAT3"
o.c. FoR FMM|NG, U$E 3X DF NO.2. DOUBLE BOTTOM PLATESARE
REQUIRED, BOLT THROUGH BOTH PLATES WTH ANCHOR BOLTS. PROVIDE 5/8"
DIAMETER ANCHOR BOLTS AT 2 4" O,C. MAXIMUM SPACiNG AT THE
FOUNDATION. FOR TIE DOWNS AT EACH END OF THE WALL, SEE
FRAMI NG/SH EAR WALL PLANS.
Mexvrurrlt sHEAR = 685 P.L.F
U$E7z"SHEA+|NG-ONE SIDE OFWAtL. -NAlt ALL EDGES WITH 10d NAITSAT
21t2" O.C. STAGGERED. FOR FRAMING, USE 3X DF NO.2. DOUBLE BOTTOM
PLATES ARE REQUIRED, BOLT THROUGH BOTH PLATES W|TH ANCHOR BOLTS.
PROVf DE 5/8" DIAMETERANCHOR BOLT.S NT 20".O.C. MAXIMUM SPACING ATTHE' FOUNDATTON. FOR TtE DOWNS AT EACFI ENp OF THE WALL, SEE
FI{AMING/SH EAR WALL PLANS.
.MAXIMUM SHEAR = 770 P.L.F.
usET; SHEATING - ONE SIDE OF WALL. NA|L ALL EDGES WITH 10d NAILS AT
2''o.i- sTAGGERED. FoR FRAMTNG, usE 3x DF No.2. DoUBLE BorroM
PLATES ARE REQUIRED, BOLT THROUGH BOTH PLATES WTH.ANGHOR BOLTS.
PBOYIDE 5/8" DTAMETER ANCHOR BOLTS AT 18" O.C. MAXTMUM SPACTNG AT THE
FOUNDATION. FOR TIE DOWNS AT EACH END OF THE WALL, SEE :
FMMING/SHEAR WALL PLANS.
4.
A
b.
7
T
8.
9.
10.
11.
12.
MAXIMUM SHEAR = 870 P.L.F
isey;, SHEATTNG-BoTH SIDE oFWALL. NAILALL EDGESWITH Bdryry!947
iTtz; O.c. FOR FRAMING, USE 3X DF NO.2. DoUBLE BOTTOM PLATES ARE
neOUrnEo, BOLT THRoU6H BOTH PLATES WTH ANCHOR BoLTS. PRoVIDE 3/4"
prnn r iren ANCH o R Bo Lr€ s t 20" o- c- MAXIM UM S f{Cl ll I lT-TJ1E
FoUNDATIoN. FoRTIE DoWNSAT EACH END oFTHEWALL, SEE
FRAMI NG/SH EAR WALL PLANS.
MAXIMUM SHEAR = 980 P.L.F.
i,se. %" sHEAING _ BorH stDE oF wALL. NAIL ALL FLGFq ryr_T.!_B^d l\t\LLS Ar
3" O.i. FOR FRAMING, USE 3X DF NO2. DOUBLE BOTToM PLATESARE
nrOuineo, Boti'iHRoUGH BoTH PLATES WTH ANcHoR BoLTs. PRovlDE 3/4"
DIAMETER ANCHOR BOLTS AT 18" O.C. MAXIMUM SPACING AT THE
F6i,r-r.rpnrror'r, FoR TIE bowNs AT EAcH END oF THE wALL, sEE
FRAMI NG/SHEAR WALL PLANS.
MAXIMUM SHEAR = 1,20A P.L'F,
.JSEY;'SHEATING _ BOTH SIDE OF WALL. NAIL ALL EDGES WITH 1Od NAILS AT
A'O.C. STAGGERED. FOR FRAMING, USE 3X DF NO.2. DOUBLE BOTTOM
Fi.qiEs nCE nEourneD, BoLT THRoUGH BorH PLATES wJTH ANcHoR BoLTS.
PROVIDE.3/4' DIAMETERANCHOR BOLTS AT 14" O.C. MAXIMUM SPACING ATTHE
FOUNDATION. FOR TIE DOWNS AT EACH END OF THE WALL, SEE
FRAMI NG/SH EAR WALL PLANS.
MAXIMUM SHEAR = 1,540P.L.F.
usEy; SHEATING- BOTH SIDE OF WA!1. NAIL ALL EDGES Wql 10d NAILS AT
2' O.C. STAGGEREb. FOR FRAMING, USE 3X DF NO.2. DOUBLE BOTTOM
PLATES ARE REQUIRED, BOLT THROUGH BOTH PLATES WTH ANCHOR BOLTS.
PRoVIDE 314" DIAMETERANCHOR BOLTS Nf 11, O.C. MMIMUM SPACINGATTHE
FOUNDATION. F'OR TIE DOWNSAT EACH END OF THE WALL, SEE
FRAMING/SHEAR WALL PLANS.
MAXIMUM SHEAR = 1,74A P.L.F.
USE 5/B'SHEATING - BOTH SIDE OFWALL. NAILALL EDGESWTH 1Od NAILSAT
2N O.C. STAGGERED. FOR FRAMING, USE 3X DF NO.2. DOUBLE BOTTOM
PLATES ARE REQUIRED, BOLT THROUGH BOTH PLATES WITH ANCHOf, BO_{9
PROVIDE 314" DIAMETER ANCHOR BOLTS AT 9' O.C- MAXIMUM SPACING AT THE
FOUNDATION. FOR TIE DOWNSAT EACH END OF THE WALI-, SEE
FMMING/SHEAR WALL PLANS.
CITY OF PORT TOWNSEND
PERMIT ACTIVITY LOG
PERMTT# 9 Lb7-a\q
SCOPE OF WORK:
DATE RECEIVED 3 7I
DATE ACTION INITIALS
ENTERED INTO CHET rn 0-Lri--
I CA-to Planning - No evidence I
CHECKED FOR COMPLETENESS
,?Dpae*s nFfzaaerl3 224q H)6/tLAarr/ /-npF "-,r
i {L-*il Kp,NtEt -.1 K c-(-
A)o P.\A - Sef lfaz"r'H-r, /*u>t* P /D.*."r-ea-**'d (r^l
I ' -F (')-(ac)'., lrtrntte,Do<,t{ tzto rt-Je-aAzn {-<L,+I t.rA ^l/-c"J'fullruts RiT'.s<*bqcLr*' ok .1--u*Sf
/l/a'*-ee /\rt^'/2" { F, d/bdbe e-zt,--^) 1r,,^.,./ )o'o^/. ^n J- lrt
(a d.e fu*4urD*'^ ? 4J tr A . r) 7^ ;; n.- ./ta,27-az
- -l gl^ra
al/duf r)A ae-/rq r(- J & E" ^ ,tr/ OJ-( - -
s1 /)r'\<l ,hA,06
\uru )Yn"' ^.d r {-L.6 o
^,11)t'"LIA
(Jant-trl K) 0tt-r
{
CITY OF PORT TOWNSEND
DEVELOPMENT SERVICES DEPARTMENT
INSPECTION REPORT
For inspections, call the Inspection Line at 360-385-2294 by 3:00 PM the day before you want
the inspection. For Monday inspections, call by 3:00 PM Friday.
NUMBER:DATE OF'INSPECTION:
SITE ADDRESS:
PROJBCT NAME: T5T
a
CONTRA R:
CONTACT PERSON:PHONE:
TYPE OF INSPECTIOIIK.
rlC L /l L-< .
! APPROVED WITH
CORRECTIONS
Ok to proceed. Corrections will be
checked at next inspection
r /xor APPRovED
Call for re-inspection before
proceeding.
Inspector oxe 4-a1 -06
Approved plans and permit card must be on-site and available at time of inspection. A re-inspection fee may
be assessed if work is not ready for inspection.
'i
CITY OF PORT TOWNSEND
DEVELOPMENT SERVICES DEPARTMENT
INSPECTION RBPORT
For inspections, call the Inspection Line at 360-385-2294 by 3:00 PM the day before you want
the inspection. For Monday inspections, call by 3:00 PM Friday.
DATE OF TNSPECTTON: q->zag PERMIT NUMBER: 7 -gf
SITE ADDRESS: 2,ZLl4r
PROJECT NAME:
CONTACT PERSON:
TYPE OF INSPECTION:lit u*,-
CONTRACTOR:
PHONE:
^/
C
2.l6 .a Sb
0,,*,
3 YLT
1t It
M
,}
331 \
! APPROVED
Inspector
4,zg_o(
/a>
'c bod6
J/C4F
5F
APPROVED
re-inspection before
ing.
,6
u
Approved plans and permit card must be on-site and available at time of inspection. A re-inspection fee may
be assessed if work is not ready for inspection.
I
CITY OF PORT TOWNSEND
DEVELOPMENT SERVICES DEPARTMENT
INSPECTION REPORT
For inspections, call the Inspection Line at 360-385-2294 by 3:00 PM the day before you want
the inspection. For Monday inspections, call by 3:00 PM Friday.
DATE OF INSPECTION:PERMIT NUMBER: bLI O) - O E?
SITE ADDRESS:bl
PROJECT NAME:CONTRACTOR:
CONTACT PERSON:PHONE:
TYPE OF INSPECTION
IL
L'tck L
L / r<)
I
a
v
o4
VL%frJTarttlol1- o F f/o u%E*
N APPROVED ! APPROVED WITH
CORRECTIONS
Ok to proceed. Corrections will be
checked at next inspection
! NOTAPPROVED
CalI for re-inspection before
proceeding.
Date 7/ 2 Y/o>Inspector
Approved plans and permit card must be on-site and availqble at time of inspection. A re-inspection fee may
be assessed if is not ready for inspection.
-TO lNloL*Tn' *TT",rcua- LeY
El.-fiffi/uz-A.L PJqtrfMP W1,\
CITY OF PORT TOWNSEND
DEVELOPMENT SERVICES DEPARTMENT
INSPECTION REPORT
For inspections, call the Inspection Line at 360-385-2294by 3:00 PM the day before you want
the inspection. For Monday inspections, call by 3:00 PM Friday.
DATE OF INSPECTION:7 --3ll-b-7 PERMIT NUMBER:
SITE ADDRESS:
PROJECT NAME:R:
CONTACT PERSON:PHONE:3
TYPE OF'INSPECTION:
! APPROVED ! APPROVED WITH
CORRECTIONS
Ok to proceed. Corrections will be
checked at next inspection
! NOTAPPROVED
Call for re-inspection before
p
Inspector Date
Approved plans and permit card must be on-site ond available at time of inspection. A re-inspection fee may
be assessed if work is not ready for inspection.
CITY OF PORT TOWNSEND
DEVELOPMENT SERVICES DEPARTMENT
INSPECTION REPORT
For inspections, call the Inspection Line at 360-385-2294 by 3:00 PM the day before you want
the inspection. For Monday inspections, call by 3:00 PM Friday.
\J^r^€l - Jb -O l penmlr
R i rarn CONTRA
PHONE: .V 1\ I qq3
t'r3
TYPE OF INSPBCTION:Yrnr^nin a
! APPROVED ! APPROVED WITH
CORRECTIONS
Ok to proceed. Corrections will be
checked at next inspection
! NOTAPPROVED
Call for re-inspection before
Inspector Date
Approved plans and permit card must be on-site ond availoble at time of inspection. A re-inspection fee may
be assessed if work is not ready for inspection.
))
-^)'---)
CITY OF PORT TOWNSEND
DEVELOPMENT SERVICES DEPARTMENT
INSPECTION REPORT
For inspections, call the Inspection Line at 360-385-2294 by 3:00 PM the day before you want
the inspection. For Monday inspections, call by 3:00 PM Friday.
DATE OF INSPECTION: -7 - q - 01 PERMIT
SITE ADDRESS:
PROJECT NAME:.AA', L l.r'..' n ri lrn
CONTACT PERSON:PHO ?ot-g*aq qD
TYPE OF INSPECTION:
! APPROVED ! APPROVED WITH
CORRECTIONS
Ok to proceed. Corrections will be
checked at next inspection
! NOTAPPROVED
Call for re-inspection before
Inspector tc.Date
Approved plans and permit card must be on-site and available at time of inspection. A re-inspection fee may
be assessed if work is not readyfor inspection.
Irt €'
CITY OF PORT TOWNSEND
DEVELOPMENT SERVICES DEPARTMENT
INSPECTION REPORT
For inspections, call the Inspection Line at 360-385-2294 by 3:00 PM the day before you want
the inspection. For Monday inspections, call by 3:00 PM Friday.
l'tz- D7 PERMTTNUMBER: SLbo 7- a 52DATE OF INSPECTION:
srrE ADDREss: ZZA|q 4iC/t/a.a> bl
PROJECT NAME:
CONTACT PERSON:
TYPE OF INSPECTION:
B CONTRACTOR:e
PHONE:
77ry d {3q
(*r*ou"o N APPROVED WITH
CORRECTIONS
Ok to proceed. Corrections will be
checked at next inspection
tr NOTAPPROVED
Call for re-inspection before
proceeding. .b\wlot
Inspector Date
Approved plans and permit must be on-site and available at time of inspection. A re-inspection.fee may
be assessed if work is not ready for inspection.
rM I
CITY OF PORT TOWNSEND
DEVELOPMENT SERVICES DEPARTMENT
INSPECTION REPORT
For inspections, call the Inspection Line at 360-385-2294 by 3:00 PM the day before you want
the inspection. For Monday inspections, call by 3:00 PM Friday.Il'Dc
PERMIT NUMBER: A[-\ 01 -O flDATE OF'INSPECTION:
SITE ADDRESS:
PROJECT NAME:
CONTACT PERSON:
TYPE OF'INSPECTION:
CONTRA
k!'
CTOR:
PHONE:
::\
^)L ft-'
L
tr APPROVED tr APPROVED WITH
CORRECTIONS
Ok to proceed. Corrections will be
checked at next inspection
Inspector Date
Approved plans and permit card must be on-site and available at time of
tr NOTAPPROVED
Call for re-inspection before
be assessed if work is not ready for inspection
lns A re-inspection fee may
CITY OF PORT TOWNSEND
DEVELOPMENT SERVICES DEPARTMENT
INSPECTION REPORT
For inspections, call the Inspection Line at 360-385-2294 by 3 :00 PM the day before you want
the inspection. For Monday inspections, call by 3:00 PM Friday.
L '2b - OTprnrvur NUMBER:DATE OF INSPECTION:
SITE ADDRBSS:724q 4*',aklanA
PROJECT NAME:I f-la Y^i^f,*conrnrc?on,M ii]e.' " '.'^CONTACT PERSON:
TYPE OF
PHONE:
TION:
! APPROVED ! APPROVED WITH
CORRECTIONS
Ok to proceed. Corrections
checked at next inspection
Inspector R Date
Approved plans and permit card must be on-site and available ot time of inspection. A re-inspection fee may
be assessed if work is not ready for inspection.
! NOTAPPROVED
Call for re-inspection before
CITY OF PORT TOWNSEND
DEVELOPMENT SERVICES DEPARTMENT
INSPECTION REPORT
For inspections, call the Inspection Line at 360-385-2294by 3:00 PM the day before you want
the inspection. For Monday inspections, call by 3:00 PM Friday.
DATE OF'INSPECTION:
SITE ADDRBSS:
PROJECT NAME:
CONTACT PERSON:
TYPE OF'INSPECTION:
22 NUMBER:
PHoNE: 1bl- qql3
LL
CONTRA R:
fL t/L t/L [?n- s U/A.L\
LL
! APPROVED WITH
CORRECTIONS
Ok to proceed. Corrections
at next inspection
! APPROVED ! NOTAPPROVED
Call for re-inspection before
proceeding.
rtr,be
Inspector Date
Approved plans and permit card must be on-site and available at time of inspection. A re-inspection fee may
be assessed if work is not readyfor inspection.
May 3'1 ,2007
Jefferson County
Permit Center
621 Sheridan Street
Port Townsend, WA 98368
RE: Millennium One Homes, Biram Residence
Dear R. Taylor:
We have reviewed the shear walls on the Biram Residence as requested. The
wall in question is located on the south wall of the utility room.
The lateral calculations call for the south wall of the utility room to be a shear wall
and to have hold downs at each end. The hold downs are called out to be
Simpson PHD2-SDS3 hold downs with Simpson SSTB 14 anchor bolts. There
is to be a concrete footing below this wall in which the anchor bolts are to be
installed. Threaded rod may be used to extend the anchor bolt up into the wall
above the crawl space to the hold downs installed at the base of the wall. The
pony wall in the crawl and the upper wall are to be sheeted with /2" sheeting one
side and nailed as per the shear wall scheduled number '5'. This calls for
double bottom plates in the upper wall and pony wall and 3x material at alljoints
in the sheeting. All edge nailing at this shear wall to be (10d) nails at three
inches on center. Anchor bolts are to be 5/S" diameter bolts with a maximum
spacing of 24" on center.
lf you have any additional questions please contact us
Respectfully,
LINDBERG & SMITH ARCHITECTS,INC., P.S.
Charles D. Smith, Architect
\)
CITY OF PORT TOWNSEND
DEVELOPMENT SERVICES DEPARTMENT
INSPECTION REPORT
For inspections, call the Inspection Line at 360-385-2294 by 3:00 PM the day before you want
the inspection. For Monday inspections, call by 3:00 PM Friday.
DATE OF INSPECTION:
SITB ADDRESS:
PROJECT NAME:
CONTACT PERSON:
TYPE OF INSPECTION:
PERMIT NUMBER:
CONTRACTOR:
bL E'
PHONE:
iLT 0 r.)L
1 I
6 Ap /\!) .-:T^ r)-, -<ftr V .---4(_* L//.-- -! L/ ' .__/ t_)( ' q*
! APPROVED
Inspector
! APPROVED WITH
CORRECTIONS
Ok to proceed. Corrections
checked at next inspection
! NOTAPPROVED
Call for
Date s/zs/ct2T
Approved plans and permit card must be on-site and available ot time of inspection. A re-inspection fee may
be assessed if work is not ready for inspection.
CITY OF PORT TOWNSEND
DEVELOPMENT SERVICES DEPARTMENT
INSPECTION REPORT
For inspections, call the Inspection Line at 360-385-2294 by 3:00 PM the day before you want
the inspection. For Monday inspections, call by 3:00 PM Friday.
DATE OF INSPECTION:
SITB ADDRESS:
PROJECT NAME:
CONTACT PERSON:
C
NUMBER:
R:
PHONE:
TYPE OF'INSPBCTION:i")L-,{j
.t?r(.
(I L]d 1()/\)
aN- j fttq tL- 'LL/A
L) (t1-
t-,{.(,{/{'\ (---l
! APPROVED ! APPROVED
CORRECTIONS
Ok to proceed.
checked at next rnsp ection
nD'
Date
Approved plans and permit card must be on-site and available at time of ir,
be assessed if work is not ready for inspection.
E't -R